Mwongozo wa Mtumiaji wa Taa ya Mkia ya Baiskeli ya ANTUSI A6 Akili

1. Utangulizi

Thank you for choosing the ANTUSI A6 Intelligent Bike Tail Light. This device combines a powerful rear bicycle light with an advanced anti-theft alarm system, a wireless bell, and a remote control for convenient operation. Designed for enhanced safety and security, the A6 model is waterproof and USB rechargeable, making it an ideal accessory for any cyclist.

Sifa Muhimu:

• Intelligent COB LED Tail Light
• Wireless Anti-Theft Alarm (up to 120dB)
• Operesheni ya Udhibiti wa Mbali
• Wireless Bicycle Bell Function
• Betri ya USB Inayoweza Kuchajiwa (850mAh)
• Ukadiriaji wa IP67 usio na maji
• RF (433MHz) Bicycle Finding Function (up to 100M)

Yaliyomo kwenye Kifurushi:

• ANTUSI A6 Tail Light Unit
• Udhibiti wa Kijijini
• Kebo ya Kuchaji ya USB
• Seat Mount Bracket and Accessories
• Mwongozo wa Mtumiaji (hati hii)

2. Bidhaa Imeishaview

Familiarize yourself with the components of your ANTUSI A6 device.

Figure 2.1: ANTUSI A6 Tail Light and Remote Control Components

• Vifungo vya Udhibiti wa Kijijini:
• Lock Button: Arm the alarm.
• Unlock Button: Disarm the alarm.
• Lightning Bolt Button: Mode switch for tail light.
• Bell Button: Activate wireless bell.
• Tail Light Components:
• USB Jack: For charging.
• Tail Light Button: Manual control for tail light.
• Tail Light Screw Deduction: Mounting point.
• Mkia Lamp Base: Mounting bracket.

3. Kuweka na Kuweka

3.1 Kuchaji Taa ya Mkia

Before first use, fully charge the tail light. Connect the provided USB charging cable to the USB jack on the tail light and to a standard USB power adapter (not included). The charging indicator will show the charging status (e.g., red for charging, green for fully charged). A full charge typically takes 2-3 hours.

3.2 Kuweka Taa ya Mkia

1. Attach the tail lamp base to the underside of your bicycle seat using the provided screws and accessories. Ensure it is securely fastened.
2. Slide the ANTUSI A6 tail light unit onto the mounted base until it clicks into place. Ensure the tail light is firmly attached and facing rearward.

Figure 3.1: Tail Light Mounted on Bicycle Seat

The tail light is designed for seat mount installation and features IP67 waterproofing and USB charging capabilities.

4. Maagizo ya Uendeshaji

4.1 Tail Light Operation

• Udhibiti wa Mwongozo: Press the Tail Light Button on the device to cycle through different lighting modes (e.g., steady, flashing, pulse) or to turn the light off.
• Udhibiti wa Mbali: Press the Lightning Bolt Button on the remote control to cycle through the tail light modes.

4.2 Anti-Theft Alarm

• Kuweka Alarm: Bonyeza kwa Kitufe cha Kufunga on the remote control. The tail light will emit a confirmation sound, indicating the alarm is armed. Any vibration or movement detected will trigger a loud alarm (up to 120dB).
• Kuzima Kengele: Bonyeza kwa Kitufe cha Kufungua on the remote control. The tail light will emit a confirmation sound, indicating the alarm is disarmed.

Figure 4.1: Arming the Anti-Theft Alarm

The alarm can be armed with a single press of the lock button on the remote, providing a high-decibel deterrent against theft.

4.3 Wireless Bell Function

Bonyeza kwa Kitufe cha Kengele on the remote control to activate the wireless bell sound. This can be used to alert pedestrians or other cyclists.

4.4 Bicycle Finding Function (RF 433MHz)

In dark environments or crowded areas, you can use the remote control to locate your bicycle. Press the Kitufe cha Kufunga (or a specific finding button if available, otherwise the lock button often doubles) on the remote. The tail light will emit a sound, helping you pinpoint your bike's location up to a measured maximum distance of 100 meters.

Figure 4.2: Using the Bicycle Finding Function

The RF 433MHz technology allows you to locate your bike from up to 100 meters away by triggering an audible signal from the tail light.

5. Matengenezo

• Kusafisha: Futa taa ya nyuma na kidhibiti cha mbali kwa kutumia kidhibiti laini, damp kitambaa. Usitumie kemikali kali au visafishaji vya abrasive.
• Inachaji: Recharge the tail light regularly, especially if it has not been used for an extended period, to maintain battery health.
• Upinzani wa Maji: The device has an IP67 waterproof rating, meaning it is protected from dust and can withstand immersion in water up to 1 meter for 30 minutes. However, avoid prolonged submersion and ensure the USB port cover is securely closed.
• Hifadhi: Hifadhi kifaa mahali pa baridi, kavu wakati haitumiki.

6. Utatuzi wa shida

• Tail Light Not Turning On: Ensure the device is fully charged. Press the tail light button or the remote's lightning bolt button.
• Alarm Not Responding to Remote: Check the remote control's battery. Ensure you are within the effective range (approx. 100M). Re-pair the remote if necessary (refer to manufacturer's specific pairing instructions, if not provided, assume factory paired).
• Alarm Triggering Randomly: The alarm sensitivity might be too high. Ensure the bike is stable when armed.
• Masuala ya Kuchaji: Verify the USB cable and power adapter are working correctly. Ensure the USB port on the tail light is clean and free of debris.

7. Vipimo

8. Udhamini na Msaada

For warranty information or technical support, please contact ANTUSI customer service through the retailer where you purchased the product or visit the official ANTUSI webtovuti. Tafadhali hifadhi uthibitisho wako wa ununuzi kwa madai ya udhamini.