Mwongozo wa Maelekezo wa Adapta ya Kupachika Viatu Baridi ya SmallRig (Model 2060)

1. Utangulizi

This instruction manual provides detailed information for the proper installation and use of your SmallRig Cold Shoe Mount Adapter (Model 2060). This adapter is designed to expand the mounting capabilities of your camera setup, allowing you to attach various accessories such as microphones, flashes, and LED lights to camera cages, handles, or plates.

2. Yaliyomo kwenye Kifurushi

Tafadhali thibitisha kuwa bidhaa zote zilizoorodheshwa hapa chini zimejumuishwa kwenye kifurushi chako:

2 x SmallRig Cold Shoe Mount Adapters
2 x 1/4"-20 Screws
Screws 4 x M2.5
2 x Hex Spanners

SmallRig Cold Shoe Mount Adapter package contents

Image 2.1: Contents of the SmallRig Cold Shoe Mount Adapter package, including two cold shoe mounts, various screws, and hex spanners.

3. Kuweka na Kuweka

The SmallRig Cold Shoe Mount Adapter can be securely attached to any camera accessory featuring 1/4"-20 or M2.5 threaded holes.

3.1 Identifying Mounting Points

The cold shoe mount features both 1/4"-20 and M2.5 threaded holes on its base for attachment.

SmallRig Cold Shoe Mount Adapter showing 1/4-20 and M2.5 threads

Picha ya 3.1: Nyuma view of the cold shoe mount adapter, highlighting the 1/4"-20 and M2.5 threaded attachment points.

3.2 Utaratibu wa Kuunganisha

Identify the desired mounting location on your camera cage, handle, or plate. Ensure it has either a 1/4"-20 or M2.5 threaded hole.
Align the corresponding threaded hole on the cold shoe mount with the mounting point on your accessory.
Insert the appropriate screw (1/4"-20 or M2.5) and tighten it using the provided hex spanner until secure.
Kumbuka: For most camera cages, including those compatible with Sony ZV-E10, a6500, a6300, a6700, the 1/4"-20 screw is typically used. The M2.5 screws are generally for specific SmallRig accessories or when additional stability is required. For SmallRig Full Cage 1661, only the 1/4"-20 screw is needed.

SmallRig Cold Shoe Mount Adapter being attached to a camera cage

Image 3.2: Illustration of the cold shoe mount adapter being attached to a camera cage.

4. Maagizo ya Uendeshaji

Once the cold shoe mount adapter is securely installed, you can attach various accessories.

4.1 Kuambatanisha Vifaa

Slide your accessory (e.g., microphone, flash, LED light) into the cold shoe slot.
Ensure the accessory is fully seated. The cold shoe mount features two secure bending bevels on one end to prevent accidental removal.
The white arrows on the surface indicate the recommended direction for sliding accessories for optimal security.

SmallRig Cold Shoe Mount Adapter with anti-off design and directional arrows

Image 4.1: Close-up of the cold shoe mount adapter, showing the anti-off bending bevels and white directional arrows for accessory mounting.

Camera setup with SmallRig Cold Shoe Mount Adapter holding a microphone

Picha 4.2: Kutample of the cold shoe mount adapter in use, supporting an external microphone on a camera rig.

4.2 Utangamano

This cold shoe mount is compatible with a wide range of camera accessories that utilize a standard cold shoe connection. Examples ni pamoja na:

Maikrofoni
Taa za LED
External Flashes
Small monitors (with appropriate cold shoe adapter)
Magic Arms (with cold shoe base)
Cold Shoe Handles

SmallRig Cold Shoe Mount Adapter compatible with various camera accessories

Image 4.3: Visual representation of the cold shoe mount adapter's compatibility with different camera accessories such as cages, LED lights, magic arms, cold shoe handles, and monitor mounts.

5. Matengenezo

To ensure the longevity and optimal performance of your SmallRig Cold Shoe Mount Adapter, follow these simple maintenance guidelines:

Keep the mount clean and free from dust and debris. Use a soft, dry cloth for cleaning.
Avoid exposing the mount to extreme temperatures or corrosive substances.
Periodically check the tightness of the mounting screws to ensure a secure connection.

6. Utatuzi wa shida

6.1 Accessory Not Fitting Securely

Ensure the accessory has a standard cold shoe base.
Verify that the accessory is slid fully into the mount, past the anti-off bevels.
Some accessories may have a locking mechanism that needs to be tightened after insertion.

