Alto Professional TS310 Powered PA Spika Mwongozo wa Mtumiaji

Utangulizi

The Alto Professional TS310 is a 2000-watt 10-inch 2-way powered PA speaker designed for professional audio applications. This manual provides essential information for the safe and effective use of your TS310 speaker, covering setup, operation, maintenance, and troubleshooting.

The TS310 features a powerful 2000-watt peak (1000-watt continuous) amplifier, a 10-inch low-frequency driver, and a 1.4-inch horn-loaded high-frequency driver with a precision waveguide. It includes an integrated 2-channel mixer, comprehensive contour control, and various positioning options for versatile deployment.

Figure 1: Alto Professional TS310 Powered PA Speaker, front view.

Taarifa za Usalama

Before operating your TS310 speaker, please read and understand all safety instructions. Retain this manual for future reference.

Usalama wa Umeme: Always connect the speaker to a grounded power outlet. Do not defeat the safety purpose of the polarized or grounding-type plug.
Kamba ya Nguvu: Linda waya wa umeme dhidi ya kutembezwa au kubanwa, haswa kwenye plagi, vyombo vya kuhifadhia umeme, na mahali zinapotoka kwenye kifaa.
Maji na Unyevu: Do not use this apparatus near water. Do not expose to dripping or splashing.
Joto: Usisakinishe karibu na vyanzo vyovyote vya joto kama vile radiators, rejista za joto, jiko, au vifaa vingine (pamoja na amplifiers) zinazotoa joto.
Uingizaji hewa: Hakikisha uingizaji hewa sahihi. Usizuie fursa yoyote ya uingizaji hewa.
Kuhudumia: Rejelea huduma zote kwa wahudumu waliohitimu. Huduma inahitajika wakati kifaa kimeharibiwa kwa njia yoyote, kama vile kamba ya usambazaji wa umeme au plagi imeharibiwa, kioevu kimemwagika au vitu vimeanguka kwenye kifaa, kifaa kimeathiriwa na mvua au unyevu, haifanyi kazi kawaida. , au imetupwa.
Kusafisha: Safisha tu kwa kitambaa kavu.

Vipengele

The Alto Professional TS310 is engineered with advanced features for superior audio performance and versatility:

Pato la Nguvu ya Juu: 2000W peak (1300W LF + 700W HF) active PA speaker with precision crossover and high-efficiency Class D ampwaokoaji.
Optimized Drivers: Features a 10-inch (305 mm) LF driver with a 2.5-inch (76 mm) high-temperature voice coil and a 1.4-inch (35 mm) neodymium magnet HF driver with a precision waveguide.
Mchanganyiko uliojumuishwa: A 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs and independent level controls.
Muunganisho Unaobadilika: Includes an XLR Link output for connecting additional speakers.
Sound Shaping: Equipped with a Contour EQ switch for quick sound adjustments and a Ground-Lift switch to eliminate hum.
Uwekaji Mbadala: Lightweight cabinet design supports pole-mounting, wedge monitor positioning, bracket installation, or flown application with M6 suspension points.

Figure 2: Illustration of the 10-inch LF driver and 1.4-inch HF driver components.

Sanidi

Proper setup ensures optimal performance and safety of your TS310 speaker.

1. Uwekaji wa Kimwili

The TS310 offers multiple placement options:

Kuweka nguzo: Use a standard speaker pole stand. Ensure the stand is stable and rated for the speaker's weight.
Wedge Monitor: Position the speaker on its side for use as a floor monitor.
Ufungaji wa Mabano: Utilize M6 suspension points for fixed installations with appropriate brackets (sold separately).
Flown Application: For suspended installations, consult a qualified professional to ensure safe rigging.

Alto Professional TS310 mounting options: pole-mount, wedge, bracket

Figure 3: Various setup configurations including pole-mount, wedge monitor, and bracket installation.

2. Viunganishi

Rejelea mchoro wa paneli ya nyuma kwa sehemu za muunganisho:

Alto Professional TS310 rear panel with input and control labels

Figure 4: Rear panel controls and connections of the TS310.

Muunganisho wa Nishati: Connect the supplied power cable to the AC input on the rear panel and then to a grounded power outlet.
Audio Inputs (Input 1 & Input 2): Use XLR or 1/4-inch TRS cables to connect your audio sources (e.g., mixer, microphone, instrument) to the dual combo inputs.
Tokeo la Kiungo cha XLR: Use an XLR cable to connect this output to the input of another powered speaker (e.g., another TS310) to expand your PA system.

Uendeshaji

Follow these steps for basic operation of your TS310 speaker:

Washa: Ensure all connections are secure. Turn on your audio sources first, then turn on the TS310 using the Power switch on the rear panel.
Udhibiti wa Sauti: Adjust the independent Level controls for Input 1 and Input 2 to set the desired volume for each source. Start with lower volumes and gradually increase.
Contour EQ Switch: Engage this switch to apply a pre-set EQ curve that enhances bass and treble, often suitable for music playback. Disengage for a flatter frequency response, typically preferred for live vocals or instruments requiring precise mixing.
Ground-Lift Switch: If you experience hum or buzzing, try engaging the Ground-Lift switch. This can help eliminate ground loop noise.
Zima umeme: Before disconnecting power, turn off the TS310 first, then turn off your audio sources.

