Miongozo+

HILTI HDM 500

Hilti HDM 500 Manual Adhesive Dispenser

Model: HDM 500 (3498314)

Chapa: HILTI

1. Utangulizi

This manual provides essential instructions for the safe and effective use of the Hilti HDM 500 Manual Adhesive Dispenser. Designed for robust performance in demanding jobsite conditions, this dispenser is engineered for precise application of chemical anchors and other two-component adhesives. Please read this manual thoroughly before operation and retain it for future reference.

2. Taarifa za Usalama

Always adhere to general safety practices when operating power tools and handling chemical products. Failure to follow these instructions may result in injury or damage to the product.

  • Read Adhesive Instructions: Always consult the specific safety data sheet (SDS) and application instructions provided with your adhesive cartridges.
  • Vifaa vya Kinga vya Kibinafsi (PPE): Wear appropriate PPE, including safety glasses, gloves, and respiratory protection, as recommended by the adhesive manufacturer.
  • Uingizaji hewa: Ensure adequate ventilation in the work area to prevent inhalation of fumes.
  • Sehemu ya kazi salama: Ensure the workpiece is stable and secured before applying adhesive.
  • Weka Wazi: Keep hands and body parts clear of moving parts and the dispensing nozzle.

3. Bidhaa Imeishaview

The Hilti HDM 500 is a manual dispenser designed for two-component adhesive cartridges. It features a durable construction and is well-balanced for improved handling during application. The dispenser accommodates different cartridge sizes through interchangeable cartridge holders.

Hilti HDM 500 Manual Adhesive Dispenser with interchangeable red and black cartridge holders.
The Hilti HDM 500 manual adhesive dispenser, showcasing its robust design and the two interchangeable cartridge holders (red and black) for different adhesive types.

The dispenser set typically includes the HDM 500 gun and at least one cartridge holder (e.g., black for HIT-CB 500 cartridges). Additional cartridge holders (such as the red one) can be used for other compatible adhesive types.

Hilti HDM 500 Manual Adhesive Dispenser with the red cartridge holder installed.
Karibu-up view of the Hilti HDM 500 dispenser with the red cartridge holder in place, ready for use with compatible adhesive cartridges.
Hilti HDM 500 Manual Adhesive Dispenser with the black cartridge holder installed.
The Hilti HDM 500 dispenser featuring the black cartridge holder, designed for specific adhesive cartridge sizes.

4. Kuweka

Proper setup ensures optimal performance and safety. Follow these steps to prepare your Hilti HDM 500 dispenser for use:

  1. Select Cartridge Holder: Choose the appropriate cartridge holder (e.g., black or red) that matches the adhesive cartridge you intend to use.
  2. Retract Plunger: Pull back the plunger arm of the dispenser completely. This is typically done by pressing a release button or lever near the handle and pulling the rod back.
  3. Open Dispenser: Press the button located on the top of the dispenser to release and pivot the front part of the dispenser open. This allows access to the cartridge chamber.
  4. Insert Cartridge Holder: Place the selected cartridge holder into the dispenser, ensuring it clicks securely into position.
  5. Insert Adhesive Cartridge: Carefully slide the adhesive cartridge into the installed cartridge holder until it is fully seated.
  6. Attach Mixing Nozzle: Remove the cap from the adhesive cartridge and securely screw on the static mixing nozzle provided with the adhesive. Ensure it is tightened properly to prevent leaks and ensure proper mixing.

5. Maagizo ya Uendeshaji

Once the dispenser is set up with the adhesive cartridge and mixing nozzle, you can begin the application process:

  1. Purge Initial Material: Before applying to the actual workpiece, dispense a small amount of adhesive onto a scrap surface until a consistent, uniformly mixed color is observed. This ensures both components are properly mixed.
  2. Weka Adhesive: Position the mixing nozzle into the hole or area where the adhesive is to be applied. Squeeze the trigger repeatedly to dispense the adhesive. Maintain steady pressure for a continuous flow.
  3. Mtiririko wa Udhibiti: The amount of adhesive dispensed is controlled by the trigger. Release the trigger to stop the flow.
  4. Follow Adhesive Curing Times: Refer to the adhesive manufacturer's instructions for specific curing times and working temperatures.

