Miongozo+

TOPGREENER TSOS5-W

Mwongozo wa Maelekezo ya Kubadilisha Mwangaza wa Kihisi cha Mwendo cha PIR cha Ndani ya Ukutani cha TOPGREENER TSOS5-W

1. Utangulizi

This manual provides comprehensive instructions for the installation, operation, and maintenance of the TOPGREENER TSOS5-W In-Wall PIR Motion Sensor Light Switch. This device is designed to automatically control lighting, fans, and motors by detecting occupancy and vacancy in a room, offering both convenience and energy efficiency.

Tafadhali soma mwongozo huu kwa makini kabla ya kusakinisha na kutumia ili kuhakikisha utendakazi sahihi na usalama.

2. Taarifa za Usalama

ONYO: HATARI YA MSHTUKO WA UMEME.

Improper installation can result in serious injury or death. Always turn off power at the circuit breaker before beginning any electrical work. Consult a qualified electrician if you are unsure about any part of the installation process or if your wiring does not match the descriptions provided.

  • This device requires a neutral wire for operation. Verify that a neutral wire is present in your electrical box before installation.
  • This switch is for single-pole applications only. It is not compatible with 3-way or multi-way circuits.
  • Do not exceed the maximum load ratings: 4 Amps, 500W.
  • Hakikisha miunganisho yote ya waya ni salama na imewekewa maboksi ipasavyo.
  • Kwa matumizi ya ndani tu.

3. Yaliyomo kwenye Kifurushi

Thibitisha kuwa vipengee vyote vipo kwenye kifurushi:

  • TOPGREENER TSOS5-W Motion Sensor Light Switch
  • Karanga za waya
  • Mwongozo wa Maagizo
  • Bamba la Ukuta
Two TOPGREENER TSOS5-W motion sensor light switches with wall plates.

This image displays two TOPGREENER TSOS5-W in-wall PIR motion sensor light switches, each with a white wall plate. The switches feature a slider for OFF, AUTO, and ON modes, and a small dial for adjustments.

4. Vipimo

Nambari ya MfanoTSOS5-W
Hali ya UendeshajiAutomatic, Off
Ukadiriaji wa Sasa4 Amps
Uendeshaji Voltage120 Volts
Aina ya MawasilianoKawaida Fungua
Aina ya kiunganishiVituo vya Parafujo
KituoSPST (Urushaji Mmoja wa Pole Moja)
Aina ya Mzunguko1-njia
Aina ya KitendajiPush Button / Slider
Vipimo vya Bidhaa (L x W x H)Inchi 1.72 x 1.46 x 2.73
Max Sensor Coverage Area980 sq ft, 180° Field of View
Adjustable Range/Sensitivity30% hadi 100%
Variable Time Delay15 sec (test mode), 10 min, 20 min, 30 min
VyetiUL Imeorodheshwa

5. Ufungaji

Kabla ya kuanza: Turn OFF power at the circuit breaker or fuse box. Ensure the power is completely off before proceeding.

  1. Zima Nguvu: Locate the circuit breaker controlling the switch you are replacing and turn it off. Verify power is off using a voltagjaribu.
  2. Ondoa Switch ya Kale: Unscrew and carefully pull the old switch from the wall box. Disconnect the wires from the old switch.
  3. Tambua Waya: You should have the following wires in your electrical box:
    • Line Wire (Hot): Kawaida huwa nyeusi, ikitoka kwenye kivunja mzunguko.
    • Pakia Waya: Kawaida nyeusi, ikienda kwenye taa au kifaa cha kuotea.
    • Waya wa Neutral: Kawaida nyeupe. This switch requires a neutral wire.
    • Waya wa Ardhi: Usually bare copper or green.
  4. Unganisha Swichi Mpya: Use the provided wire nuts to connect the wires from the wall box to the corresponding wires on the TOPGREENER TSOS5-W switch. Refer to the wiring diagram below.
    • Unganisha Mstari wire from the wall box to the Mstari wire on the switch.
    • Unganisha Mzigo wire from the wall box to the Mzigo wire on the switch.
    • Unganisha Si upande wowote wire from the wall box to the Si upande wowote wire on the switch.
    • Unganisha Ardhi wire from the wall box to the Ardhi wire on the switch.
  5. Swichi ya Kuweka: Carefully push the wired switch back into the wall box. Secure it with the mounting screws. Attach the wall plate.
  6. Rejesha Nguvu: Washa umeme tena kwenye kivunja mzunguko.
Internal components and features of the TOPGREENER motion sensor switch.

