Mwongozo wa Mtumiaji wa Maikrofoni Isiyotumia Waya ya Mipro MR-823 kwa Mkono Mbili

Utangulizi

Thank you for choosing the Mipro MR-823 Dual Hand Wireless Microphone system. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new wireless microphone system. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Taarifa za Usalama

Usiweke kifaa kwenye mvua au unyevu ili kuzuia moto au mshtuko wa umeme.
Usiweke vitu vilivyojaa vimiminika, kama vile vazi, kwenye kitengo.
hakikisha uingizaji hewa sahihi; usizuie fursa yoyote ya uingizaji hewa.
Tumia viambatisho/vifaa vilivyobainishwa na mtengenezaji pekee.
Rejelea huduma zote kwa wafanyikazi waliohitimu wa huduma. Huduma inahitajika wakati vifaa vimeharibiwa kwa njia yoyote.

Yaliyomo kwenye Kifurushi

Tafadhali angalia yaliyomo kwenye kifurushi chako ili kuhakikisha kuwa bidhaa zote zipo:

1 x Mipro MR-823 Wireless Receiver Unit
2 x Handheld Wireless Microphones
Adapta ya Nguvu
Kebo ya Sauti

Bidhaa Imeishaview

The Mipro MR-823 system consists of a receiver unit and two handheld wireless microphones, designed for clear and reliable audio transmission.

Mipro MR-823 Dual Hand Wireless Microphone system with receiver and two handheld microphones.

This image displays the complete Mipro MR-823 Dual Hand Wireless Microphone system. It features a sleek, rectangular receiver unit with a control panel and two antennas, accompanied by two black handheld wireless microphones. The microphones have silver grilles and blue accents near the base of the grille.

Receiver Unit Features:

Front panel display for channel and status indication.
Volume controls for each microphone channel.
Antenna inputs for optimal signal reception.
Audio output jacks (XLR and 1/4" unbalanced) on the rear panel.

Handheld Microphone Features:

Integrated transmitter.
Kubadili nguvu.
Sehemu ya betri.

Sanidi

Fungua Vipengee: Ondoa kwa uangalifu vitu vyote kutoka kwa kifurushi.
Mpokeaji wa Nafasi: Place the receiver unit on a stable, flat surface, away from potential sources of interference (e.g., computers, Wi-Fi routers). Ensure adequate ventilation around the unit.
Unganisha Antena: Screw the two antennas securely into their respective connectors on the rear of the receiver. Position them vertically for best reception.
Unganisha Pato la Sauti: Connect the receiver's audio output (XLR or 1/4" unbalanced) to your mixer, amplifier, or sound system using the provided audio cable.
Unganisha Nguvu: Plug the power adapter into the DC input on the receiver and then into a suitable power outlet. Do not power on the unit yet.
Install Microphone Batteries: Open the battery compartment of each handheld microphone and insert fresh batteries, observing the correct polarity.
Washa: Turn on your audio system first, then power on the Mipro MR-823 receiver. Finally, turn on each handheld microphone.

Maagizo ya Uendeshaji

Usawazishaji wa Kituo:

The MR-823 system typically features automatic frequency synchronization. Once the receiver and microphones are powered on, they should automatically link to an available clear channel. Refer to the receiver's display for channel information.

Kurekebisha Sauti:

Use the individual volume control knobs on the front panel of the receiver to adjust the output level of each microphone. Start with a low volume and gradually increase it to avoid feedback or distortion.

Matumizi ya maikrofoni:

Shikilia maikrofoni takriban inchi 2-6 kutoka mdomoni mwako kwa ajili ya upigaji sauti bora.
Avoid covering the microphone grille with your hand, as this can affect sound quality and signal strength.
Ensure a clear line of sight between the microphones and the receiver for best wireless performance.

Matengenezo

Kusafisha: Use a soft, dry cloth to clean the exterior of the receiver and microphones. Do not use liquid cleaners or abrasive chemicals.
Ubadilishaji wa Betri: Replace microphone batteries when the low battery indicator appears or when audio quality degrades. Always use fresh, high-quality batteries.
Hifadhi: When not in use for extended periods, remove batteries from the microphones and store the system in a cool, dry place, away from direct sunlight and extreme temperatures.
Utunzaji wa Antena: Handle antennas carefully to avoid bending or breaking.

