Utangulizi
This manual provides comprehensive instructions for the KeylessOption Keyless Entry Remote Starter Car Key Fob. This remote is designed as a replacement for aftermarket Viper alarm and remote start systems. Ensure your original remote's FCC ID matches EZSDEI7141 for compatibility.

Picha: Mbele view of the KeylessOption Key Fob, displaying the lock, unlock, AUX, and star buttons.
Kuanzisha na Kupanga
Programming this remote requires locating the Viper system's control button, often found near the rearview mirror, under the dashboard, or in other discreet locations depending on the installation. Refer to your vehicle's specific Viper system manual or consult a professional if you cannot locate it.
Hatua za Kuandaa:
- Open the driver's side door of your vehicle.
- Insert the key into the ignition and turn it to the ON position. Do not start the engine.
- Locate the Viper system's control button (often a small button with a blue LED indicator).
- Bonyeza kitufe cha kudhibiti mara saba. Juu ya eighth press, hold the button down until the car chirps.
- While still holding the control button, press the Funga button on your new KeylessOption remote. The car should chirp again to confirm successful programming.
- Toa kitufe cha kudhibiti.
- Washa kitufe cha kuwasha hadi IMEZIMWA msimamo na uiondoe.
- Close the driver's side door.
- Test the remote's functions (Lock, Unlock, etc.) to ensure proper operation.
If you are programming multiple remotes, repeat steps 4 and 5 for each additional remote before turning the key off in step 6.
Video: Muhtasari mfupiview of KeylessOption Key Fob Remotes for Viper systems.
Maagizo ya Uendeshaji
Once programmed, your KeylessOption remote provides convenient control over your vehicle's aftermarket alarm and remote start system. The remote features four distinct buttons:
- Kitufe cha Kufunga: Press to lock your vehicle's doors and arm the alarm system.
- Kitufe cha Kufungua: Press to unlock your vehicle's doors and disarm the alarm system.
- Kitufe cha AUX: This button typically controls auxiliary functions, such as opening the trunk or activating a remote start feature, depending on your Viper system's configuration. Refer to your Viper system's manual for specific AUX button functionality.
- Panic Button (*): Press and hold this button to activate the vehicle's panic alarm. Press again to deactivate.

Picha: Mwenye pembe view of the KeylessOption Key Fob, highlighting its ergonomic design.
Matengenezo
Ubadilishaji wa Betri:
If your remote's range decreases or it stops responding, the battery may need replacement. The KeylessOption remote uses a standard coin cell battery (e.g., CR2032, check inside the remote for exact type). To replace:
- Carefully separate the two halves of the remote casing using a small flat-head screwdriver or a prying tool.
- Remove the old battery. Note its orientation (+/- sides).
- Insert the new battery with the correct orientation.
- Snap the remote casing kurudi pamoja salama.

Picha: Nyuma view of the KeylessOption Key Fob, indicating where the casing can be opened for battery access.
Kutatua matatizo
- Kidhibiti cha mbali hakijibu: Ensure the battery is fresh and correctly installed. Re-attempt the programming steps carefully. Verify the FCC ID on your original remote matches EZSDEI7141.
- Masafa machache: Replace the battery. Ensure there are no obstructions between the remote and the vehicle's antenna.
- Vehicle not chirping during programming: Double-check that the ignition is in the ON position (not ACC or START). Confirm you are pressing the Viper control button the correct number of times and holding it on the last press until a chirp is heard.
Vipimo
| Chapa | Chaguo la Keyless |
| Nambari ya Mfano | EZSDEI7141 474V |
| Vifaa Sambamba | Viper Aftermarket Alarm System |
| Kitambulisho cha FCC | EZSDEI7141 |
| Idadi ya Vifungo | 4 (Lock, Unlock, Aux, Panic) |
| Uzito wa Kipengee | 0.634 wakia |
| Vipimo vya Kifurushi | Inchi 6.77 x 4.65 x 0.47 |
Udhamini na Msaada
Each KeylessOption remote includes a warranty card. KeylessOption is an automotive remote company dedicated to providing reliable replacement automotive products. For further assistance or warranty claims, please refer to the contact information provided on your warranty card or visit the official KeylessOption webtovuti.

Image: KeylessOption Warranty Card, included with each purchase.

