1. Utangulizi
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the MEAN WELL LPV-100-12 LED Driver. This unit is a constant voltage, single output, waterproof power supply designed for LED-related fixtures and appliances. It features a universal AC input and is fully encapsulated with an IP67 rating, making it suitable for various environments.
2. Maagizo ya Usalama
Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Wafanyakazi Waliohitimu: Ufungaji na huduma lazima zifanywe na wafanyakazi waliohitimu pekee.
- Kukatwa kwa Nguvu: Daima ondoa umeme kabla ya usakinishaji, matengenezo, au utatuzi wa matatizo.
- Wiring sahihi: Ensure all wiring connections are secure and comply with local electrical codes. Incorrect wiring can cause damage or fire.
- Uingizaji hewa: Although IP67 rated, ensure adequate air circulation around the unit to prevent excessive heat buildup, especially when operating at maximum load.
- Utangamano wa Mzigo: Do not exceed the specified output wattage or current. Overloading can damage the driver and connected devices.
- Masharti ya Mazingira: The IP67 rating indicates suitability for dry and damp locations. Avoid submerging the unit or exposing it to extreme temperatures outside its specified operating range.
3. Bidhaa Imeishaview
The LPV-100-12 is a robust LED driver designed for reliable performance in demanding conditions. Its compact form factor and waterproof design make it versatile for various applications.

Kielelezo cha 3.1: Kwa ujumla view of the MEAN WELL LPV-100-12 LED Driver. This image displays the white rectangular housing with input (AC) and output (DC) wires, along with the product label.

Kielelezo cha 3.2: Close-up of the product label on the LPV-100-12. The label details input voltage (100-240V~, 2.2A, 50/60Hz), output voltage (+12V === 8.5A), and various certifications including CE, cURus, and IP67.

Kielelezo cha 3.3: Product label with the serial number highlighted. The serial number for this unit is GB95522023. This serial number can be used to obtain the Quality Control Inspection Report from MEAN WELL.
4. Kuweka na Kuweka
Follow these steps for proper installation of the LPV-100-12 LED Driver.
- Kupachika: The unit is designed for wall mount installation. Secure the driver to a stable surface using appropriate fasteners. Ensure the mounting location allows for adequate heat dissipation.
- Waya za Kuingiza (AC):
- Unganisha Brown (ACL) wire to the Live (L) AC input.
- Unganisha Blue (ACN) wire to the Neutral (N) AC input.
- Vol. Pembejeotage range is 90 ~ 264VAC or 127 ~ 370VDC. Ensure your power source is within this range.
- Waya za Kutoa (DC):
- Unganisha Nyekundu (V+) wire to the positive (+) terminal of your 12VDC LED fixture.
- Unganisha Nyeusi (V-) wire to the negative (-) terminal of your 12VDC LED fixture.
- Ensure the total power consumption of the connected LED fixtures does not exceed 102 Watts (8.5 Amps at 12VDC).
- Uhamishaji joto: After making all connections, ensure all exposed wires are properly insulated to prevent short circuits.
- Washa: Once all connections are secure and verified, apply power to the AC input.
5. Maagizo ya Uendeshaji
The MEAN WELL LPV-100-12 is a constant voltage LED driver. Once properly installed and powered, it will provide a stable 12VDC output to the connected LED load.
- Uendeshaji Otomatiki: The driver operates automatically when power is supplied. There are no user-adjustable controls.
- Ufuatiliaji wa Mzigo: Ensure the connected LED load remains within the driver's specified output limits (12VDC, 8.5A, 102W).
- Vipengele vya Ulinzi: The unit includes built-in protections against short circuit, overload, and over voltage. In case of a fault, the driver may temporarily shut down to protect itself and the connected load. Remove the fault condition and cycle power to reset.
6. Matengenezo
The LPV-100-12 LED Driver is designed for minimal maintenance due to its fully encapsulated, waterproof construction.
- Ukaguzi wa Mara kwa Mara: Periodically inspect the driver and its wiring for any signs of damage, wear, or loose connections.
- Kusafisha: Ikiwa ni lazima, safisha kwa upole sehemu ya nje ya kitengo na laini, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the unit is powered off before cleaning.
- Ukaguzi wa Mazingira: Verify that the operating environment remains within the specified temperature range (-25~70℃) and that the IP67 rating is not compromised by physical damage.
7. Utatuzi wa shida
If you encounter issues with your LPV-100-12 LED Driver, refer to the following troubleshooting guide:
| Tatizo | Sababu inayowezekana | Suluhisho |
|---|---|---|
| No output from driver / LEDs not lighting up |
|
|
| LEDs kumeta au kufifia |
|
|
| Dereva ni moto kwa kugusa |
|
|
8. Vipimo
Detailed technical specifications for the MEAN WELL LPV-100-12 LED Driver:
| Kipengele | Vipimo |
|---|---|
| Nambari ya Mfano | LPV-100-12 |
| Uingizaji Voltage | 90 ~ 264VAC or 127 ~ 370VDC |
| Masafa ya Kuingiza | 47 ~ 63Hz |
| Ingiza ya Sasa | 2.2A/115VAC, 1.2A/230VAC |
| Pato Voltage | 12VDC |
| Pato la Sasa | 8.5 Amps |
| Pato Wattage | 102 Watts |
| Ufanisi | Not specified in provided data, typical for constant voltage madereva. |
| Ulinzi | Short Circuit, Overload, Over Voltage |
| Joto la Uendeshaji | -25 ~ 70℃ |
| Ukadiriaji wa Ulinzi wa Ingress (IP). | IP67 (Fully encapsulated, suitable for dry and damp maeneo) |
| Vipimo (L x W x H) | Inchi 7.48 x 2.05 x 1.46 (190 x 52 x 37 mm) |
| Uzito wa Kipengee | Wakia 0.16 (takriban g 4.54) |
| Aina ya Kuweka | Mlima wa Ukuta |
| UPC | 645312123049 |
9. Udhamini na Msaada
Kwa taarifa za udhamini na usaidizi wa kiufundi, tafadhali rejelea MEAN WELL rasmi website or contact your authorized distributor. Keep your purchase receipt and the product's serial number (e.g., GB95522023) for any warranty claims or support inquiries.





