APIELE 10 Amp Mwongozo wa Mtumiaji wa Kubadilisha Kitufe cha Kubonyeza cha 19mm

Utangulizi

This user manual provides detailed instructions for the installation, operation, and maintenance of the APIELE 10 Amp 19mm Latching Push Button Switch. This high-quality metal switch is designed for various applications, including automotive, motorcycle modification, and control equipment.

Taarifa za Usalama

• Ensure power is disconnected before installation or maintenance to prevent electrical shock.
• Thibitisha juztage and current ratings match your application to avoid damage to the switch or connected devices.
• Do not exceed the specified 10 Amp current rating or 12V operating voltage.
• Handle with care to avoid damaging internal components.
• If you are unsure about any installation steps, consult a qualified electrician.

Bidhaa Imeishaview

The APIELE 10 Amp 19mm Latching Push Button Switch features a durable metal construction and an integrated LED ring. It is designed for reliable performance in various environments.

Sifa Muhimu:

• Latching Operation: Push once for ON, push again for OFF.
• Ukadiriaji wa Juu wa Sasa: 10 Amps.
• Mwangaza wa LED: 12V LED ring for status indication.
• Ujenzi wa kudumu: High-quality metal material.
• IP65 isiyozuia maji: Suitable for wet or dusty environments.
• Muda mrefu wa Maisha: Electrical life of 200,000 times, mechanical life of 1,000,000 cycles.

Vipengele:

The product includes the push button switch and a connector for wiring.

• 1 x Latching Push Button Switch
• 1 x Connector with pre-attached wires

Figure 1: APIELE 10 Amp 19mm Latching Push Button Switch (Red LED, Silver Stainless Steel).

Figure 2: Various angles of the APIELE push button switch, showcasinmuundo wake imara.

Figure 3: Comparison highlighting the larger press part and stronger contact terminals of the new design (right) compared to the old design (left).

Figure 4: Illustration of the switch's durability, rated for 200,000 press times and 40,000 hours of lamp maisha.

Figure 5: Visual representation of the IP65 waterproof protection, indicating suitability for wet or dusty environments.

Vipimo

Figure 6: Detailed technical specifications and dimensions of the switch.

Kuweka na Kuweka

Follow these steps for proper installation of your APIELE Latching Push Button Switch.

Mchoro wa Wiring:

The switch comes with a pre-wired connector for ease of installation. Refer to the diagram below for pin assignments:

• Waya Nyekundu: Positive LED Pin "+"
• Waya Nyeusi: Negative LED Pin "-"
• Waya wa Bluu: Normal Open Pin

Figure 7: Wiring diagram showing the function of each colored wire on the connector.

Hatua za Ufungaji:

1. Andaa Shimo la Kupachika: Drill a 19mm (3/4 inch) diameter hole in the desired mounting surface.
2. Insert Switch: Insert the switch body into the prepared hole from the front.
3. Salama kwa kutumia Nut: Thread the securing nut onto the switch body from the back and tighten it to hold the switch firmly in place.
4. Unganisha Wiring: Attach the provided connector to the switch terminals. Ensure correct polarity for the LED function.

Figure 8: Visual guide for the installation process of the push button switch.

Maagizo ya Uendeshaji

The APIELE Latching Push Button Switch operates with a simple ON-OFF mechanism.

• To turn on the connected device, press the button once. The LED ring will illuminate, indicating the switch is in the ON state.
• To turn off the connected device, press the button again. The LED ring will turn off, indicating the switch is in the OFF state.

Maombi:

This versatile switch is suitable for a wide range of applications, including but not limited to:

• Automobile and motorcycle modifications
• Control equipment switch modifications
• Vifungo vya kengele ya mlango
• SOS buttons
• Elevator buttons
• Vifaa vya kaya

Kielelezo 9: Kutamples of common applications for the APIELE push button switch, including doorbell, car, and elevator buttons.

Matengenezo

The APIELE Latching Push Button Switch is designed for minimal maintenance due to its durable construction and IP65 waterproof rating.

• Kusafisha: Wipe the switch surface with a soft, damp kitambaa. Epuka kutumia visafishaji au miyeyusho inayoweza kuharibu umaliziaji au vipengele vya ndani.
• Ukaguzi: Periodically check the wiring connections to ensure they are secure and free from corrosion.
• Ulinzi wa Mazingira: While waterproof, prolonged submersion is not recommended. Ensure the mounting area is properly sealed if exposed to extreme moisture.

Kutatua matatizo

Udhamini na Msaada

APIELE products are manufactured to high standards. For any issues or support inquiries, please contact APIELE Electric directly through their official channels or the retailer from whom the product was purchased.

Tembelea APIELE Store on Amazon kwa habari zaidi na chaguzi za mawasiliano.