Mwongozo wa Mtumiaji wa Kidhibiti cha AtlasIED E408-250 Kilichowekwa kwenye Bamba la 250W

1. Bidhaa Imeishaview

The AtlasIED E408-250 is a plate-mounted attenuator specifically designed for precise level control in masking and sound reinforcement systems. It features a 10-position, non-shorting rotary switch that allows for fine-tuning of audio levels. Each step of the rotary switch provides an attenuation rate of 1.5 dB, offering granular control over the sound output.

Mbele view of the AtlasIED E408-250 attenuator with a black rotary knob and numbered dial from 0 to 10 on a brushed metal plate.

Kielelezo 1: Mbele view of the AtlasIED E408-250 attenuator, showing the rotary knob and numbered dial on a brushed metal plate.

2. Kuweka na Kuweka

Proper installation is crucial for the optimal performance of the E408-250 attenuator. This device is designed for plate mounting, typically into a standard electrical box or similar enclosure.

2.1 Kuweka

Ensure the mounting surface is flat and secure.
Align the attenuator plate with the mounting holes of the electrical box or bracket.
Secure the plate using appropriate screws (not included). Do not overtighten.

2.2 Viunganisho vya Wiring

The E408-250 attenuator requires connection to your sound system's speaker lines. Refer to the wiring diagram below and on the unit itself for correct polarity and connection points. It is recommended to consult a qualified audio technician for installation if you are unfamiliar with audio wiring.

Nyuma view of the AtlasIED E408-250 attenuator showing the yellow transformer and green terminal block for wiring connections.

Kielelezo cha 2: Nyuma view of the attenuator, illustrating the transformer and the green terminal block where speaker wires are connected.

The attenuator typically connects in series with the speaker line. Ensure power to the amplifier is off before making any connections to prevent damage to the equipment or injury.

3. Maagizo ya Uendeshaji

The AtlasIED E408-250 features a simple rotary knob for adjusting the audio level. The knob has 10 distinct positions, labeled from 0 to 10, providing precise control over the attenuation.

Adjusting Level: Rotate the knob clockwise to increase the sound level (less attenuation) and counter-clockwise to decrease the sound level (more attenuation).
Attenuation Rate: Each step of the rotary switch provides an attenuation of 1.5 dB. This allows for fine adjustments to achieve the desired sound level in your environment.
Non-Shorting Design: The switch is designed to be non-shorting, meaning it will not create a short circuit when transitioning between positions.
No Stop: The rotary switch does not have a physical stop at position 0 or 10, allowing for continuous rotation. However, the attenuation range is defined by the 0-10 scale.

Mwenye pembe view of the AtlasIED E408-250 attenuator, showing the rotary knob and the metal plate, with a separate small black plate with numbers 0-10.

Kielelezo 3: Pembe view of the attenuator, highlighting the rotary knob and the numbered faceplate for level adjustment.

4. Matengenezo

The AtlasIED E408-250 attenuator is designed for long-term, reliable operation with minimal maintenance. Follow these guidelines to ensure its longevity:

Kusafisha: Use a soft, dry cloth to wipe the surface of the attenuator plate. Avoid abrasive cleaners, solvents, or excessive moisture, which can damage the finish or internal components.
Ukaguzi: Kagua miunganisho ya nyaya mara kwa mara ili kuhakikisha kuwa iko salama na haina kutu.
Mazingira: Ensure the attenuator is installed in a dry environment, away from direct sunlight, extreme temperatures, and high humidity.

5. Utatuzi wa shida

If you experience issues with your AtlasIED E408-250 attenuator, consider the following common troubleshooting steps:

Hakuna Sauti au Sauti ya Chini:
- Check all wiring connections to ensure they are secure and correctly terminated.
- Verify that the attenuator knob is not set to '0' (maximum attenuation).
- Hakikisha amplifier connected to the attenuator is powered on and functioning correctly.
- Confirm that the speakers are properly connected and operational.
Sauti ya Muda:
- Kagua nyaya za nyaya kwa miunganisho iliyolegea au insulation iliyoharibika.
- Ensure the attenuator knob is clean and free of debris that might interfere with its contact points.
Sauti Iliyopotoka:
- Verify that the attenuator is rated for the power output of your amplifier (E408-250 is 250W). Overpowering can cause distortion or damage.
- Check other components in the audio chain (amplifier, speakers) for issues.

