Mwongozo wa Maelekezo ya Kiunganishi cha Cleveland 105247

Bidhaa Imeishaview

The Cleveland 105247 Connector is a genuine OEM replacement part designed for industrial and commercial applications. Specifically, it is a 1/2 inch, 90-degree greenfield connector, essential for securely joining flexible metal conduit (FMC) or armored cable (AC) to an electrical box or enclosure at a right angle. This component ensures a safe and reliable electrical connection, maintaining the integrity of the wiring system.

Cleveland 105247 Connector Greenfield 1/2 90D

An image showing the Cleveland 105247 Connector, a 1/2 inch, 90-degree greenfield connector. It is made of metal, likely galvanized, with a threaded collar on one end and a clamp mechanism with two screws on the other end for securing a conduit.

Kuweka na Kuweka

Proper installation of the Cleveland 105247 Connector is crucial for electrical safety and system integrity. Always ensure power is disconnected before beginning any installation work.

Maandalizi: Ensure the flexible metal conduit (FMC) or armored cable (AC) is cut cleanly and deburred to prevent wire insulation damage.
Weka Kebo: Legeza cl mbiliamping screws on the connector. Insert the end of the FMC or AC into the clamping end of the 90-degree connector. Ensure the cable is fully seated.
Kebo salama: Kaza cl mbiliamping screws firmly and evenly to secure the cable within the connector. Do not overtighten, as this can damage the cable or connector.
Attach to Box: Insert the threaded end of the connector into the appropriate knockout hole of the electrical box or enclosure.
Kiunganishi salama: Thread the locknut (not included with connector) onto the threaded end of the connector from inside the electrical box. Tighten the locknut securely to hold the connector in place.
Ukaguzi wa Mwisho: Verify that all connections are tight and secure, and that the cable is not strained or kinked.

Kumbuka Usalama: All electrical work should be performed by qualified personnel and in accordance with local electrical codes and regulations.

Kazi na Matumizi

The Cleveland 105247 Connector serves as a critical component in electrical conduit systems. Once properly installed, its function is to provide a secure, protective, and continuous pathway for electrical wiring, allowing for a 90-degree change in direction of the conduit run. This ensures the wires are protected from physical damage and environmental factors, while maintaining electrical continuity and grounding where applicable.

Conduit Protection: Protects electrical conductors within the conduit from abrasion and impact.
Directional Change: Facilitates routing of conduit around corners or obstacles.
Muunganisho Salama: Ensures a firm mechanical connection between the conduit and the electrical enclosure.
Ubora wa OEM: As a genuine OEM part, it guarantees compatibility and performance matching original equipment specifications.

Matengenezo

The Cleveland 105247 Connector is designed for durability and requires minimal maintenance. However, periodic inspection is recommended to ensure continued performance and safety.

Ukaguzi wa Visual: Regularly inspect the connector for any signs of physical damage, corrosion, or loosening.
Ukaguzi wa Ugumu: Mara kwa mara angalia ukali wa clamping screws and the locknut securing the connector to the electrical box. Retighten if necessary, ensuring not to overtighten.
Mambo ya Mazingira: If installed in environments with high humidity, extreme temperatures, or corrosive agents, more frequent inspections may be necessary.
Kusafisha: If dust or debris accumulates, gently wipe the exterior of the connector with a dry, clean cloth. Do not use abrasive cleaners or solvents.
Uingizwaji: If any damage, significant corrosion, or deformation is observed, the connector should be replaced immediately with a genuine OEM part to maintain system integrity and safety.

Kutatua matatizo

While the Cleveland 105247 Connector is a robust component, issues can arise from improper installation or external factors. Here are some common issues and their potential solutions:

Tatizo	Sababu inayowezekana	Suluhisho
Loose Cable Connection	Clamping screws not tightened sufficiently.	Ensure power is off. Retighten clamping screws evenly and firmly.
Connector Detached from Box	Locknut not tightened or came loose.	Ensure power is off. Re-secure the locknut inside the electrical box.
Cable Damage at Connector Entry	Cable not deburred before insertion; overtightening of screws.	Ensure power is off. Inspect cable for damage. If damaged, replace cable and/or connector. Ensure proper deburring and tightening during reinstallation.
Corrosion on Connector	Exposure to moisture or corrosive agents.	Clean gently if minor. If significant, replace the connector. Consider environmental protection for future installations.

