Mwongozo wa Maelekezo ya Viti vya Spika vya Kitaalamu vya Audibax Neo 130

1. Utangulizi

Thank you for choosing the Audibax Neo 130 Professional Speaker Stands. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your new speaker stands. Please read this manual thoroughly before use and retain it for future reference.

The Audibax Neo 130 speaker stands are designed to securely support speakers up to 30 kg (66.1 lbs), offering adjustable height from 120 cm to 180 cm. They feature a robust metal construction with a 35 mm tube diameter, compatible with most PA speakers.

2. Maagizo ya Usalama

To prevent injury or damage to your equipment, always observe the following safety precautions:

Kiwango cha Juu cha Uwezo wa Mzigo: Do not exceed the maximum load capacity of 30 kg (66.1 lbs) per stand. Overloading can cause instability and collapse.
Uso Imara: Always place the speaker stands on a flat, stable, and level surface. Uneven surfaces can lead to tipping.
Leg Spread: Ensure the tripod legs are fully extended and locked into position for maximum stability.
Marekebisho ya Urefu: When adjusting the height, ensure the safety pin is correctly inserted into the desired hole after setting the height. Always loosen the adjustment knob before lowering or raising the pole.
Nafasi ya Spika: Center the speaker securely on the stand's pole. Ensure the speaker's mounting hole is compatible with the 35 mm pole diameter.
Watoto na Wanyama wa Kipenzi: Keep children and pets away from the stands, especially during setup and adjustment.
Ukaguzi: Before each use, inspect the stands for any signs of damage, wear, or loose components. Do not use damaged stands.
Usafiri: Use the provided carrying bag for safe transport to prevent damage to the stands and other equipment.

3. Yaliyomo kwenye Kifurushi

Thibitisha kuwa vipengee vyote vipo kwenye kifurushi chako:

2 x Audibax Neo 130 Speaker Stands
1 x Nylon Carrying Bag

Two Audibax Neo 130 speaker stands and a black carrying bag. — Figure 3.1: Contents of the Audibax Neo 130 package, including two speaker stands and a carrying bag.

The image above displays the complete package contents: two Audibax Neo 130 speaker stands, folded for transport, alongside their dedicated black nylon carrying bag. The stands are black with visible adjustment mechanisms.

4. Maagizo ya Kuweka

Follow these steps to set up your Audibax Neo 130 speaker stands:

4.1 Kufungua Stendi

Remove the speaker stand from the carrying bag.
Weka msimamo kwenye uso wa gorofa, imara.
Gently spread the three legs outwards until they are fully extended and the central support mechanism is locked. Ensure all legs are evenly spread for maximum stability.

Two Audibax Neo 130 speaker stands with legs fully extended and deployed. — Figure 4.1: Two Audibax Neo 130 speaker stands in their fully deployed, stable configuration.

This image shows two Audibax Neo 130 speaker stands with their tripod legs fully extended and locked, ready for height adjustment and speaker placement. The stands are black and appear stable.

4.2 Kurekebisha Urefu

Locate the height adjustment knob and safety pin on the upper pole section.
Remove the safety pin by pulling its ring.
Loosen the adjustment knob by turning it counter-clockwise.
Carefully raise or lower the upper pole to the desired height (between 120 cm and 180 cm).
Once the desired height is reached, align the hole in the upper pole with one of the holes in the lower pole. Insert the safety pin through both holes to secure the height.
Tighten the adjustment knob firmly by turning it clockwise to further secure the pole and prevent slippage.

Close-up of the height adjustment knob and safety pin mechanism on the speaker stand. — Figure 4.2: Detail of the height adjustment knob and safety pin, crucial for securing the stand at the desired height.

This close-up image highlights the black star-shaped adjustment knob and the silver safety pin with its ring, which are used to set and lock the height of the speaker stand's upper pole.

4.3 Kumpandisha Spika

Ensure the stand is stable and the height is securely locked with both the safety pin and adjustment knob.
Carefully lift your speaker and align its bottom mounting hole with the top of the stand's pole (35 mm diameter).
Lower the speaker onto the pole, ensuring it sits firmly and is centered.
Verify the speaker's stability before leaving it unattended.

5. Operating the Speaker Stands

Once set up, the Audibax Neo 130 speaker stands provide a stable platform for your speakers. Consider the following for optimal performance:

Nafasi: Place the stands in locations that optimize sound projection and minimize obstruction.
Ukaguzi wa Utulivu: Periodically check the stability of the stands and speakers, especially in high-traffic areas or after adjustments.
Mambo ya Mazingira: Avoid placing stands in areas where they might be exposed to strong winds, vibrations, or excessive moisture, which could compromise stability.