An internal diagram of the TOPGREENER motion sensor switch, highlighting its key components and features such as the precision PIR sensor, customizable controls, daylight detection, fault tolerance, and fire-resistant construction. This image also implies the wiring connections.

6. Uendeshaji

The TOPGREENER TSOS5-W switch features a slider control with three main modes: OFF, AUTO, and ON.

  • Njia ya KUZIMA: When the slider is in the OFF position, the connected lights or appliance will remain off, regardless of motion detection. This acts as a manual override to keep the load off.
  • AUTO Mode (Occupancy Sensor): When the slider is in the AUTO position, the switch functions as an occupancy sensor. It will automatically turn the lights/appliance ON when motion is detected and turn them OFF after a set time delay when no motion is detected.
  • ON Modi: When the slider is in the ON position, the connected lights or appliance will remain on continuously, regardless of motion detection. This acts as a manual override to keep the load on.
Finger operating the manual ON/OFF slider on the TOPGREENER motion sensor switch.

This image demonstrates the manual ON/OFF override feature of the TOPGREENER motion sensor switch, allowing users to switch between OFF, AUTO (sensor-controlled), and ON modes as needed.

TOPGREENER motion sensor switch set to OFF mode in a meeting room.

The TOPGREENER motion sensor switch is shown in the 'OFF' position, indicating that the lights will remain off regardless of motion, suitable for situations where manual control is preferred.

7. Mipangilio na Marekebisho

The sensor switch includes three adjustable dials located behind the wall plate (or sometimes accessible via a small cover) to customize its behavior:

  • Time Dial (Delay Time): This dial adjusts how long the lights/appliance remain ON after the last detected motion. Settings include 15 seconds (test mode), 10 minutes, 20 minutes, and 30 minutes. The 15-second test mode is useful for verifying detection and wiring during installation.
  • Range Dial (Detection Sensitivity): This dial controls the sensor's detection coverage area and sensitivity. It can be adjusted from 30% to 100%. A higher setting provides broader coverage.
  • Light Dial (Ambient Light Sensitivity): This dial sets the required ambient light level for the sensor to activate. Settings typically range from 1 to 4. Positions 1-2 are for darker locations, meaning the lights will turn on even if there is some ambient light. Positions 3-4 are for brighter locations, meaning the lights will only turn on when the room is quite dark.
Close-up of TOPGREENER motion sensor switch adjustment dials.

This image highlights the adjustable dials on the TOPGREENER motion sensor switch: the Time Dial for setting the delay before reset, the Range Dial for detection sensitivity, and the Light Dial for ambient light activation levels.

Kina view of TOPGREENER motion sensor switch time, range, and light settings.

Maelezo ya kina view of the TOPGREENER motion sensor switch's adjustment knobs, illustrating the specific settings for time delay (15 seconds, 10, 20, 30 minutes), detection range (positions 1-4), and ambient light sensitivity (positions 1-4).

8. Utatuzi wa shida

If you encounter issues with your TOPGREENER TSOS5-W motion sensor switch, refer to the following common problems and solutions:

  • Taa haziwashi:
    • Ensure power is ON at the circuit breaker.
    • Check all wiring connections for security and proper alignment (Line, Load, Neutral, Ground).
    • Verify the switch is in AUTO or ON mode.
    • Adjust the Range Dial to increase sensitivity.
    • Adjust the Light Dial to a lower setting if the room is dark but the lights are not activating.
    • Test the light bulb or fixture to ensure it is working correctly.
  • Lights stay ON:
    • Ensure the switch is in AUTO mode, not ON mode.
    • Check for constant motion within the sensor's field of view.
    • Adjust the Time Dial to a shorter delay.
    • Adjust the Range Dial to decrease sensitivity if the sensor is detecting motion outside the desired area.
  • Lights turn ON/OFF too frequently:
    • Adjust the Time Dial to a longer delay.
    • Adjust the Range Dial to decrease sensitivity.
    • Ensure the sensor is not obstructed or exposed to drafts that might trigger it.

