ATuMan LS-P 40m Laser Distance Meter User Manual

1. Utangulizi

The ATuMan LS-P 40m Laser Distance Meter is a high-precision, portable device designed for accurate and reliable measurements. It integrates multiple functions including distance, area, volume, angle, and Pythagorean measurements, making it a versatile tool for various applications.

Key features of this device include:

High precision for accurate and reliable measuring.
11 functions controlled with two intuitive keys.
Supports up to 3500 measurements on a single charge.
Capable of volume, angle, area, and distance measurements.

ATuMan LS-P 40m Laser Distance Meter front view

Kielelezo 1: Mbele view of the ATuMan LS-P 40m Laser Distance Meter, displaying its screen and single control button.

2. Kuweka

2.1 Kuchaji Kifaa

The LS-P 40m is equipped with a built-in Lithium Ion battery. Before first use, or when the battery indicator shows low power, charge the device using the provided USB cable.

Connect the small end of the USB cable to the charging port on the side of the device.
Unganisha ncha nyingine ya kebo ya USB kwenye adapta ya kawaida ya nishati ya USB (haijajumuishwa) au mlango wa USB wa kompyuta.
The charging indicator on the screen will show the charging status. A full charge supports approximately 3500 measurements.

ATuMan LS-P 40m Laser Distance Meter connected to a USB charging cable

Figure 2: The LS-P 40m device connected to a USB cable for charging, highlighting its USB flash charging capability.

2.2 Kuwasha / Kuzima

To power on: Press and hold the main button until the screen illuminates.
To power off: Press and hold the main button until the screen turns off. The device also features an automatic power-off function after a period of inactivity to conserve battery.

3. Maagizo ya Uendeshaji

The LS-P 40m features a simple two-key control system for all its 11 functions. The primary button is used for measurements and mode selection, while the secondary button (if present, or a long press of the primary) is for switching modes or clearing data.

Two ATuMan LS-P 40m devices showing high precision, 11 functions, and 3500 measurements

Kielelezo 3: Zaidiview of the device's capabilities, emphasizing its high precision, 11 functions, and long battery life for up to 3500 measurements.

3.1 Kipimo cha Msingi cha Umbali

Ensure the device is powered on and in basic distance measurement mode (usually the default).
Elekeza boriti ya laser kwenye uso unaolengwa.
Press the main button once to activate the laser.
Press the main button again to take the measurement. The distance will be displayed on the screen.

Illustrations of distance and area measurement applications

Kielelezo 4: Kutamples of practical applications, including distance measurement for furniture and area measurement for a window.

3.2 Kipimo cha Eneo

Switch to Area Measurement mode. This is typically done by pressing the mode button until the area icon appears on the screen.
Measure the length of the first side (e.g., width) by pointing the laser and pressing the main button.
Measure the length of the second side (e.g., height) by pointing the laser and pressing the main button.
Kifaa kitahesabu kiotomatiki na kuonyesha eneo hilo.

3.3 Upimaji wa Kiasi

Switch to Volume Measurement mode.
Measure the length, width, and height sequentially as prompted by the device's display.
Kifaa kitahesabu kiotomatiki na kuonyesha sauti.

Illustrations of volume and angle measurement applications

Figure 5: Visual representations of volume measurement within a room and angle measurement on a staircase.

3.4 Kipimo cha Pembe

Switch to Angle Measurement mode.
Follow the on-screen prompts to measure the necessary points to determine the angle.
The calculated angle will be displayed.

3.5 Kipimo cha Pythagorean

The device supports various Pythagorean modes (e.g., single Pythagorean, double Pythagorean) to calculate indirect measurements. Refer to the on-screen icons for specific prompts for each Pythagorean function.

Chagua hali ya Pythagorean unayotaka.
Measure the required sides as indicated by the flashing segments on the display.
Kifaa kitahesabu na kuonyesha upande usiojulikana.

4. Matengenezo

4.1 Kusafisha

Futa kifaa kwa laini, damp kitambaa. Usitumie kemikali kali au visafishaji vya abrasive.
Ensure the laser lens and display are clean for optimal performance. Use a lens cleaning cloth if necessary.

4.2 Hifadhi

Hifadhi kifaa mahali pa baridi, kavu mbali na jua moja kwa moja na joto kali.
The device features an aluminum-magnesium alloy casing for durability, but it should still be protected from drops and impacts.

Close-up of the ATuMan LS-P 40m Laser Distance Meter showing its aluminum-magnesium alloy casing

Kielelezo cha 6: Maelezo ya kina view of the device's robust aluminum-magnesium alloy casing, designed for durability.

