Miongozo+

Pedrollo JSWm/2CX

PEDROLLO JSWm/2CX Self-Priming Water Pump User Manual

Model: JSWm/2CX | Brand: Pedrollo

Utangulizi

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your PEDROLLO JSWm/2CX self-priming water pump. Please read these instructions carefully before installation or use and retain them for future reference.

PEDROLLO JSWm/2CX Self-Priming Water Pump

Kielelezo cha 1: PEDROLLO JSWm/2CX Self-Priming Water Pump. This image shows the blue-colored pump unit with its motor housing and pump body, designed for efficient water transfer.

Taarifa za Usalama

Always observe the following safety precautions to prevent injury or damage to the pump:

  • Ensure the pump is installed by a qualified professional.
  • Ondoa nishati kabla ya kufanya matengenezo au huduma yoyote.
  • Usitumie pampu kwa vimiminika vinavyoweza kuwaka au kutu.
  • Kinga pampu kutokana na halijoto ya kuganda.
  • Hakikisha msingi sahihi wa muunganisho wa umeme.

Bidhaa Imeishaview

The PEDROLLO JSWm/2CX is a self-priming centrifugal pump designed for reliable water transfer. It is suitable for pumping clean water and liquids that are not chemically aggressive to the pump's components. Its self-priming capability allows it to draw water even when air is present in the suction line, making it ideal for domestic water supply, small to medium autoclave tank systems, and garden irrigation.

Sifa Muhimu:

  • Self-priming design for efficient operation.
  • Suitable for clean water and non-aggressive liquids.
  • Robust construction with stainless steel components.
  • Designed for continuous duty in domestic and garden applications.

Kuweka na Kuweka

Proper installation is crucial for the pump's performance and longevity. Consult a qualified technician for installation.

  1. Mahali: Install the pump in a dry, well-ventilated area, protected from direct sunlight and freezing temperatures. Ensure adequate space for maintenance.
  2. Kupachika: Securely fasten the pump to a stable, level surface using appropriate bolts to minimize vibration.
  3. Upigaji bomba:
    • Use pipes of adequate diameter to minimize friction losses.
    • Ensure all connections are airtight, especially on the suction side, to prevent air ingress.
    • Install a foot valve with a strainer at the end of the suction pipe to prevent debris from entering the pump and to maintain prime.
    • Install a gate valve on both the suction and discharge sides for isolation during maintenance.
  4. Muunganisho wa Umeme:
    • Connect the pump to a suitable power supply (220-230V, 50Hz) as indicated on the motor's data plate.
    • Ensure the electrical circuit is protected by a residual current device (RCD) and an appropriately rated circuit breaker.
    • Verify proper grounding according to local electrical codes.
  5. Kuanza: Before initial startup, completely fill the pump casing and the suction line with clean water through the priming port. This is essential for self-priming pumps to initiate operation.

Maagizo ya Uendeshaji

  1. Uanzishaji wa Awali: After installation and priming, open the discharge valve fully. Switch on the power supply. The pump should start and begin to draw water.
  2. Operesheni inayoendelea: Monitor the pump for unusual noises or vibrations. Ensure the pump is not running dry, as this can cause severe damage.
  3. Kuzimisha: To stop the pump, switch off the power supply. If the pump is part of an automatic system (e.g., with a pressure switch), it will start and stop automatically based on demand.
  4. Vikomo vya Joto:
    • Liquid temperature: up to +40 °C.
    • Ambient temperature: -10 °C to +40 °C.

Matengenezo

Regular maintenance ensures optimal performance and extends the pump's lifespan. Always disconnect power before maintenance.

  • Ukaguzi wa Mara kwa Mara: Inspect the pump and piping for leaks, corrosion, or damage.
  • Kusafisha Kichujio: Periodically clean the foot valve strainer to prevent blockages and maintain flow.
  • Majira ya baridi: In areas prone to freezing, drain the pump completely and store it in a warm, dry place, or insulate it adequately to prevent damage from ice expansion.
  • Ukaguzi wa magari: Hakikisha mapezi ya kupozea ya injini hayana vumbi na uchafu ili kuzuia joto kupita kiasi.

