Utangulizi
The Darkglass MicroTubes 500 V2 Bass Head is a powerful and versatile amplifier designed for bass players seeking exceptional tone and performance. This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your amplifier to ensure optimal use and longevity.
It features 500 watts of all-analog power, a versatile 6-band graphic EQ, a VCA compressor, and three IR cabinet simulation presets, making it a complete tool for modern bass players.
Taarifa za Usalama
Please read and understand all safety instructions before operating the MicroTubes 500 V2. Retain this manual for future reference.
- Ugavi wa Nguvu: Use only the specified power cord and connect to a grounded outlet. Ensure the voltage inalingana na ampmahitaji ya lifier.
- Uingizaji hewa: Usizuie fursa za uingizaji hewa. Hakikisha mtiririko wa hewa wa kutosha kuzunguka kitengo ili kuzuia joto kupita kiasi.
- Unyevu: Do not expose the unit to rain, moisture, or excessive humidity. Keep liquids away from the ampmaisha zaidi.
- Kuhudumia: Usijaribu kuhudumia kitengo mwenyewe. Rejelea huduma zote kwa wahudumu waliohitimu.
- Viunganisho vya Spika: Daima kuunganisha amplifier to a speaker cabinet with the correct impedance before powering on. Incorrect impedance can damage the ampmaisha zaidi.
- Ulinzi wa kusikia: Mfiduo wa muda mrefu wa viwango vya juu vya sauti inaweza kusababisha uharibifu wa kudumu wa kusikia. Tumia tahadhari wakati wa kuweka viwango vya sauti.
Sifa Muhimu
- Delivers 500 watts of all-analog power for dynamic and punchy bass tones.
- Features a versatile 6-band graphic EQ for precise tonal shaping and customization.
- Includes a VCA compressor for studio-quality dynamic control and sustain.
- Equipped with three IR cabinet simulation presets for lifelike direct performance.
- True bypass circuitry maintains signal integrity when the amp imekataliwa.
- Offers dual speaker outputs with 1/4-inch and speakON connectivity options.
- Send/return loop for easy integration of pedals and external effects processors.
- Passive/Active input mode selector to optimize performance for different bass pickups.
- Rear-panel XLR DI output for direct recording and connection to PA systems.
- Compact and lightweight design for easy transport and gigging convenience.
Vidhibiti na Viunganisho
Udhibiti wa Paneli ya Mbele
Picha: Mbele view of the Darkglass MicroTubes 500 V2 Bass Head, showing all knobs, buttons, and the graphic equalizer.
- Ingizo: Standard 1/4" instrument input.
- Passive/Active Switch: Selects between passive and active input modes to accommodate different bass pickup outputs.
- Comp (Compressor): Controls the amount of compression applied to the signal.
- Microtubes Engine Switch: Engages the Microtubes distortion circuit.
- VMT (Vintage Microtubes) Switch: Selects the Vintage Microtubes mode for a warmer, more organic overdrive.
- B3K (B3K Microtubes) Switch: Selects the B3K Microtubes mode for a more aggressive, modern distortion.
- Endesha: Adjusts the amount of gain for the Microtubes Engine.
- Toni: Controls the character of the Microtubes Engine distortion.
- Mchanganyiko: Mixes the clean signal with the Microtubes Engine signal.
- Kiwango: Controls the overall output level of the Microtubes Engine.
- Mlinganyo wa Picha: Six sliders for precise frequency shaping at 250 Hz, 500 Hz, 1.5 kHz, 3 kHz, and 5 kHz.
- Mwalimu: Hudhibiti kiasi cha jumla cha pato la faili ya ampmaisha zaidi.
Viunganisho vya Paneli ya Nyuma
Picha: Nyuma view of the Darkglass MicroTubes 500 V2 Bass Head, displaying all input and output jacks, including speaker outputs, effects loop, USB, and DI output.
- Speaker Output (Min. 2Ω): Dual outputs for connecting to speaker cabinets, supporting both speakON and 1/4" connections.
- Send/Return: Effects loop for integrating external effects pedals and processors.
- Kubadilisha miguu: Input for an optional footswitch to control Microtubes Engine engagement.
- Aux Katika: 1/8" stereo input for connecting external audio devices (e.g., MP3 player) for practice.
- Vipokea sauti vya masikioni: 1/8" stereo output for silent practice.
- USB: USB-C port for connecting to a computer for firmware updates and Darkglass Suite software access (for IR loading and settings).
- Cab Select: Switch to cycle through the three onboard Impulse Response (IR) cabinet simulations.
- Kubadilisha Kabla/Chapisho: Huamua kama ishara ya pato la DI inachukuliwa kabla ya (Kabla) au baada ya (Baada) ya amplifier's tone shaping and effects.
