Mwongozo wa Mtumiaji wa Printa ya Artillery Hornet 3D

1. Utangulizi

Welcome to the Artillery Hornet 3D Printer User Manual. This guide provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your new 3D printer. The Artillery Hornet is designed for ease of use and high-quality printing, featuring a highly pre-assembled structure and advanced components for reliable performance.

2. Taarifa za Usalama

• Daima tumia kichapishi katika eneo lenye hewa ya kutosha.
• Weka mikono wazi ya sehemu zinazohamia wakati wa operesheni.
• Do not touch the hotend or heated bed during or immediately after printing, as they can reach high temperatures.
• Hakikisha usambazaji wa umeme umeunganishwa vizuri na kutuliza.
• Unplug the printer from the power source before performing any maintenance or cleaning.
• Weka printa mbali na vifaa vinavyoweza kuwaka na jua moja kwa moja.
• Supervise children and pets when the printer is in operation.

3. Yaliyomo kwenye Kifurushi

Baada ya kuondoa sanduku, tafadhali thibitisha kuwa vipengele vyote vipo:

• Artillery Hornet 3D Printer (95% pre-assembled)
• Filament Spool Holder
• Cable ya Nguvu
• Kebo ya USB
• Tool Kit (wrenches, screwdrivers, etc.)
• SD Card with Test Files and Software
• Mwongozo wa Mtumiaji (hati hii)
• Sampna Filament

4. Bidhaa Imeishaview

The Artillery Hornet features a robust metal integrated structure and a sleek design. Key components include:

Kielelezo 4.1: Kwa ujumla view of the Artillery Hornet 3D Printer.

Figure 4.2: Close-up of the innovative integrated cabling system, designed to prevent cable dangling and ensure a neat setup.

Figure 4.3: Details of the New Titan Extruder and Modular Hotend, crucial for stable and precise filament feeding and melting.

Figure 4.4: The self-developed 32-bit motherboard with replaceable drivers, enabling ultra-silent printing and enhanced performance.

Figure 4.5: The user-friendly one-key knob integrated switch for easy operation and the adjustable filament holder designed to maintain a low center of gravity.

5. Mwongozo wa Kuweka

The Artillery Hornet is designed for quick and easy assembly, being 95% pre-assembled. Follow these steps to complete the setup:

Figure 5.1: The printer arrives 95% pre-assembled, requiring only a few minutes for final setup.

1. Kufungua: Ondoa kwa uangalifu vifaa vyote kutoka kwa kifurushi.
2. Attach Gantry: Secure the pre-assembled gantry to the base unit using the provided screws. The integrated cabling simplifies this connection.
3. Install Filament Holder: Mount the adjustable filament holder to the designated slot on the side of the printer.
4. Unganisha Nguvu: Plug the power cable into the printer and then into a grounded electrical outlet.
5. Washa: Flip the power switch located at the rear of the base unit.
6. Kusawazisha Kitanda: Perform manual bed leveling as instructed on the printer's display or in the detailed guide on the included SD card. Proper bed leveling is crucial for successful prints.

6. Maagizo ya Uendeshaji

Operating the Artillery Hornet is intuitive, thanks to its one-key knob integrated switch and efficient design.

6.1. Upakiaji wa Filamenti

1. Place your filament spool onto the adjustable filament holder.
2. Feed the filament through the filament sensor and into the Titan Extruder.
3. Heat the hotend to the appropriate temperature for your filament type (e.g., 200°C for PLA).
4. Use the one-key knob to select the 'Load Filament' option. The extruder will automatically pull the filament through the hotend until it extrudes smoothly.

6.2. Kuanzisha Uchapishaji

1. Tayarisha modeli yako ya 3D kwa kutumia programu ya kukata vipande (km, Cura, PrusaSlicer) na uihifadhi kama msimbo wa G file kwa kadi ya SD.
2. Ingiza kadi ya SD kwenye nafasi ya kadi ya SD ya kichapishi.
3. Navigate the menu using the one-key knob to 'Print from SD' and select your desired G-code file.
4. The printer will automatically heat up the bed and hotend, then begin printing. The self-developed 32-bit motherboard ensures ultra-silent operation during printing.

7. Matengenezo

Regular maintenance ensures optimal performance and longevity of your Artillery Hornet 3D Printer.

• Safisha Kitanda cha Kuchapisha: After each print, clean the print bed with isopropyl alcohol to ensure good adhesion for future prints.
• Kusafisha Nozzle: Periodically clean the nozzle to prevent clogs. Use a brass brush or needle to clear any residue.
• Paka mafuta Fimbo ya mhimili wa Z: Apply a small amount of lithium grease or similar lubricant to the Z-axis lead screw every few months to ensure smooth vertical movement.
• Mikanda ya Kuangalia: Inspect the X and Y axis belts for proper tension and wear. Adjust if too loose or replace if damaged.
• Kusafisha Mashabiki: Ensure cooling fans (for hotend, part cooling, and power supply) are free from dust and debris to prevent overheating.

8. Utatuzi wa shida

Hapa kuna maswala kadhaa ya kawaida na suluhisho zao zinazowezekana:

9. Vipimo

Figure 9.1: Dimensions of the Artillery Hornet 3D Printer.

10. Udhamini na Msaada

For warranty information and technical support, please refer to the documentation included with your product or visit the official Artillery webtovuti. Weka risiti yako ya ununuzi kama dhibitisho la ununuzi kwa madai yoyote ya udhamini.