1. Utangulizi
This manual provides detailed instructions for the safe installation, operation, and maintenance of your BESTTEN 15 Amp Decorator Receptacle Outlets. These outlets are designed for residential and commercial applications, offering a reliable and aesthetically pleasing electrical connection point. Please read this manual thoroughly before installation and retain it for future reference.
2. Taarifa Muhimu za Usalama
WARNING: RISK OF ELECTRIC SHOCK OR FIRE. IMPROPER INSTALLATION CAN RESULT IN SERIOUS INJURY OR DEATH.
- Always turn off power at the circuit breaker or fuse box before installing or servicing any electrical outlet.
- Tumia juzuutagkipimaji cha umeme ili kuthibitisha kuwa umeme umezimwa kabla ya kugusa waya wowote.
- Installation must be performed by a qualified electrician or a person with a thorough understanding of electrical wiring and building codes.
- Hakikisha miunganisho yote ya nyaya ni salama na imewekewa maboksi ipasavyo.
- Do not exceed the specified electrical ratings of 15A/125V/1875W.
- Bidhaa hii imekusudiwa kwa matumizi ya ndani tu.
- Keep children away from electrical work areas.
3. Yaliyomo kwenye Kifurushi
Thibitisha kuwa vipengele vyote vipo kabla ya kuanza usakinishaji:
- BORA 15 Amp Decorator Receptacle Outlets (Quantity as purchased, e.g., 50 pack)
- Decorator Wallplates
- Kuweka Screws

Image: A collection of BESTTEN 15 Amp Decorator Receptacle Outlets and their corresponding wallplates, illustrating the product's appearance and included accessories.
4. Vipimo
| Kipengele | Maelezo |
|---|---|
| Nambari ya Mfano | USP-15-B-50PK |
| Ukadiriaji wa Umeme | 15A/125V/1875W |
| Rangi | White (Gloss Finish) |
| Nyenzo | Polycarbonate (PC) Thermoplastic |
| Dimensions (Outlet) | 4.06" H x 1.29" W x 0.98" D (10.3cm H x 3.28cm W x 2.51cm D) |
| Dimensions (Wallplate) | 4.5" H x 2.75" W (11.4cm H x 6.98cm W) |
| Chaguzi za Wiring | Side Wiring (12 or 14 AWG), Back Push-in Wiring (14 AWG only) |
| Vyeti | UL/CUL Imeorodheshwa |

Image: A detailed diagram showing the dimensions of the BESTTEN decorator receptacle outlet and its accompanying wallplate.
5. Maagizo ya Ufungaji
Follow these steps carefully to install your BESTTEN decorator receptacle outlet. Ensure power is OFF before proceeding.
Zana Zinazohitajika (Hazijajumuishwa):
- Screwdriver (Phillips na/au Flathead)
- Waya Strippers
- Voltage Jaribio
- Tape ya Umeme (hiari)
Hatua za Ufungaji:
- Zima Nguvu: Locate the circuit breaker or fuse that controls the outlet you are replacing or installing. Turn it OFF. Verify power is off using a voltagjaribu.
- Remove Old Outlet (if applicable): Unscrew and carefully pull the old outlet from the wall box. Disconnect the wires, noting which wire was connected to which terminal.
- Andaa waya: Strip approximately 1/2 inch (12-14 mm) of insulation from the ends of the electrical wires. Ensure the wire ends are clean and straight.
- Unganisha Waya: The BESTTEN decorator receptacle supports both side wiring and back push-in wiring.
- Side Wiring (12 or 14 AWG solid copper wire): Loosen the terminal screws. Wrap the stripped end of the wire clockwise around the appropriate screw terminal and tighten securely.
- Hot/Live Wire (Black): Connect to the brass-colored screw terminals.
- Waya Isiyo na Upande (Nyeupe): Connect to the silver-colored screw terminals.
- Ground Wire (Green or Bare Copper): Connect to the green screw terminal.
- Back Push-in Wiring (14 AWG solid copper wire ONLY): Insert the stripped end of the wire firmly into the corresponding back-wire hole until it stops. Ensure no bare wire is exposed. This method is typically for neutral and hot wires. The ground wire should always be connected to the green screw terminal.

Image: A diagram illustrating both side wiring (using 12 or 14 AWG) and back push-in wiring (using 14 AWG only) methods for connecting hot, neutral, and ground wires to the receptacle.
- Side Wiring (12 or 14 AWG solid copper wire): Loosen the terminal screws. Wrap the stripped end of the wire clockwise around the appropriate screw terminal and tighten securely.
- Secure Outlet: Carefully fold the wires into the electrical box. Insert the new outlet into the wall box and secure it with the provided mounting screws.
- Sakinisha Ukuta: Attach the decorator wallplate over the installed outlet using the provided screws.
- Rejesha Nguvu: Turn the power back ON at the circuit breaker or fuse box. Test the outlet to ensure proper function.

Image: A BESTTEN decorator receptacle outlet with its wallplate installed in a modern living space, demonstrating its aesthetic integration.
6. Maagizo ya Uendeshaji
The BESTTEN 15 Amp Decorator Receptacle Outlet functions as a standard electrical outlet. Once properly installed and power is restored, it is ready for use.
- Insert a standard 2-prong or 3-prong electrical plug into the receptacle slots.
- Ensure the plug is fully inserted for a secure connection.
- Do not force plugs into the outlet.
- Avoid overloading the outlet by connecting too many high-power devices, as this can trip the circuit breaker or cause a fire hazard. Refer to the 15A/125V/1875W rating.

Image: A BESTTEN decorator receptacle outlet installed in a modern kitchen, highlighting its clean and simple design.
7. Matengenezo
These outlets are designed for durability and require minimal maintenance.
- Kusafisha: To clean the outlet and wallplate, first turn off power at the circuit breaker. Use a soft, damp cloth to wipe the surface. Do not use abrasive cleaners or solvents. Ensure the outlet is completely dry before restoring power.
- Ukaguzi: Periodically inspect outlets for any signs of damage, such as cracks, discoloration, or loose connections. If damage is observed, turn off power and replace the outlet.
8. Utatuzi wa shida
If you experience issues with your BESTTEN receptacle outlet, consider the following common troubleshooting steps:
- No Power to Outlet:
- Check the circuit breaker: Ensure the corresponding breaker is in the "ON" position. If it's tripped, reset it.
- Check for loose wiring: Turn off power at the breaker, remove the wallplate and outlet, and verify all wire connections are secure.
- Test with another device: Plug a known working device into the outlet to confirm the issue is with the outlet and not the device.
- Loose Plug Connection:
- If plugs feel loose, the internal contacts may be worn. The outlet should be replaced by a qualified individual.
- Outlet is Hot to the Touch:
- Immediately turn off power to the outlet at the circuit breaker. This could indicate an overload or a wiring issue. Consult a qualified electrician.
Ikiwa hatua za utatuzi hazitatui suala hilo, wasiliana na fundi umeme aliyehitimu.
9. Udhamini na Msaada
BESTTEN products are manufactured to high-quality standards. For warranty information or technical support, please refer to the official BESTTEN webtovuti au wasiliana na huduma kwa wateja wao moja kwa moja. Weka risiti yako ya ununuzi kama uthibitisho wa ununuzi.
Kwa msaada zaidi, tembelea BESTTEN Store on Amazon.





