Miongozo+

Sharp MX-7500N

Mwongozo wa Mtumiaji wa Printa ya Uzalishaji wa Laser ya Rangi ya Sharp MX-7500N

Model: MX-7500N

1. Utangulizi

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of the Sharp MX-7500N Color Laser Production Printer. Designed for high-volume document needs, this device offers advanced copying, printing, and scanning capabilities at speeds up to 75 pages per minute (PPM) in both color and black-and-white.

Key features include a built-in multi-processor controller with Adobe PostScript 3 support, a standard paper capacity of 3,100 sheets (expandable to 13,500 sheets with optional trays), and support for media sizes from A5 to A3+ (including 13" x 19"). The printer is equipped with a 5 GB standard memory and a 1 TB hard disk.

2. Kuweka

2.1 Kufungua na Kuweka

The Sharp MX-7500N is a substantial piece of equipment, weighing approximately 490 pounds (222 kg) and measuring 33.3 x 33.3 x 48 inches (84.6 x 84.6 x 121.9 cm). Due to its weight and size, professional assistance is recommended for unpacking and placement. Ensure the printer is placed on a sturdy, level surface in a well-ventilated area, with adequate space around it for operation and maintenance access.

Sharp MX-7500N Color Laser Production Printer, front view

Kielelezo cha 1: Mbele view of the Sharp MX-7500N Color Laser Production Printer, showing the main unit, paper trays, and the large touchscreen control panel mounted above.

Uunganisho wa Nguvu 2.2

Connect the provided power cord to the printer's power inlet and then to a grounded electrical outlet. Ensure the power supply meets the printer's requirements. Do not use extension cords or power strips that are not rated for the printer's power consumption.

Uunganisho wa Mtandao

The MX-7500N connects to a network via Ethernet. Locate the Ethernet port on the rear of the printer and connect it to your network using a standard Ethernet cable. Configure network settings (IP address, subnet mask, gateway) through the printer's control panel or a web interface, as guided by your network administrator.

2.4 Upakiaji wa Karatasi

The printer comes standard with two paper trays and a tandem tray, providing a total input capacity of 3,100 sheets. Additional optional trays can expand capacity to 13,500 sheets. Supported paper sizes include 5½" x 8½", 8½" x 11", 8½" x 11" R, 8½" x 14", 11" x 17", 12" x 18", and 13" x 19".

  1. Open the desired paper tray.
  2. Adjust the paper guides to match the size of the paper being loaded.
  3. Load the paper stack, ensuring it does not exceed the maximum fill line.
  4. Funga tray ya karatasi kwa usalama.
  5. Confirm the paper type and size on the control panel if prompted.

3. Kuendesha Kichapishi

The Sharp MX-7500N features an intuitive touchscreen control panel for managing all functions. The interface allows for easy navigation between copying, printing, and scanning operations.

Close-up of Sharp MX-7500N control panel and document feeder

Kielelezo cha 2: Karibu-up view of the Sharp MX-7500N's large touchscreen control panel displaying various function icons, and the automatic document feeder on top of the printer unit.

3.1 Copy Function

  1. Place your original document(s) on the document glass or in the automatic document feeder (DSPF).
  2. On the control panel, select the "Copy" icon.
  3. Adjust settings such as quantity, color mode (color/black-and-white), zoom, paper selection, and duplex options.
  4. Bonyeza kitufe cha "Anza" ili kuanza kunakili.

3.2 Print Function

To print from a computer, ensure the printer drivers are installed. The MX-7500N supports Adobe PostScript 3. Print jobs can be sent from various applications on your network-connected devices.

  1. From your computer application, select "Print".
  2. Choose the Sharp MX-7500N from the list of available printers.
  3. Adjust print settings (e.g., number of copies, paper source, color/mono, duplex) as needed.
  4. Confirm and send the print job. The printer will process and output at up to 75 PPM.

3.3 Kazi ya Kuchanganua

The printer allows scanning documents to various destinations, including email, network folders, or directly to the printer's hard disk (Scan to HDD).