6. Matengenezo

Regular maintenance will prolong the life of your Hilti HDM 500 dispenser:

  • Kusafisha: After each use, remove the adhesive cartridge and mixing nozzle. Clean any excess adhesive from the dispenser body, especially around the plunger and cartridge holder, using a suitable solvent if necessary (check adhesive manufacturer's recommendations).
  • Ukaguzi: Periodically inspect the dispenser for any signs of wear, damage, or loose components. Ensure the plunger mechanism operates smoothly.
  • Hifadhi: Store the dispenser in a clean, dry place, away from direct sunlight and extreme temperatures.

7. Utatuzi wa shida

If you encounter issues with your Hilti HDM 500 dispenser, consider the following:

  • Ugumu wa Kusambaza: Ensure the plunger arm is fully retracted before inserting the cartridge. Check that the cartridge is correctly seated in the holder and the mixing nozzle is securely attached and not clogged.
  • Cartridge Not Fitting: Verify that you are using the correct cartridge holder for your specific adhesive cartridge size.
  • Uneven Mixing: Ensure the mixing nozzle is properly attached and that the initial purge of adhesive was sufficient to achieve a consistent mix.

Kwa matatizo yanayoendelea, wasiliana na huduma kwa wateja wa Hilti au fundi wa huduma aliyehitimu.

8. Vipimo

VipimoMaelezo
Nambari ya Mfano3498314 (HDM 500)
ChapaHILTI
Hali ya UendeshajiMwongozo
Chanzo cha NguvuMwongozo
Ukubwa wa Msingi500 mm
Vipimo vya KifurushiInchi 16.3 x 8.98 x 5.24
Uzito wa KipengeePauni 5.42

9. Udhamini na Msaada

This product is a genuine HILTI item. However, as a parallel import, it may differ in included accessories, packaging design, user manuals, and warranty coverage compared to products officially distributed in the United States. Consequently, this product may not be eligible for direct manufacturer warranty coverage or customer support within the United States.

For support inquiries, please refer to the seller or distributor from whom the product was purchased.

Nyaraka Zinazohusiana - HDM 500

Kablaview Chokaa cha Sindano cha Hilti HIT-RE500 chenye Rebar ya Daraja la 500: Mwongozo wa Data ya Kiufundi na Matumizi
Hati kamili ya kiufundi ya chokaa cha sindano cha Hilti HIT-RE500 chenye upau wa Daraja la 500, kinachoshughulikia vipimo vya bidhaa, mbinu za matumizi, data ya usalama, na ripoti za utendaji kwa wataalamu wa ujenzi.
Kablaview Hilti HIT-HY 170: Mfumo wa Kutia Washikamani wa Universal
Gundua Hilti HIT-HY 170, mfumo wa kushikilia wa wambiso wa utendaji wa juu wa ulimwengu wote ulioundwa kwa urekebishaji wa kuaminika na wa aina nyingi katika saruji na aina mbalimbali za uashi. Jifunze kuhusu matumizi yake, usalama, na vipimo vyake vya kiufundi.
Kablaview Hilti HIT-HY 200-A V3 Maagizo ya Uendeshaji ya Adhesive Anchoring System
Maagizo ya kina ya uendeshaji na vipimo vya kiufundi kwa ajili ya mfumo wa kuambatisha wa Hilti HIT-HY 200-A V3, unaofafanua usakinishaji, tahadhari za usalama na matumizi ya bidhaa katika lugha nyingi.
Kablaview Hilti Anchor Systems Catalog
A comprehensive guide to Hilti's anchor systems, detailing adhesive and mechanical anchors, their applications, features, and product approvals. Includes information on Hilti's design software and installation best practices.
Kablaview Hilti HIT-RE 500 V3 1400 Jumbo Adhesive Anchoring System Mwongozo wa Ufungaji
Mwongozo rasmi wa usakinishaji wa mfumo wa adhesive wa Hilti HIT-RE 500 V3 1400 Jumbo. Inajumuisha maagizo ya kina, maonyo ya usalama, vipimo vya kiufundi na miongozo ya matumizi ya kitaalamu katika saruji.
Kablaview Maagizo ya Uendeshaji ya Hilti HIT-HY 200-A V3 na Data ya Kiufundi
Maagizo kamili ya uendeshaji na data ya kiufundi kwa ajili ya mfumo wa chokaa cha gundi cha Hilti HIT-HY 200-A V3, maelezo ya matumizi, usalama, na vipimo vya utendaji kwa ajili ya kutia nanga kwa zege.