Kutatua matatizo

TatizoSababu inayowezekanaSuluhisho
Pampu haianzaNo power supply; Motor overload; Seized impeller.Check power connection and circuit breaker; Reset thermal overload; Contact service technician.
Pampu inapita lakini hakuna maji yanayotolewaPump not primed; Air leak in suction line; Foot valve clogged; Suction lift too high.Re-prime the pump; Check all suction connections for leaks; Clean foot valve strainer; Reduce suction lift if possible.
Mtiririko au shinikizo lililopunguaPartial blockage in piping; Worn impeller; Air in system.Inspect and clear piping; Contact service technician for impeller replacement; Bleed air from system.
Kelele nyingi au mtetemoCavitation (air in water); Loose mounting; Bearing wear.Check for air leaks and ensure proper priming; Tighten mounting bolts; Contact service technician.

Vipimo

KigezoThamani
MfanoJSWm/2CX
ChapaPedrollo
Nguvu (HP)1 HP
Voltage / Mzunguko220-230V / 50Hz
Kiwango cha Juu cha MtiririkoLita 70 kwa dakika
Kiwango cha joto cha kioevuUp to +40 °C
Masafa ya Halijoto ya Mazingira-10 °C hadi +40 °C
NyenzoStainless Steel (pump body components)
ASINB07HMZ2DKQ
Kanuni ya Makala ya Kimataifa08052230012515

Note: The specification for "Power: 220 Watts" found in some product listings may refer to a specific component or a different metric. The pump's performance is rated at 1 HP.

Udhamini na Msaada

For warranty information, technical support, or spare parts, please contact your authorized Pedrollo dealer or visit the official Pedrollo webtovuti. Weka risiti yako ya ununuzi kama uthibitisho wa ununuzi.

Mtengenezaji: PEDROLLO

Nyaraka Zinazohusiana - JSWm/2CX

Kablaview Kifaa cha Ulinzi wa Kielektroniki cha Pedrollo EP - Mwongozo wa Mtumiaji na Laha ya Data
Mwongozo kamili wa Kifaa cha Ulinzi cha Kielektroniki cha Pedrollo EP, ukielezea vipengele vyake, vipimo vya kiufundi, usakinishaji, na uendeshaji. Hulinda pampu kutokana na mtiririko kavu, mkondo wa kupita kiasi, na mvuke wa kupita kiasitage, na undervolvetage. Inafaa kwa matumizi ya nyumbani.
Kablaview Paneli za Umeme za Kielektroniki za Pedrollo E1-E2 kwa Pampu
Mwongozo kamili wa paneli za udhibiti wa kielektroniki za Pedrollo E1 na E2, zilizoundwa kwa ajili ya kusimamia mifumo ya pampu moja au mbili katika mazingira ya makazi, biashara, na viwanda. Vipengele vinajumuisha njia za uendeshaji zinazoweza kuchaguliwa, ulinzi wa uendeshaji kavu, na violesura vya mtumiaji vinavyoweza kubadilika kwa ajili ya uendeshaji mzuri wa pampu.
Kablaview Pedrollo STEADYPRES: Variatore Elettronico di Frequenza per Pompe
Mwongozo umekamilishwa kwa Pedrollo STEADYPRES, bila kibadilishaji kigeuzi kwa kila il controllo di elettropompe. Offre istruzioni dettagliate su installazione, configurazione, funzionamento, gestione allarmi, risoluzione guasti e dati tecnici per ottimizzare la pressione e proteggere la pompa.
Kablaview Pampu za Kujipumzisha za JSW JET: Utendaji, Data ya Kiufundi, na Nyenzo
Vipimo vya kina vya kiufundi, mikunjo ya utendaji, vipimo, vifaa, na data ya matumizi ya pampu za kujipaka za JSW JET na Pedrollo. Inafaa kwa matumizi ya nyumbani, kiraia, na viwandani.
Kablaview Pedrollo PLURIJET 80-100 & 80X-100X Self-Priming Multi-Stage Karatasi ya data ya Pampu
Uainisho wa kina wa kiufundi, data ya utendakazi, mwongozo wa usakinishaji, na maelezo ya ujenzi kwa mfululizo wa Pedrollo PLURIJET 80-100 na PLURIJET 80X-100X wa vifaa vingi vya kujiendesha.tagpampu za e, zinazofaa kwa matumizi ya nyumbani na ya kiraia.
Kablaview Pampu Zinazozamishwa za Pedrollo TRITUS zenye Kisagia: Vipimo vya Kiufundi na Matumizi
Chunguza vipimo vya kiufundi, mikunjo ya utendaji, vipimo, na miongozo ya usakinishaji wa pampu zinazozamishwa za Pedrollo TRITUS zenye mashine za kusaga. Inafaa kwa usimamizi wa maji machafu ya majumbani na ya umma.