  1. Place your original document(s) on the document glass or in the automatic document feeder.
  2. On the control panel, select the "Scan" icon.
  3. Choose your desired scan destination (e.g., Scan to Email, Scan to Folder, Scan to HDD).
  4. Sanidi mipangilio ya uchanganuzi kama vile ubora, file format (e.g., PDF, JPEG), and color mode.
  5. Bonyeza kitufe cha "Anza" ili kuanzisha uchanganuzi.

4. Matengenezo

Regular maintenance ensures optimal performance and extends the lifespan of your Sharp MX-7500N printer. Always power off and unplug the printer before performing any internal maintenance.

4.1 Consumables Replacement

The printer uses toner cartridges and other consumables (e.g., developer units, drums) that will need periodic replacement. The control panel will display alerts when consumables are low or need to be replaced. When the unit ships, it typically includes an average of 30% consumables, so plan for replacements as needed.

  1. Follow the on-screen instructions on the control panel for specific consumable replacement procedures.
  2. Use only genuine Sharp replacement parts to ensure compatibility and performance.
  3. Dispose of used consumables according to local regulations.

4.2 Taratibu za Kusafisha

Regular cleaning helps maintain print quality and prevents paper jams.

  • Nje: Futa nyuso za nje kwa laini, damp, kitambaa kisicho na rangi. Usitumie visafishaji au viyeyusho vya kukwaruza.
  • Kioo cha Hati: Clean the document glass with a soft cloth and a non-abrasive glass cleaner to ensure clear scans and copies.
  • Automatic Document Feeder (DSPF): Gently wipe the rollers and guides within the DSPF to remove dust and paper residue.

5. Utatuzi wa shida

This section addresses common issues you might encounter with your Sharp MX-7500N printer. For more complex problems, refer to the detailed service manual or contact technical support.

5.1 Jamu za Karatasi

  • Dalili: Printer stops, error message indicates a paper jam.
  • Suluhisho: Open the indicated covers or trays. Carefully remove any jammed paper, pulling in the direction of the paper path. Ensure no torn pieces remain. Close all covers securely.

5.2 Ubora duni wa Uchapishaji

  • Dalili: Faded prints, streaks, spots, or incorrect colors.
  • Suluhisho:
    • Angalia viwango vya toner na ubadilishe katriji zozote za chini.
    • Perform a print quality calibration from the control panel settings.
    • Clean the document glass and other optical components.
    • Hakikisha unatumia aina sahihi za karatasi kwa kazi yako ya uchapishaji.

5.3 Masuala ya Muunganisho

  • Dalili: Printer is offline, cannot send print jobs, or network functions are unavailable.
  • Suluhisho:
    • Verify the Ethernet cable is securely connected to both the printer and the network port.
    • Check network settings on the printer's control panel to ensure correct IP address configuration.
    • Anzisha upya kichapishi na kipanga njia/swichi cha mtandao wako.
    • Ensure printer drivers are correctly installed and updated on your computer.

6. Vipimo

KipengeleMaelezo
Jina la MfanoMX-7500N
KaziNakili, Chapisha, Changanua
Teknolojia ya UchapishajiLaser ya rangi
Print Speed (Color/Monochrome)75 pages per minute (PPM)
Uwezo wa Kawaida wa Kuingiza Karatasi3,100 sheets (2 Trays + Tandem Tray)
Uwezo wa Juu Zaidi wa Kuingiza KaratasiKaratasi 13,500 (pamoja na trei za hiari)
Saizi za Karatasi Zinazotumika5½" x 8½", 8½" x 11", 8½" x 11" R, 8½" x 14", 11" x 17", 12" x 18", 13" x 19"
Teknolojia ya UunganishoEthaneti
Kumbukumbu5 GB Standard
Hifadhi ya Diski Ngumu1 TB
Vipimo vya Bidhaa (W x D x H)Inchi 33.3 x 33.3 x 48 (sentimita 84.6 x 84.6 x 121.9)
Uzito wa KipengeePauni 490 (kilo 222)
Njia ya KudhibitiRemote (via network) / Touchscreen Panel
UPC747565508427

7. Udhamini na Msaada

7.1 Taarifa ya Udhamini

This Sharp MX-7500N unit comes with a Dhamana ya Vipuri vya Siku 30. This warranty covers defects in materials and workmanship for specified parts for a period of 30 days from the date of purchase. Please retain your proof of purchase for warranty claims.