6.2 Mount Not Attaching to Camera Accessory

Confirm that your camera accessory has 1/4"-20 or M2.5 threaded holes.
Ensure you are using the correct screw size (1/4"-20 or M2.5) for the threaded hole.
Tighten the screw firmly with the hex spanner.

6.3 Compatibility Limitations

This Cold Shoe Mount is HAPANA suitable for DJI gimbals and HAPANA for ZHIYUN gimbals.

7. Vipimo

Mfano	2060
Nyenzo	Aloi ya Alumini
Vipimo (L x W x H)	25mm x 25mm x 9mm (0.98" x 0.98" x 0.35")
Uzito wa Bidhaa (kwa kila kipande)	Wakia 0.317 (takriban 9g)
Aina ya Kuweka	1/4"-20 Thread, M2.5 Thread
Utangamano	Standard cold shoe accessories, camera cages with 1/4"-20 or M2.5 threads

SmallRig Cold Shoe Mount Adapter held in hand for size reference

Image 7.1: The compact size of the SmallRig Cold Shoe Mount Adapter, shown held in a hand.

8. Udhamini na Msaada

For warranty information or technical support, please refer to the official SmallRig webtovuti au wasiliana na huduma kwa wateja wao moja kwa moja. Weka risiti yako ya ununuzi kama dhibitisho la ununuzi kwa madai yoyote ya udhamini.

SmallRig Rasmi Webtovuti: www.smallrig.com

	Kiatu Kidogo cha SmallRig cha Baridi hadi Adapta ya Skurubu ya 1/4"-20 3577 - Maelekezo ya Uendeshaji Maagizo ya kina ya uendeshaji na taarifa za bidhaa kwa ajili ya Adapta ya Screw ya SmallRig Mini Cold Shoe 3577 yenye ukubwa wa 1/4"-20. Jifunze kuhusu vipengele vyake, miongozo ya usalama, utangamano, na vipimo vya kupanua usanidi wa kamera kwa kutumia taa za kujaza na vifaa.
	Kizimba cha SmallRig kwa Maelekezo ya Uendeshaji wa Insta360 X5 Maagizo ya uendeshaji wa SmallRig Cage iliyoundwa kwa ajili ya kamera ya Insta360 X5. Mwongozo huu unaelezea vipengele, vipimo, na mchakato wa kuunganisha bidhaa, ukionyesha uwezo wake wa kinga na chaguo za kupachika vifaa vya ziada.
	Kipini cha Juu cha SmallRig 3764 chenye Kiatu Baridi (Kidogo) - Maelekezo ya Uendeshaji na Vipimo Pata maelekezo ya kina ya uendeshaji na vipimo vya Kipini cha Juu cha SmallRig 3764 chenye Kiatu Baridi (Lite). Jifunze kuhusu muundo wake wa ergonomic, sehemu nyingi za kupachika (kiatu baridi, ARRI, 1/4-20), miongozo ya usalama, na utangamano wa usanidi wa kamera za kitaalamu.
	Usaidizi wa SmallRig na Kifaa cha Kuweka Viatu Baridi kwa Simu - Maelekezo ya Uendeshaji Maagizo rasmi ya uendeshaji na vipimo vya SmallRig Support yenye Cold Shoe Mount, iliyoundwa kwa ajili ya simu mahiri. Inajumuisha maelezo ya bidhaa, yaliyomo kwenye kifurushi, na taarifa za mtengenezaji.
	SmallRig ARRI Kutafuta Kipini cha Juu (Kidogo) - Maelekezo ya Uendeshaji Maagizo ya uendeshaji wa SmallRig ARRI Locating Top Handle (Tiny), yanayoelezea usakinishaji wa mbele na nyuma, maonyo ya usalama, na vipimo vya kiufundi vya urekebishaji wa kamera.
	Cl yenye Umbo la Kaa Ndogoamp na Mkono wa Uchawi wenye Kiatu Baridi (inchi 11) - Maagizo ya Uendeshaji Maagizo kamili ya uendeshaji na maelezo ya bidhaa kwa SmallRig Crab-Shaped Clamp na Mkono wa Uchawi wenye Kiatu Baridi (inchi 11), modeli 3726. Jifunze kuhusu muundo wake wa aloi ya alumini imara, chaguzi za kupachika zenye matumizi mengi, miongozo ya usalama, na vipimo vya upigaji picha na video.

SMALLRIG 2060