Kutatua matatizo

Tatizo	Sababu inayowezekana	Suluhisho
Hakuna sauti kutoka kwa maikrofoni	Microphone not powered on; Low or dead batteries; Receiver not powered on; Volume too low; Microphone out of range; Frequency mismatch.	Ensure microphone and receiver are on; Replace batteries; Check receiver power; Increase volume; Move closer to receiver; Re-sync frequencies if necessary.
Ubora duni wa sauti / Tuli	Interference; Low batteries; Microphone too far from receiver; Obstructions; Incorrect gain settings.	Change operating frequency (if available); Replace batteries; Reduce distance; Remove obstructions; Adjust receiver volume.
Maoni (sauti ya kunguruma)	Microphone too close to speakers; Volume too high; Room acoustics.	Move microphone away from speakers; Lower volume; Adjust speaker placement or use acoustic treatment.
Masafa mafupi ya wireless	Obstructions; Interference; Antenna position.	Ensure clear line of sight; Re-position antennas; Avoid placing receiver near metal objects or other wireless devices.

Vipimo

Kipengele	Vipimo
Chapa	MIPRO
Mfano	MR-823
Impedans	250 ohm
Chanzo cha Nguvu	Inaendeshwa na Betri
Signal-kwa-kelele uwiano	78 dB
Masafa ya Marudio	100 Hz - 10 KHz
Majibu ya Mara kwa mara	16 kHz
Vipimo vya Kifurushi	34.01 x 24.99 x 21.01 cm
Uzito wa Kipengee	122 g
Betri Inahitajika	No (for receiver, but yes for microphones)
Kipengele Maalum	Bila waya
Rangi	Nyeusi
Muundo wa Polar	Omnidirectional

Udhamini na Msaada

For warranty information and technical support, please refer to the warranty card included with your product or visit the official MIPRO webtovuti. Weka risiti yako ya ununuzi kama dhibitisho la ununuzi kwa madai yoyote ya udhamini.

If you encounter issues not covered in this manual, please contact MIPRO customer service or your authorized dealer for assistance.

	MIPRO MR-823 / MH-80 / MT-801 / MT-801a UHF Dual-Channel Diversity Wireless Microphone System User Guide This user guide provides comprehensive instructions for setting up, operating, and maintaining the MIPRO MR-823, MH-80, and MT-801/MT-801a wireless microphone systems. Learn about parts identification, installation, operating tips, and important safety precautions for optimal performance.
	MIPRO MR-823 \| MH-80 \| MT-801 \| Mwongozo wa Mtumiaji wa Mfumo wa Maikrofoni Isiyo na waya wa MT-801a UHF Mwongozo wa mtumiaji wa Mfumo wa Maikrofoni wa MIPRO MR-823 Dual-Channel Diversity Wireless, ikijumuisha maelezo kuhusu visambaza sauti vya MH-80 na MT-801/MT-801a. Inashughulikia maagizo ya usalama, majina ya sehemu, usakinishaji, vidokezo vya uendeshaji na tahadhari.
	Mwongozo wa Mtumiaji wa Maikrofoni ya MIPRO MU-13, MU-23, MU-210 Mwongozo wa kina wa watumiaji wa maikrofoni za MIPRO MU-13, MU-23, na MU-210 zinazovaliwa kichwani, unaojumuisha majina ya sehemu, unganisho, maagizo ya uvaaji, vidokezo vya kurekebisha, michoro ya nyaya, na uboreshaji wa ubora wa sauti.
	MIPRO MM-58 Wired Microphone User Guide User guide for the MIPRO MM-58 Wired Microphone, detailing specifications, frequency response, polar pattern, and important cautions for use and disposal.
	MIPRO MU-506H/MU-506HS Headworn Microphone User Guide User guide for MIPRO MU-506H and MU-506HS unidirectional headworn microphones, covering part names, assembly instructions, optimal sound quality tips, wiring illustrations, and company information.
	MIPRO MU-57H & MU-57HS Waterproof Headworn Microphone User Guide Comprehensive user guide for the MIPRO MU-57H and MU-57HS waterproof headworn microphones. This guide details part identification, optional connector types, assembly instructions, tips for optimal sound quality, wiring diagrams, important notes, and environmental disposal guidelines.

MIPRO MR-823