Mwongozo wa Mtumiaji wa Mashine ya Ukungu Mzito ya BeamZ LF1500

1. Utangulizi

Asante kwa ununuziasing the BeamZ LF1500 Professional Heavy Fog Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before first use and keep it for future reference.

Bidhaa Imeishaview

The BeamZ LF1500 is a professional heavy fog machine designed to produce ground-hugging fog effects without the need for dry ice. It utilizes advanced ultrasonic technology to create a dense, low-lying fog using standard fog fluid and water. Its robust flight case with wheels ensures easy transport and protection, making it ideal for various events and professional applications.

BeamZ LF1500 Heavy Fog Machine with hose

Figure 1: BeamZ LF1500 Heavy Fog Machine with its flexible fog output hose and nozzle.

2. Maagizo ya Usalama

Daima zingatia tahadhari zifuatazo za usalama ili kuzuia mshtuko wa umeme, moto au majeraha:

Ensure the unit is connected to a grounded power outlet (230Vac / 50Hz).
Usitumie mashine ikiwa kamba ya nguvu imeharibiwa.
Weka mashine mbali na vifaa vinavyoweza kuwaka.
Use only BeamZ approved fog fluid and demineralized water.
Usiguse sehemu zenye joto wakati wa operesheni au mara baada ya operesheni.
Hakikisha kuna uingizaji hewa wa kutosha kuzunguka mashine.
Usitumbukize kitengo ndani ya maji au vimiminika vingine.
Weka mbali na watoto.
Ondoa umeme kabla ya kusafisha au kuhudumia.

3. Kuweka

Kufungua: Ondoa mashine kwa uangalifu kutoka kwenye kifungashio chake. Kagua uharibifu wowote wakati wa usafirishaji.
Uwekaji: Place the machine on a stable, level surface. Ensure there is sufficient space around the unit for ventilation.
Kujaza Maji:
- Open the fluid reservoir cap.
- Fill the 5-liter reservoir with a mixture of BeamZ standard fog fluid and demineralized water. Refer to the fog fluid instructions for recommended ratios.
- Securely close the reservoir cap.
Uunganisho wa Hose: Attach the flexible fog output hose to the designated port on the machine. Ensure it is securely fastened to prevent leaks.
Muunganisho wa Nishati: Connect the power cable to a suitable 230Vac / 50Hz grounded power outlet.

4. Maagizo ya Uendeshaji

Initial Power-On and Warm-up

Once connected to power, the machine will automatically begin its warm-up cycle. The warm-up time is approximately 8 minutes. The display will indicate when the machine is ready for operation.

Njia za Kudhibiti

The BeamZ LF1500 can be controlled via DMX or manually.

Uendeshaji wa Mwongozo

Use the integrated digital display and control buttons to adjust settings directly on the unit. You can control:

Pato la Ukungu: Adjust the intensity of the fog production.
Kasi ya shabiki: Control the speed of the internal fan, which affects the spread and density of the fog.
Continuous Fog: The machine supports continuous fog output once warmed up.

Operesheni ya DMX

For advanced control and integration into lighting setups, connect a DMX controller to the 3-pin XLR DMX input/output ports. The machine supports 1 or 2 DMX channels. Refer to the DMX chart below for channel assignments and values.

Chati ya Kituo cha DMX
Kituo	Kazi	Kiwango cha Thamani	Maelezo
1	Pato la ukungu	0-255	0 = Off, 1-255 = Fog output intensity (0-100%)
2	Kasi ya shabiki	0-255	0 = Off, 1-255 = Fan speed (0-100%)

5. Matengenezo

Regular maintenance ensures the longevity and optimal performance of your BeamZ LF1500.

Ubadilishaji wa Maji: Always use fresh, clean fog fluid and demineralized water. Do not mix different types of fluid.
Kusafisha:
- Periodically clean the exterior of the machine with a soft, dry cloth.
- Ensure the air vents are free from dust and debris to prevent overheating.
- If the machine is stored for extended periods, it is recommended to run a cleaning solution (distilled water) through the system to prevent clogs.
Hifadhi: Store the machine in a cool, dry place. If storing for a long time, empty the fluid reservoir.

