1. Utangulizi
This user manual provides essential information for the safe and effective installation, operation, and maintenance of the Noark SHT22N Circuit Breaker Accessory. Please read this manual thoroughly before using the product.
The SHT22N is designed as an accessory for circuit breakers, providing specific functionality within an electrical system. It operates within a voltage range of AC 480-500V at 50/60Hz and has a power consumption of 10VA.
2. Taarifa za Usalama
ONYO: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel. Disconnect power before installation or servicing.
- Daima fuata kanuni za umeme za mitaa na kitaifa.
- Ensure the power supply is completely disconnected and locked out before working on the circuit.
- Verify the accessory's voltage na ukadiriaji wa sasa unalingana na programu yako.
- Usitumie kifaa ikiwa kinaonekana kuharibiwa.
- Tumia vifaa vinavyofaa vya kinga ya kibinafsi (PPE).
3. Bidhaa Imeishaview na Vipengele
The Noark SHT22N is a compact and robust circuit breaker accessory. Its primary features include:
- Mfano: SHT22N
- Voltage Ukadiriaji: AC 480-500V
- Mara kwa mara: 50Hz/60Hz
- Matumizi ya Nguvu: 10VA
- Ukadiriaji wa Sasa: 10 Amps
- Aina ya Kupachika: Plug-In Mount
- Idadi ya miti: 1

Figure 3.1: The Noark SHT22N Circuit Breaker Accessory. This image shows the compact black unit with green labeling indicating "Noark", "SHT22N", "AC 480-500V", "50Hz(60Hz)", and "10VA". Blue wires are connected to the top terminals of the accessory.
4. Kuweka na Kuweka
The SHT22N is designed for plug-in mounting, typically into a compatible circuit breaker or distribution board. Follow these general steps for installation:
- Kukatwa kwa Nguvu: Ensure all power to the circuit where the accessory will be installed is completely disconnected and verified using a voltage tester. Implement lockout/tagtaratibu nje.
- Tambua Mahali pa Kupachika: Locate the designated slot or connection points on the compatible circuit breaker or panel for the SHT22N accessory.
- Usakinishaji wa programu-jalizi: Carefully align the accessory with the mounting interface and firmly push it into place until it is securely seated.
- Viunganisho vya Wiring: Connect the necessary control or signal wires to the terminals of the SHT22N. The image shows blue wires connected to the top. Refer to the specific wiring diagram of your main circuit breaker or system for correct terminal assignments (e.g., C1, C2 as indicated on the unit).
- Thibitisha Miunganisho: Double-check all connections for tightness and correct polarity.
- Rejesha Nguvu: Once installation is complete and verified, safely restore power to the circuit.
Kumbuka: Specific wiring diagrams and installation procedures may vary depending on the main circuit breaker model and system configuration. Always consult the documentation for the primary circuit breaker.
5. Maagizo ya Uendeshaji
The Noark SHT22N functions as an accessory to a main circuit breaker. Its operation is typically integrated with the circuit breaker's functionality, such as shunt tripping or auxiliary contact signaling. The accessory itself does not have user-operable controls.
- Ensure the accessory is correctly installed and wired according to the system's requirements.
- Monitor the overall system for proper operation.
- The accessory's function (e.g., remote tripping) will be activated by external signals or conditions as designed within the electrical system.
6. Matengenezo
The SHT22N circuit breaker accessory is designed for minimal maintenance. However, periodic checks are recommended to ensure continued reliable operation:
- Ukaguzi wa Visual: Periodically inspect the accessory for any signs of physical damage, discoloration, or loose connections.
- Uadilifu wa Muunganisho: Ensure all wiring connections remain tight and secure. Loose connections can lead to overheating or intermittent operation.
- Kusafisha: If necessary, gently clean the exterior of the accessory with a dry, lint-free cloth. Do not use solvents or abrasive cleaners.
- Masharti ya Mazingira: Hakikisha mazingira ya uendeshaji yanasalia ndani ya viwango maalum vya joto na unyevu ili kuzuia kushindwa mapema.
Kumbuka: Any internal servicing or repair should only be performed by the manufacturer or authorized service personnel.
7. Utatuzi wa shida
If you experience issues with the SHT22N accessory, consider the following common troubleshooting steps:
| Tatizo | Sababu inayowezekana | Suluhisho |
|---|---|---|
| Accessory not functioning | Wiring isiyo sahihi Hakuna usambazaji wa umeme Kitengo kilichoharibiwa | Verify all wiring connections against the system diagram. Angalia usambazaji wa umeme kwenye saketi. Inspect for physical damage. If damaged, replace the unit. |
| Operesheni ya mara kwa mara | Miunganisho iliyolegea Voltage kushuka kwa thamani | Kaza miunganisho yote ya terminal. Ensure stable power supply within specified voltage anuwai. |
| Kuzidisha joto | Kupakia kupita kiasi Uingizaji hewa mbaya Miunganisho iliyolegea | Ensure current does not exceed 10 Amps. Verify adequate airflow around the unit. Angalia na kaza miunganisho yote. |
If the problem persists after attempting these steps, contact qualified service personnel or Noark customer support.
8. Vipimo
| Sifa | Maelezo |
|---|---|
| Mfano | SHT22N |
| Chapa | Noark |
| Voltage Upimaji | AC 480-500V |
| Mzunguko | 50Hz/60Hz |
| Matumizi ya Nguvu | 10VA |
| Ukadiriaji wa Sasa | 10 Amps |
| Aina ya Mvunjaji wa Mzunguko | Kawaida |
| Aina ya Kuweka | Plug-In Mount |
| Idadi ya Poles | 1 |
| Vipimo vya Kifurushi | Inchi 1 x 1 x 1 |
| Uzito | Pauni 1.44 |
| Mtengenezaji | NOARK |
| Tarehe ya Kwanza Inapatikana | Januari 1, 2016 |
9. Taarifa za Udhamini
Noark products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the official Noark warranty statement available on their website or contact their customer support. Typically, warranties cover defects in materials and workmanship under normal use.
10. Msaada kwa Wateja
For technical assistance, product inquiries, or service requests, please contact Noark customer support. Have your product model (SHT22N) and any relevant purchase information ready when contacting support.
You can typically find contact information (phone, email, website) on the official Noark webtovuti au ufungaji wa bidhaa.