Note: This machine is refurbished and fully tested by certified technicians. The warranty applies to parts only.

7.2 Msaada wa Kiufundi

For technical assistance, service requests, or inquiries beyond the scope of this manual, please contact your authorized Sharp dealer or service provider. Have your model number (MX-7500N) and serial number ready when contacting support.

Nyaraka Zinazohusiana - MX-7500N

Kablaview SHARP MX-C303/MX-C304 Series User's Manual
User's manual for SHARP MX-C303, MX-C303W, MX-C303WH, MX-C304, MX-C304W, MX-C304WH Digital Full Colour Multifunctional Systems. Covers operation, features, setup, and maintenance.
Kablaview Mwongozo Kali wa Usalama kwa Mifumo na Vichapishi Vinavyofanya Kazi Nyingi
Miongozo muhimu ya usalama na tahadhari kwa mifumo na vichapishi vya Sharp dijitali vyenye utendaji mwingi, ikiwa ni pamoja na mifumo kama MX-C357F, MX-C428F, MX-C557F, MX-C607F, MX-C407P, MX-C528P, MX-C607P, MX-B557F, MX-B707F, MX-B427W, MX-B467F, MX-B557P, MX-B707P, MX-B427PW, MX-B467P. Inashughulikia taarifa za umeme, leza, usalama wa ozoni, na uzingatiaji wa sheria.
Kablaview Mwongozo wa Usalama wa Mifumo na Vichapishaji vikali vya Mifumo na Vichapishaji
Mwongozo wa kina wa usalama na vipimo vya kiufundi vya Sharp DIGITAL FULL COLOR MULTIFUNCTIONAL SYSTEMS na PRINTERS, na DIGITAL MULTIFUNCTIONAL SYSTEMS na LASER PRINTERS, ikiwa ni pamoja na namba za mfano MX-C357F, MX-C407F, MX-C507F, MX-C507F, MX7FMX, 7FMX-C5F, MX-C5, MX-C5, MX-507F, MX-507F, MX-7F5-C5F MX-C407P, MX-C507P, MX-C607P, MX-B557F, MX-B707F, MX-B427W, MX-B467F, MX-B557P, MX-B707P, MX-B427PW, MX-B46 Inashughulikia tahadhari za usalama, mahitaji ya nguvu, vipimo vya leza, kufuata FCC, na utupaji.
Kablaview Mwongozo Mkali wa Mfumo wa Utendakazi Mbalimbali na Mwongozo wa Usalama wa Kichapishi
Mwongozo wa usalama wa Sharp DIGITAL FULL COLOR MULTIFUNCTIONAL SYSTEMS na PRINTERS, na DIGITAL MULTIFUNCTIONAL SYSTEMS na LASER PRINTERS, inayofunika usalama wa umeme, usalama wa leza, mazingira ya uendeshaji, na uzingatiaji wa kanuni.
Kablaview Mwongozo wa Kutatua Matatizo ya Printa ya SHARP Multifunction
Mwongozo huu kamili kutoka SHARP hutoa suluhisho kwa matatizo ya kawaida yanayokumbana na vichapishaji vyao vya utendaji kazi mwingi, ikiwa ni pamoja na matatizo ya kunakili, kuchapisha, kutuma faksi, kutuma picha, na kuhifadhi hati. Unatoa orodha za ukaguzi za kina na maagizo ya hatua kwa hatua ili kuwasaidia watumiaji kutatua changamoto za uendeshaji.
Kablaview Mwongozo wa Mtumiaji wa Printa ya Laser ya Sharp MX-B557P/MX-B707P
Mwongozo kamili wa mtumiaji wa vichapishi vya leza vya Sharp MX-B557P na MX-B707P, unaohusu usanidi, uendeshaji, utunzaji wa karatasi, uchapishaji, matengenezo, usalama, na utatuzi wa matatizo.