If the problem persists after attempting these steps, contact Atlas Sound customer support or a qualified audio technician.

6. Vipimo

Kipengele	Maelezo
Mfano	E408-250
Aina	Plate Mounted Attenuator
Ukadiriaji wa Nguvu	250W
Attenuation Steps	10-position, non-shorting rotary switch
Attenuation Rate per Step	1.5 dB
Uzito wa Kipengee	Pauni 1.75 (kilo 0.79)
Vipimo vya Bidhaa	Inchi 5.05 x 5 x 4.1 (sentimita 12.83 x 12.7 x 10.41)
ASIN	B07WS6RGCQ
Tarehe ya Kwanza Inapatikana	Aprili 9, 2019

7. Udhamini na Msaada

For specific warranty information regarding your AtlasIED E408-250 attenuator, please refer to the documentation provided with your purchase or visit the official Atlas Sound webtovuti. Sheria na masharti ya udhamini yanaweza kutofautiana.

For technical support, product inquiries, or service, please contact Atlas Sound directly:

Mtengenezaji: Sauti ya Atlasi
Webtovuti: www.atlassound.com (Kumbuka: Huyu ni mhudumu wa zamani wa kawaidaample link, please verify the actual support URL.)
Maelezo ya Mawasiliano: Rejelea mtengenezaji website for the most current contact details, including phone numbers and email addresses for customer service.

	Mwongozo wa Usakinishaji wa Kidhibiti Sauti cha Atlas Mwongozo kamili wa kusakinisha vidhibiti vya Atlas Sound, vinavyofunika nyaya, michoro, ubadilishaji wa umeme, uwekaji wa rafu, na vipimo vya vipimo kwa modeli za AT10, AT35, na AT100.
	Maagizo ya Ufungaji wa Kidhibiti cha Sauti cha Atlas Mwongozo kamili wa usakinishaji wa vidhibiti vya Atlas Sound AT10, AT35, na AT100, vinavyofunika nyaya, chaguo za paneli za uso, uwekaji wa rafu, na vipimo vya vipimo.
	Mwongozo wa Mtumiaji wa Zana ya Mabadiliko ya Haraka ya VEVOR - Mwongozo wa Mfano na Vipimo Mwongozo kamili wa mtumiaji wa Seti za Machapisho za VEVOR Quick Change Tool, vipengele vya maelezo, aina ya pistoni, aina ya kabari, na vipimo vya nyongeza. Hushughulikia modeli kama 250-100, 250-200, na zaidi.
	Mwongozo wa Maombi ya Rostra Driving Innovations 2010 Gundua katalogi ya Ubunifu wa Kuendesha Uendeshaji wa Rostra ya 2010 ya Vidhibiti vya Usahihi vya Rostra, inayoangazia anuwai ya vifaa vya magari ikiwa ni pamoja na kamera mbadala, vifaa vya kuegesha, mifumo ya starehe za viti, na vifaa vya kudhibiti safari za magari kwa miundo na miundo mbalimbali ya magari.
	Maelekezo ya Ufungaji wa Vifaa vya Mlango wa NGP SLAL-250 Mwongozo wa kina wa usakinishaji wa maunzi ya milango ya kuteleza ya NGP SLAL-250, miundo ya kufunika SLAL-250-BP, SLAL-250-PD, na SLAL-250-SW. Inajumuisha ukubwa, mkusanyiko wa hatua kwa hatua, na vipengele vya hiari.
	Mwongozo wa Ufungaji wa Kisambazaji cha Kisambazaji cha Kielektroniki cha Sloan Comprehensive installation instructions for Sloan's ESD-200, ESD-250, ESD-300, and ESD-350 sensor-activated electronic soap dispensers, covering mounting, operation, and troubleshooting.

Atlas Sound E408-250