1. Bidhaa Imeishaview
The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.
- Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
- Mechanical Brake: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
- Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
- Injini ya Uwezo wa Juu: Designed for high load capacity and efficiency, delivering strong power output.
- Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
- Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
- Muundo wa Ergonomic: Compact and ergonomic form for comfortable handling.
- Tool-Free Guard Adjustment: The protective guard can be adjusted without the need for additional tools.
- SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.
2. Maagizo ya Usalama
Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.
Usalama wa Jumla
- Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, gloves, and a dust mask.
- Hakikisha sehemu ya kazi iko salamaampkabla ya operesheni.
- Keep hands clear of rotating parts and the cutting/grinding area.
- Usitumie zana katika angahewa zinazolipuka, kama vile maji yanayoweza kuwaka, gesi au vumbi.
- Weka watoto na watazamaji mbali wakati wa kutumia zana ya nguvu.
Usalama wa Umeme
- Hakikisha ugavi wa umeme ujazotage matches the rating on the tool's nameplate.
- Usitumie vibaya kamba. Kamwe usitumie waya kubeba, kuvuta au kuchomoa zana ya umeme. Weka kamba mbali na joto, mafuta, kingo kali, au sehemu zinazosonga.
- Ikiwa unatumia zana ya nguvu kwenye tangazoamp eneo haliepukiki, tumia kifaa kilichosalia cha sasa (RCD) kilicholindwa.
Usalama Maalum wa Kisagia cha Angle
- Always use the protective guard. Ensure it is correctly positioned and securely fastened.
- Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
- Never use cutting discs for side grinding.
- Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
- Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.
3. Vipengele na vipengele
Vipengele Muhimu:
- Mwili Mkuu: Houses the motor, electronics, and gearbox.
- Mlinzi wa Kinga: Adjustable, tool-free guard for user protection.
- SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
- Kitufe cha Kufunga Spindle: For easy disc changes.
- Badili ya Slaidi: Lockable for continuous operation.
- Speed Selection Dial: For variable speed control (see Figure 2).
- Matundu ya hewa: For motor cooling and dust expulsion.
4. Kuweka
Attaching the SoftVib Handle
The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.
Mounting the Protective Guard
The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.
Installing the Grinding/Cutting Disc
- Unplug the tool from the power supply.
- Bonyeza na ushikilie kitufe cha kufunga spindle.
- Weka cl ya ndaniamping flange kwenye spindle.
- Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
- Parafujo kwenye clamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
- Toa kitufe cha kufuli cha spindle.
5. Maagizo ya Uendeshaji
Kuwasha/Kuzima
- To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- To switch off, release the slide switch. If locked, press the rear part of the switch to release it.
Udhibiti wa Kasi unaobadilika
The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.
Using the Mechanical Brake
The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.
Working with the Grinder
- Shikilia kinu kwa nguvu kila wakati kwa mikono yote miwili.
- Allow the tool to reach full operating speed before contacting the workpiece.
- Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
- For cutting, use a slight rocking motion to prevent the disc from binding.
- Be mindful of sparks and debris. Direct them away from yourself and others.
6. Matengenezo
Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.
Kusafisha
- Daima ondoa chombo kabla ya kusafisha.
- Regularly clean the ventilation slots to prevent dust buildup, which can lead to overheating. Use compressed air if available.
- Futa sehemu ya nje ya chombo na tangazoamp kitambaa. Usitumie kemikali kali au visafishaji vya abrasive.
Brashi ya kaboni
The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.
Hifadhi
Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.
7. Utatuzi wa shida
| Tatizo | Sababu inayowezekana | Suluhisho |
|---|---|---|
| Chombo hakianza | Hakuna usambazaji wa umeme Restart interlock activated (after power failure) Kamba ya umeme iliyoharibiwa | Angalia muunganisho wa nguvu Unplug and re-plug the tool Inspect cord for damage; replace if necessary (by qualified personnel) |
| Chombo huacha wakati wa operesheni | Ulinzi wa upakiaji umewashwa Disc jammed (anti-kickback activated) | Punguza shinikizo; ruhusu kifaa kipoe Release switch, clear obstruction, then restart |
| Mtetemo mwingi | Worn or damaged disc Diski iliyowekwa vibaya Hushughulikia huru | Badilisha diski Re-mount disc correctly, ensure clamping nut is tight Tighten SoftVib handle |
| Reduced performance / Excessive sparking | Brashi za kaboni zilizovaliwa Dust buildup in vents | Have brushes inspected/replaced by service center Clean air vents thoroughly |
8. Vipimo
| Tabia | Thamani |
|---|---|
| Nambari ya Mfano | 447668 |
| Ingizo la Nguvu | 1700 W |
| Pato la Nguvu | 1050 W |
| Voltage | 230 V |
| Mzunguko | 50/60 Hz |
| Max. Kipenyo cha Diski | 125 mm |
| Kasi isiyo na mzigo | 2800-11500 rpm |
| Tool Holder (Angle Grinder) | M14 |
| Urefu wa Cable | 4 m |
| Vipimo (L x W x H) | 340 x 77 x 105 mm |
| Uzito | 2.6 kg |
| Rangi | Red, Black, Silver |
| Nyenzo | Chuma |
9. Udhamini na Msaada
Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.
Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex webtovuti au kwenye ufungaji wa bidhaa yako.
