Mwongozo wa Mtumiaji wa Kesi ya Michezo ya Kompyuta ya Aerocool Bolt Mid-Tower RGB

Utangulizi

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Aerocool Bolt Mid-Tower RGB PC Gaming Case. Please read this manual thoroughly before beginning assembly or operation to ensure proper usage and to maximize the lifespan of your product.

Mchoro 1: Mbele-kushoto view of the Aerocool Bolt Mid-Tower RGB PC Gaming Case, showcasing the full acrylic side panel and the RGB LED strip on the front panel.

Sifa Muhimu

• Mid-Tower ATX form factor.
• Stylish RGB LED strip on the front panel with 13 lighting modes (6 RGB flow, 7 static colors).
• Full acrylic side panel for component visibility.
• Carbon fiber style front panel finish.
• Supports ATX, Micro-ATX, and Mini-ITX motherboards.
• Liquid cooling support up to 240mm.
• Up to six 120mm fans (one 120mm black fan included at the rear).
• Dual chamber design for improved cooling.
• Front I/O panel with USB 3.0 and USB 2.0 ports.

Kuweka na Kuweka

Before beginning installation, ensure your workspace is clean and static-free. Refer to your component manuals for specific installation instructions.

1. Kutayarisha Kesi

1. Ondoa Paneli za Upande: Carefully unscrew the thumbscrews on the rear of the case for both the acrylic side panel and the solid metal side panel. Gently slide the panels backward and lift them off.
2. Sanduku la nyongeza: Locate the accessory box inside the case, which contains screws, cable ties, and other mounting hardware.

Kielelezo 2: Upande view of the case, highlighting the full acrylic side panel. This panel provides a clear view ya vipengele vya ndani.

2. Ufungaji wa Motherboard

1. Sakinisha Vikwazo: Ensure the correct standoffs are installed for your motherboard size (ATX, Micro-ATX, or Mini-ITX). The case comes with pre-installed standoffs for ATX. Adjust as necessary.
2. Sakinisha Ngao ya I/O: Snap your motherboard's I/O shield into the rear opening of the case.
3. Mlima Motherboard: Weka ubao wako wa mama kwa uangalifu kwenye sehemu za kusimama, ukiweka mashimo ya skrubu sawa. Ifunge kwa skrubu zilizotolewa.

Kielelezo 3: Ndani view of the case, illustrating the motherboard mounting area, cable management cutouts, and drive bays.

3. Ufungaji wa Kitengo cha Ugavi wa Nguvu (PSU).

• The PSU mounts at the bottom rear of the case. Slide your PSU into the dedicated compartment from the rear.
• Secure the PSU with screws from the outside of the case.
• Route necessary cables through the cutouts into the main chamber for component connection.

4. Usakinishaji wa Hifadhi ya Hifadhi

• HDD za inchi 3.5: Install 3.5" hard drives into the drive cage located beneath the PSU shroud. Slide them in and secure with screws.
• SSD za inchi 2.5: Mount 2.5" SSDs to the dedicated mounting points on the motherboard tray or the PSU shroud. Secure with screws.

5. Ufungaji wa Kadi ya Michoro (GPU).

• Ondoa vifuniko muhimu vya nafasi ya PCIe kutoka nyuma ya kesi.
• Insert your graphics card into the appropriate PCIe slot on the motherboard.
• Secure the graphics card to the case with screws. The case supports high-end graphics cards up to 355mm in length.

6. Cooling System Installation (Fans & Liquid Cooling)

• Mashabiki: The case supports up to six 120mm fans. One 120mm fan is pre-installed at the rear. Additional fans can be installed at the front (up to 3x 120mm), top (up to 2x 120mm), and PSU shroud (2x 120mm for VGA cooling).
• Upoaji wa Kioevu: A 240mm radiator can be installed at the front of the case.
• Hakikisha mwelekeo sahihi wa mtiririko wa hewa kwa ajili ya upoezaji bora.