Matengenezo

Regular maintenance helps prolong the life of your TS310 speaker:

Kusafisha: Use a soft, dry cloth to clean the exterior of the speaker. Do not use solvents or abrasive cleaners.
Grille: Periodically check the front grille for dust or debris and gently clean if necessary to maintain optimal sound dispersion.
Hifadhi: When not in use, store the speaker in a dry, temperate environment, protected from dust and extreme temperatures.
Ukaguzi: Regularly inspect power cables and audio cables for any signs of damage. Replace damaged cables immediately.

Kutatua matatizo

Ukikumbana na matatizo na TS310 yako, rejelea matatizo na suluhisho zifuatazo za kawaida:

Tatizo	Sababu inayowezekana	Suluhisho
Hakuna nguvu	Power cable disconnected; Power outlet not active; Power switch off.	Ensure power cable is securely connected. Check power outlet with another device. Verify power switch is in the 'ON' position.
Hakuna sauti	Input level too low; Audio source not sending signal; Damaged audio cable; Mixer output level too low.	Increase Input Level controls. Check audio source. Test with a different audio cable. Ensure mixer/source output is active.
Sauti iliyopotoka	Input level too high (clipping); Speaker volume too high; Damaged driver.	Reduce Input Level controls. Lower the overall volume. If distortion persists at low volumes, contact support.
Hum au kelele ya buzzing	Ground loop; Interference from other electronics.	Engage the Ground-Lift switch. Try connecting the speaker to a different power circuit. Move speaker away from other electronic devices.

Vipimo

Detailed technical specifications for the Alto Professional TS310:

Mfano: TS310
Pato la Nguvu: 2000 Watts Peak (1300W LF + 700W HF)
Dereva wa LF: 10-inch (305 mm), 2.5-inch (76 mm) high-temperature voice coil
Dereva wa HF: 1.4-inch (35 mm) neodymium magnet with precision waveguide
Majibu ya Mara kwa mara: 1 kHz (Note: This value typically represents a specific test point or a simplified representation, not the full frequency range.)
Pembejeo za Sauti: 2 x XLR / 1/4-inch TRS combo inputs
Pato la Sauti: 1 x XLR Link output
Vidhibiti: Volume 1, Volume 2, Power switch, Contour EQ switch, Ground-Lift switch
Kupachika: Pole-mountable, wedge monitor, bracket installation, M6 suspension points
Vipimo (L x W x H): Inchi 20.6 x 11.8 x 12.6 (sentimita 52.3 x 30.0 x 32.0)
Uzito wa Kipengee: Pauni 26.4 (kilo 11.98)
Chanzo cha Nguvu: Umeme wa Cord
Rangi: Nyeusi
Mtengenezaji: inMusic Brands Inc
UPC: 816311011754

Udhamini na Msaada

For detailed warranty information, please refer to the Safety & Warranty Manual included with your product. For technical support or service inquiries, please visit the official Alto Professional webtovuti au wasiliana na idara yao ya huduma kwa wateja.

An electronic version of the user manual can be found hapa.

	Mwongozo wa Huduma za Mfululizo wa Alto CYCLONE: CYCLONE160/240/320 Mwongozo rasmi wa huduma kwa vichanganyaji vya sauti vya mfululizo wa Alto CYCLONE (CYCLONE160, CYCLONE240, CYCLONE320), unaoelezea vipimo, michoro, na sehemu za ukarabati na matengenezo.
	Alto MAC2.2/2.3/2.4 Mwongozo wa Huduma - Maelezo ya Kiufundi na Michoro Mwongozo wa kina wa huduma kwa Alto MAC2.2, MAC2.3, na stereo ya MAC2.4 amplifiers, ikijumuisha vipimo, michoro, michoro ya nyaya, na taratibu za majaribio.
	Mchanganyiko wa Operativo wa Manuale ALTO S-8: Mwongozo Kamilisha kwenye Kanali 8 Kichanganyaji cha Esplora il manuale operativo del ALTO S-8. Scopri installazione, connessioni, controlli, caratteristiche tecniche na specifiche per ottimizzare l'uso del tuo mixer audio professionale a 8 canali.
	Mwongozo wa Huduma ya Kikompresa/Kikomo cha Alto ACL2 PRO Mwongozo wa kina wa huduma kwa Alto ACL2 PRO Compressor/Limiter, vipimo vya kufunika, michoro ya vizuizi, michoro, mpangilio wa PCB, michoro ya nyaya, orodha za sehemu na maelezo ya utatuzi.
	Mwongozo wa Mtumiaji wa Dashibodi ya Mchanganyiko wa Alto S-12 12 Mwongozo huu wa mtumiaji unatoa maelezo ya kina juu ya Dashibodi ya Mchanganyiko ya Chaneli ya Alto S-12 12, inayojumuisha maelezo ya usalama, vipengele, vipengele vya udhibiti, usakinishaji, uunganisho wa nyaya, vipimo vya kiufundi na udhamini.
	Alto aMICTUBE Stereo Tube Preamp Mwongozo wa Huduma Mwongozo wa kina wa huduma kwa Alto aMICTUBE Stereo Tube Preamp, inayoangazia vipimo, michoro ya vizuizi, michoro ya michoro, mipangilio ya PCB, michoro ya nyaya, taratibu za majaribio, orodha za sehemu za umeme na kulipuka. views kwa ajili ya matengenezo na ukarabati.

ALTO TS310