If the device does not work after installation or troubleshooting, please contact TOPGREENER customer support for assistance.

9. Matengenezo

The TOPGREENER TSOS5-W motion sensor switch requires minimal maintenance.

  • Kusafisha: To clean the switch and wall plate, gently wipe with a soft, damp kitambaa. Usitumie visafishaji vya kukwaruza, miyeyusho, au kemikali kali, kwani hizi zinaweza kuharibu umaliziaji au vipengele vya ndani.
  • Ukaguzi: Periodically inspect the switch for any visible damage or loose connections. If any issues are found, turn off power at the circuit breaker and address them or contact a qualified electrician.

10. Udhamini na Msaada

TOPGREENER products are designed for reliability and performance. While specific warranty details are not provided in this manual, TOPGREENER typically offers a limited warranty on its products. Please refer to the product packaging or the official TOPGREENER webtovuti kwa habari ya sasa ya udhamini.

For technical support, troubleshooting assistance, or warranty claims, please contact TOPGREENER customer service. Contact information can usually be found on the product packaging or the TOPGREENER official webtovuti.

Nyaraka Zinazohusiana - TSOS5-W

Kablaview TopGreener TSOS5/TWOS5 Maagizo ya Usakinishaji wa Kihisi cha Umiliki wa Kihisi
Maagizo ya kina ya usakinishaji wa swichi za TopGreener TSOS5 na TWOS5 za vitambuzi, ikijumuisha vipimo, michoro ya nyaya, uendeshaji, utatuzi na maelezo ya udhamini.
Kablaview Mwongozo wa Usakinishaji wa Kitambuzi cha Mwendo cha PIR cha Teknolojia Mbili cha TOPGREENER TDHOS5
Mwongozo kamili wa usakinishaji na programu kwa ajili ya Kihisi cha Mwendo cha TOPGREENER TDHOS5 Dual Technology Humidity na PIR. Hushughulikia nyaya, usanidi, vipengele, utatuzi wa matatizo, na udhamini wa taa bora za bafuni na udhibiti wa feni.
Kablaview Maagizo ya Juu ya Ufungaji wa Kijani zaidi TGSDS3 LED Dimmer
Mwongozo wa kina wa usakinishaji wa Top Greener TGSDS3 LED Dimmer, unaoangazia nguzo moja na nyaya 3, vipimo vya bidhaa, maagizo ya uendeshaji, na taarifa ya udhamini.
Kablaview Topgreener TDOS5/TDOS5-NL Mwongozo wa Usakinishaji wa Kihisi/Kitambua Nafasi
Mwongozo wa kina wa usakinishaji wa Topgreener TDOS5/TDOS5-NL 2-in-1 Occupancy/Vacancy Sensor Swichi. Inajumuisha vipimo, michoro ya nyaya, mipangilio ya marekebisho, njia za uendeshaji, vidokezo vya utatuzi na maelezo ya udhamini.
Kablaview TopGreener TGT01-H Astronomic In-Ukuta Mwongozo wa Ufungaji na Uendeshaji wa Kipima Muda Unaoweza Kuratibiwa.
Mwongozo wa kina wa kusakinisha na kuendesha Kipima Muda Kinachoweza Kupangwa cha TopGreener TGT01-H Astronomic In-Wall. Jifunze kuhusu vipengele, uwekaji nyaya, upangaji programu na utatuzi wa matatizo.
Kablaview TOPGREENER TDHS5 Mwongozo wa Ufungaji wa Kidhibiti cha Mashabiki wa Kidhibiti Unyevu
Maagizo ya kina ya usakinishaji na mwongozo wa mtumiaji wa Udhibiti wa Mashabiki wa Kihisi Unyevu cha TOPGREENER TDHS5. Jifunze jinsi ya kuweka waya, kupanga na kuendesha vidhibiti vyako vya feni vinavyotambua unyevu kwa ajili ya uingizaji hewa bora wa bafuni.