If troubleshooting steps do not resolve the issue, or if you are unsure about any electrical procedure, it is recommended to consult a qualified electrician.

Vipimo vya Bidhaa

Chapa	CLEVELAND
Nambari ya Mfano	CLE105247
Aina ya Bidhaa	Connector; Greenfield; 90-Degree
Ukubwa	inchi 1/2
Vipimo	Inchi 5 x 6 x 9
Uzito	1.6 wakia
Mtengenezaji	Cleveland
Nchi ya Asili	Marekani
ASIN	B01F6CANE4

Taarifa ya Udhamini

As a genuine OEM (Original Equipment Manufacturer) replacement part, the Cleveland 105247 Connector is manufactured to the highest standards and is typically covered by the manufacturer's standard warranty for OEM parts. Specific warranty terms and conditions may vary depending on the point of purchase and regional regulations. Using genuine OEM parts helps maintain the warranty of the equipment it is installed into. For detailed warranty information, please refer to the documentation provided with your original equipment or contact the manufacturer directly.

Usaidizi wa Wateja

For technical assistance, questions regarding installation, or to report any issues with your Cleveland 105247 Connector, please contact Cleveland customer support.

Mtengenezaji: Cleveland
Webtovuti: Please refer to the official Cleveland manufacturer webtovuti kwa maelezo ya mawasiliano.
Kumbuka: When contacting support, please have your product model number (CLE105247) and any relevant purchase information ready.

	Mwongozo wa Sehemu za Cleveland SteamChef 22CET6.1 Mwongozo wa kina wa sehemu za miundo ya Cleveland Energy Star SteamChef 22CET6.1, inayoangazia vipengele, mikusanyiko, na miundo ya umeme kwa ajili ya huduma na matengenezo.
	Jenereta ya Mvuke ya Gesi Mbili ya Cleveland Gemini & Mwongozo wa Waendeshaji Mvuke wa Upitishaji Mwongozo huu wa waendeshaji (Sehemu Na. GEMINI-OPM B 7/02) unatoa maagizo ya kina ya matumizi, utunzaji, matengenezo, na utatuzi wa Jenereta ya Mvuke ya Gesi Miwili ya Cleveland Gemini na miundo ya Convection Steamer 24CGA6.2 na 24CGA10.2.
	Cleveland SteamChef 22CCGT6 Mvuke wa Kupitisha Usio na Uunganisho wa Gesi: Mwongozo wa Uendeshaji, Ufungaji na Matengenezo. Mwongozo wa kina wa uendeshaji, usakinishaji, na matengenezo kwa Cleveland SteamChef 22CCGT6 Gas Convection Steamer na Easy Timer. Inajumuisha miongozo ya usalama, maelezo ya bidhaa, taratibu za usakinishaji, maagizo ya uendeshaji, kusafisha, matengenezo na utatuzi wa matatizo.
	Cleveland SteamCraft 24CEA10.2 Mvuke wa Kupitishia Umeme: Mwongozo wa Uendeshaji, Ufungaji na Matengenezo Mwongozo wa kina wa Cleveland SteamCraft 24CEA10.2 Electric Convection Steamer, uendeshaji unaofunika, usakinishaji, matengenezo, utatuzi wa matatizo, na taratibu za usalama. Inajumuisha maagizo ya kina ya usanidi, matumizi ya kila siku, kusafisha na matengenezo ya kuzuia.
	Mwongozo wa Waendeshaji wa Cleveland SteamCraft Ultra 5 & Ultra 10: Matumizi na Utunzaji Mwongozo rasmi wa waendeshaji wa Cleveland SteamCraft Ultra 5 na Ultra 10 za mvuke za gesi. Hutoa taarifa muhimu kuhusu uendeshaji salama, matengenezo, utatuzi wa matatizo, na kupikia kwa mvuke kwa jikoni za kibiashara.
	Vipimo vya Steamer ya Msongamano Isiyo na Boiler ya Cleveland 3 na 6 ya Kasi ya Juu Vipimo na vipengele vya kina vya Cleveland SteamChef™ 3 & 6, stima ya mvuke ya kasi ya juu, isiyo na boiler yenye ujazo wa maji kiotomatiki na mifereji ya maji, iliyoundwa kwa ajili ya jikoni za kibiashara. Inajumuisha uwezo, vipimo, mahitaji ya gesi na umeme, na vipengele vya kawaida.

CLEVELAND CLE105247

Instruction Manual: Cleveland 105247 Connector