Mchoro 4: Juu mbele view of the case, displaying the power button, USB 3.0, USB 2.0 ports, and audio jacks.

7. Usimamizi wa Cable

• Tumia vipandikizi vya usimamizi wa kebo na sehemu za kuunganisha nyuma ya trei ya ubao mama ili kuelekeza na kufunga nyaya. Hii inaboresha mtiririko wa hewa na uzuri.
• Connect all necessary power and data cables to your components.
• Connect the case's front panel connectors (USB, audio, power switch, reset switch, LED switch) to the appropriate headers on your motherboard.

Maagizo ya Uendeshaji

RGB LED Lighting Control

The Aerocool Bolt case features an integrated RGB LED strip on the front panel with multiple lighting modes. Control is managed via a dedicated LED control switch located on the top I/O panel.

• Washa: After connecting the case's RGB cable to your power supply (usually via a SATA power connector), the RGB strip will illuminate upon system startup.
• Badilisha Modi: Press the LED control switch (often labeled "LED" or a lightbulb icon) on the top panel to cycle through the 13 available lighting modes. These include 6 RGB flow effects and 7 static color modes.
• Turn Off/On: Press and hold the LED control switch for a few seconds to turn the RGB lighting off. Press it again briefly to turn it back on.

Matengenezo

Matengenezo ya mara kwa mara husaidia kuhakikisha utendaji bora na uimara wa kisanduku cha PC yako.

• Kusafisha vumbi: Safisha vichujio vya vumbi mara kwa mara (kama vipo) na vipengele vya ndani kwa kutumia hewa iliyobanwa. Hakikisha mfumo umezimwa na kuchomoka kabla ya kusafisha.
• Acrylic Side Panel: Clean the acrylic side panel with a soft, lint-free cloth and a mild, non-abrasive cleaner specifically designed for plastics. Avoid harsh chemicals or abrasive materials, as they can scratch the surface.
• Usimamizi wa Cable: Mara kwa mara angalia uelekezaji wa kebo ili kuhakikisha kuwa hakuna kebo zinazozuia mtiririko wa hewa au vile vya feni.

Kutatua matatizo

Sehemu hii inashughulikia masuala ya kawaida ambayo unaweza kukutana nayo.

• Hakuna Nguvu:
  • Hakikisha PSU imeunganishwa vizuri kwenye soketi ya ukutani na swichi ya umeme kwenye PSU iko katika nafasi ya "WASHA".
  • Verify that the case's front panel power switch cable is correctly connected to the motherboard's power header.
• Taa ya RGB haifanyi kazi:
  • Check if the RGB LED strip's power cable (usually SATA) is securely connected to your power supply.
  • Ensure the LED control switch cable from the front panel is connected to the appropriate header on the RGB controller (if applicable) or directly to the LED strip.
  • Try pressing the LED control switch to cycle through modes or holding it down to turn it on/off.
• Mtiririko Mbaya wa Hewa/Joto Kupita Kiasi:
  • Ensure all installed fans are spinning and oriented correctly for optimal airflow (intake at front/bottom, exhaust at rear/top).
  • Clean any dust buildup on fans and filters.
  • Verify that cables are neatly managed and not obstructing airflow.
• Bandari za USB hazifanyi kazi:
  • Check if the USB 3.0 and USB 2.0 cables from the front panel are correctly connected to the corresponding headers on your motherboard.

Vipimo

Taarifa ya Udhamini

AeroCool products typically come with a limited manufacturer's warranty. For specific warranty terms and conditions, including duration and coverage, please refer to the warranty card included with your product or visit the official AeroCool webtovuti. Weka uthibitisho wako wa ununuzi kwa madai ya udhamini.

Usaidizi wa Wateja

If you encounter issues not covered in this manual or require further assistance, please contact AeroCool customer support. Contact information can usually be found on the official AeroCool webtovuti au kwenye ufungaji wa bidhaa.

Webtovuti: www.aerocool.io (Tafadhali thibitisha afisa wa sasa webtovuti kwa msaada.)