- GND Lift: Ground lift switch to eliminate hum or ground loop noise.
- Pato la DI: Balanced XLR output for direct connection to a mixing console or audio interface.
- Ingizo la Nguvu: Standard IEC power connector.
- Kubadilisha Nguvu: Inageuka amplifier juu au mbali.
Sanidi
- Muunganisho wa Nishati: Connect the supplied power cord to the amplifier's power input and then to a grounded AC outlet.
- Muunganisho wa Spika: Connect your bass speaker cabinet(s) to the "Speaker Output" jacks on the rear panel. Ensure the total impedance of your cabinets is 2 ohms or higher. Use high-quality speaker cables.
- Muunganisho wa Ala: Plug your bass guitar into the "Input" jack on the front panel. Select "Passive" or "Active" based on your bass's pickups.
- Viunganisho vya Chaguo:
- For effects pedals, connect them to the "Send" and "Return" jacks.
- For direct recording or PA system connection, use the "DI Output" XLR jack. Adjust the "Pre/Post" switch as needed.
- For silent practice, connect headphones to the "Headphones" jack.
- To play along with music, connect an audio device to the "Aux In" jack.
- To manage IRs or update firmware, connect a USB-C cable to the "USB" port and your computer.
- Washa: Ensure all connections are secure, then flip the "Power Switch" on the rear panel to the ON position.
Maagizo ya Uendeshaji
Operesheni ya Msingi
- Start with the "Master" volume knob at a low setting.
- Adjust the "Comp" knob to control the amount of compression. Higher settings provide more sustain and a more even dynamic response.
- Use the "Graphic EQ" sliders to shape your tone. Experiment with different frequencies to find your desired sound.
- Gradually increase the "Master" volume to your desired listening level.
Using the Microtubes Engine
The Microtubes Engine provides two distinct distortion modes:
- VMT (Vintage Microtubes): Engages a warm, organic overdrive reminiscent of classic tube amplifiers. Ideal for vintage rock and blues tones.
- B3K (B3K Microtubes): Engages a more aggressive, modern distortion with enhanced clarity and punch. Suitable for heavier genres.
To activate the Microtubes Engine, press the "Microtubes Engine" switch. Select your desired character using the "VMT" or "B3K" switches. Use the "Drive" knob to control the amount of distortion, "Tone" to adjust its character, and "Blend" to mix the distorted signal with your clean signal. The "Level" knob controls the output volume of the Microtubes Engine.
Cabinet Simulation (IRs)
The MicroTubes 500 V2 includes three onboard Impulse Response (IR) cabinet simulations. These can be accessed via the "DI Output" and "Headphones" output. Use the "Cab Select" switch on the rear panel to cycle through the available IRs. Additional IRs can be loaded and managed using the Darkglass Suite software via the USB connection.
Image: Screenshot of the Darkglass Suite software interface, showing options for selecting and managing cabinet impulse responses.
Matengenezo
- Kusafisha: Tumia kitambaa laini, kavu kusafisha amplifier's exterior. Do not use abrasive cleaners or solvents.
- Hifadhi: Hifadhi ya amplifier mahali pakavu na penye baridi mbali na jua moja kwa moja na halijoto kali.
- Usafiri: Unaposafirisha kifaa, hakikisha kimefungashwa vizuri ili kuzuia uharibifu wa kimwili.
- Uingizaji hewa: Regularly check that the ventilation grilles are free from dust and debris.
Kutatua matatizo
| Tatizo | Sababu inayowezekana | Suluhisho |
|---|---|---|
| Hakuna pato la sauti. |
|
|
| Sauti iliyopotoka au dhaifu. |
|
|
| Kelele ya mlio au kelele. |
|
|
Vipimo
| Sifa | Thamani |
|---|---|
| Nambari ya Mfano | M500V2 |
| Pato Wattage | 500 Watts |
| Uzito wa Kipengee | Pauni 7.37 |
| Vipimo vya Bidhaa | Inchi 12.1 x 11.65 x 4.05 |
| Aina ya Nyenzo | Chuma |
| Rangi | Nyeusi |
| Chanzo cha Nguvu | Umeme wa Cord |
| Vifaa Sambamba | Gitaa la Bass |
| Aina ya kiunganishi | XLR, 1/4", speakON, USB-C |
Udhamini na Msaada
Darkglass Electronics products are covered by a limited warranty. For detailed warranty information, product registration, and technical support, please visit the official Darkglass Electronics webtovuti au wasiliana na idara yao ya huduma kwa wateja.
Official Darkglass Electronics Webtovuti: www.darkglass.com