4.3 Utunzaji wa Betri

Chaji betri mara kwa mara, hata kama kifaa hakitumiki mara kwa mara, ili kudumisha afya ya betri.
Epuka kumaliza kabisa betri kabla ya kuchaji tena.
Ikiwa itahifadhiwa kwa muda mrefu, chaji betri hadi takriban 50% kabla ya kuhifadhi.

5. Utatuzi wa shida

5.1 Kifaa Hakiwashi

Ensure the battery is sufficiently charged. Connect the device to a USB charger and allow it to charge for at least 30 minutes before attempting to power on again.
Press and hold the power button for several seconds to ensure proper power-on attempt.

5.2 Inaccurate Measurements or Laser Not Visible

Ensure the laser lens is clean and free from dust or smudges.
Measurements taken in bright sunlight or on highly reflective/absorbent surfaces may be less accurate or difficult to obtain. Try to measure in shaded areas or use a target plate if available.
Verify that the measurement reference point (front or rear of the device) is correctly set for your application.

5.3 Maisha Mafupi ya Betri

Hakikisha kuwa kifaa kimechajiwa kikamilifu kabla ya kutumia.
Frequent use of the laser or backlight can consume battery faster.
Battery performance can degrade over time. If battery life significantly shortens, consider contacting customer support.

6. Vipimo

Kipengele	Maelezo
Nambari ya Mfano	LS-P 40m
Chapa	ATuMan (Manufacturer: DUKA)
Rangi	Kijivu
Nyenzo	Metal (Aluminum-magnesium alloy casing)
Aina ya Betri	Lithium Ion (1 Lithium Polymer battery included)
Vipimo kwa Kila Ada	Takriban 3500
Kazi	Distance, Area, Volume, Angle, Pythagorean (11 total functions)
Vipimo vya Kifurushi	13 x 6.9 x 2.1 cm
Uzito wa Kipengee	60 g

ATuMan LS-P 40m Laser Distance Meter being placed into a shirt pocket

Figure 7: The compact size of the LS-P 40m, demonstrating its portability as it fits into a shirt pocket.

7. Udhamini na Msaada

Specific warranty details are not provided in the product information. For warranty claims, technical support, or service inquiries, please contact the seller or manufacturer directly through their official channels. Keep your purchase receipt as proof of purchase.

	ATuMan na DUKA Product Overview - Zana na Elektroniki Gundua anuwai ya zana za teknolojia ya juu, zinazolenga muundo na za elektroniki kutoka DUKA, na zana zilizoundwa vizuri na za ubora wa juu kutoka kwa ATuMan. Inaangazia vitafuta mbalimbali vya leza, mita za halijoto na unyevunyevu, vijaribio vya soketi na zaidi.
	ATuMan LI1 Laser Angle Gauge: Operating Instructions & Technical Specifications Comprehensive operating instructions, product briefing, technical specifications, and safety guidelines for the ATuMan LI1 Laser Line Projection Angle Gauge.
	LI1 Laser Line Makadirio Angle Maelekezo ya kupima Maagizo ya kina ya Kipimo cha Pembe ya Makadirio ya Laser LI1, inayofunika maelezo ya bidhaa, madokezo muhimu, muhtasari wa bidhaa, onyesho kuu, kuanza, kuzima, kipimo cha pembe, kipimo cha pembe, uendeshaji wa leza, usakinishaji wa mabano, matumizi ya mabano, vipimo vya kiufundi na maagizo ya usalama.
	ATuMan TH1 Clock Thermohygrometer User Guide Comprehensive guide for the ATuMan TH1 Clock Thermohygrometer, detailing its features, specifications, setup, and usage for monitoring temperature and humidity in living spaces.
	HF1 Intelligent Multifunctional Formaldehyde Monitor Mwongozo wa Mtumiaji Hati hii inatoa maagizo na vipimo vya HF1 Intelligent Multifunctional Formaldehyde Monitor na Shenzhen ATuMan Precision Machinery Technology Co., Ltd. Inashughulikia vipengele vya bidhaa, uendeshaji, usalama na maelezo ya kiufundi.
	Mwongozo wa Mtumiaji wa DUKE LI1 Laser Makadirio ya Angle Gauge Mwongozo wa mtumiaji wa DUKE LI1 Laser Projection Angle Gauge, inayoelezea vipengele vyake, uendeshaji, vipimo vyake vya kiufundi, na maagizo ya usalama. Kifaa hiki cha kubebeka hutoa kipimo cha pembe ya 360° kwa matumizi mbalimbali ya ujenzi na utengenezaji.

ATuMan LS-P 40m