6. Utatuzi wa shida

Mwongozo wa matatizo
Tatizo	Sababu inayowezekana	Suluhisho
Hakuna pato la ukungu	Not warmed up Hifadhi ya maji tupu Pump/nozzle clogged Suala la nguvu	Wait for warm-up indicator Refill fluid reservoir Perform cleaning cycle or contact service Angalia uunganisho wa nguvu na fuse
Weak fog output	Kiwango cha chini cha maji Incorrect fluid type Partial clog Mpangilio wa kasi ya chini ya shabiki	Jaza tena maji Use recommended BeamZ fluid Perform cleaning cycle Increase fan speed via manual or DMX control
Mashine haiwashi	Hakuna nguvu ya kutoa Cable ya umeme iliyoharibika Fuse ya ndani iliyopulizwa	Angalia chanzo cha nguvu Badilisha kebo ya umeme Contact qualified technician for fuse replacement

If problems persist after attempting these solutions, please contact BeamZ customer support or a qualified service technician.

7. Vipimo

Kipengele	Vipimo
Nambari ya Mfano	LF1500 (160.748)
Ugavi wa Nguvu	230Vac / 50Hz
Wakati wa joto	Takriban. Dakika 8
Uwezo wa tank ya maji	5 lita
Njia za Kudhibiti	DMX, Mwongozo
Njia za DMX	1 au 2
Uunganisho wa DMX	Pini 3 XLR
Vipimo (L x W x H)	630 x 350 x 480 mm
Uzito	25.6 kg
Teknolojia	Ultrasonic (no dry ice required)
Pato la Kuendelea	Ndiyo

8. Udhamini na Msaada

Information regarding warranty coverage and customer support for the BeamZ LF1500 is typically provided with your purchase documentation or can be found on the official BeamZ webtovuti. Tafadhali hifadhi uthibitisho wako wa ununuzi kwa madai yoyote ya udhamini.

For technical assistance, spare parts, or service inquiries, please contact your local BeamZ distributor or visit the official BeamZ webtovuti kwa maelezo ya mawasiliano.

Duka Rasmi la Chapa: BeamZ Amazon Store

9. Media Resources

Below are relevant media resources for the BeamZ LF1500.

Picha za Bidhaa

The BeamZ LF1500 Professional Heavy Fog Machine, showcasing its compact design within a flight case and the flexible output hose for directing fog.

Video Rasmi za Bidhaa

Hakuna video rasmi za bidhaa kutoka kwa muuzaji zilizopatikana katika data iliyotolewa.

	Mwongozo wa Maagizo ya Mashine ya Moshi ya BeamZ S1500 DMX MKII Mwongozo wa kina wa maagizo kwa mashine ya moshi ya BeamZ S1500 DMX MKII, usakinishaji wa kifuniko, uendeshaji, udhibiti wa DMX, matengenezo, na miongozo ya usalama. Inajumuisha vipimo na vifaa.
	Mwongozo wa Maagizo ya Mashine ya Moshi ya Beamz S1500 DMX MKII Mwongozo huu unatoa maagizo ya kina kwa mashine ya moshi ya Beamz S1500 DMX MKII, inayofunika tahadhari za usalama, usakinishaji, njia za uendeshaji (kipima muda, kinachoendelea, cha mwongozo, DMX), matengenezo, vipimo vya kiufundi, na vifuasi vinavyopatikana.
	Mwongozo wa Maagizo ya Mashine ya Moshi ya BeamZ S1800 DMX Mwongozo wa kina wa maagizo ya mashine ya moshi ya BeamZ S1800 DMX, inayofunika usalama, usakinishaji, uendeshaji, udhibiti wa DMX, matengenezo, na vipimo vya kiufundi.
	Mwongozo wa Mtumiaji wa BeamZ IGNITE300A - Taa ya Kichwa ya Kusonga ya Kitaalam ya LED Mwongozo wa kina wa mtumiaji wa BeamZ IGNITE300A ya kitaalamu ya kusonga kichwa stage taa. Inashughulikia usalama, usanidi, udhibiti wa DMX, kubadilishana gobo, kusafisha, matengenezo, utatuzi wa matatizo, menyu ya udhibiti, chaneli za DMX na vipimo vya kiufundi.
	Mwongozo wa Maelekezo ya Mashine ya Theluji ya BeamZ Rage 1800 Mwongozo kamili wa mtumiaji wa mashine ya BeamZ Rage 1800 Snow (Model 160.727), unaohusu usanidi, uendeshaji, tahadhari za usalama, matengenezo, na vipimo vya kiufundi.
	Mwongozo wa Mtumiaji wa Beamz BTF200CZ Fresnel Zoom Mwongozo wa mtumiaji wa kifaa cha taa cha Beamz BTF200CZ Fresnel Zoom, kinachoelezea maelekezo ya usalama, usanidi, uendeshaji, udhibiti wa DMX, usafi, utatuzi wa matatizo, na vipimo vya kiufundi.

Beamz LF1500