6. Matengenezo

Proper maintenance ensures the longevity and safe operation of your speaker stands:

Kusafisha: Wipe the stands with a soft, dry cloth to remove dust and dirt. For stubborn marks, use a slightly damp cloth and mild soap, then dry thoroughly. Avoid abrasive cleaners or solvents.
Hifadhi: When not in use, fold the stands and store them in the provided nylon carrying bag. Store in a cool, dry place away from direct sunlight and extreme temperatures.
Ukaguzi: Regularly inspect all components, including the legs, poles, adjustment knobs, and safety pins, for any signs of wear, damage, or corrosion. Ensure all screws and bolts are tight.
Upakaji mafuta: If the height adjustment mechanism becomes stiff, a small amount of silicone-based lubricant can be applied to the inner pole, avoiding contact with the adjustment knob's friction surfaces.

Two Audibax Neo 130 speaker stands folded and placed next to their black carrying bag. — Figure 6.1: Audibax Neo 130 speaker stands folded for compact storage and transport, alongside their protective carrying bag.

This image shows the two Audibax Neo 130 speaker stands in their folded position, demonstrating their compact form factor for storage or transport within the included carrying bag.

7. Utatuzi wa shida

If you encounter issues with your speaker stands, refer to the following common problems and solutions:

Tatizo	Sababu inayowezekana	Suluhisho
Stand is unstable/wobbly.	Legs not fully extended or locked; uneven surface; overloaded.	Ensure legs are fully spread and locked. Move to a flat, level surface. Verify speaker weight does not exceed 30 kg.
Ugumu wa kurekebisha urefu.	Adjustment knob too tight; safety pin stuck; pole dirty/corroded.	Loosen adjustment knob completely. Ensure safety pin is fully removed. Clean and lubricate the inner pole if necessary.
Speaker does not fit on pole.	Speaker mounting hole is not 35 mm diameter.	Verify your speaker's mounting hole diameter. The Audibax Neo 130 is designed for 35 mm poles. Do not force the speaker.

8. Vipimo

Kipengele	Vipimo
Mfano	130
Nambari ya Sehemu	10051437
Nyenzo	Chuma
Rangi	Matt Nyeusi
Uwezo wa Kupakia	Kilo 30 (pauni 66.1)
Kipenyo cha bomba	35 mm
Urefu Unaoweza Kurekebishwa	Sentimita 120 - 180 (inchi 47.2 - inchi 70.9)
Vipimo vya Bidhaa (zilizokunjwa)	Takriban inchi 4.72 x 7.87 x 39.37 (cm 12 x 20 x 100)
Item Weight (per stand)	Takriban kilo 4 (pauni 8.8)

9. Udhamini na Msaada

Audibax products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Audibax webtovuti.

For technical support, spare parts, or service inquiries, please contact Audibax customer service through their official channels. Please have your model number (Neo 130) and part number (10051437) ready when contacting support.

Figure 9.1: The official Audibax brand logo.

The image displays the Audibax brand logo, featuring stylized black text with an orange graphic element resembling sound waves.

	Audibax DSP Series Mwongozo wa Mtumiaji wa Spika Zinazotumika Mwongozo wa kina wa mtumiaji wa Audibax DSP8, DSP10, DSP12, na spika amilifu za kitaalamu za DSP15 zenye DSP na Bluetooth. Inashughulikia maagizo ya usalama, maelezo ya bidhaa, kazi, uendeshaji wa DSP, miunganisho ya XLR iliyosawazishwa, na miongozo ya utupaji.
	Audibax DSP12s/DSP15s/DSP18s Mwongozo wa Mtumiaji wa Subwoofer wa Kitaalamu Mwongozo wa kina wa mtumiaji wa Audibax DSP12s, DSP15s, na subwoofers za kitaalamu za DSP18s. Inajumuisha miongozo ya usalama, vipimo vya bidhaa, maelezo ya kazi, maagizo ya uendeshaji wa DSP na maelezo ya utupaji.
	Mwongozo wa Mtumiaji wa Mchanganyiko wa Kitaalamu wa AUDIBAX 502/802/1002 Mwongozo wa kina wa mtumiaji wa AUDIBAX 502, 802, na consoles za uchanganyaji za kitaalamu 1002. Inashughulikia vipengele, vipimo, maagizo ya usalama, usakinishaji na uendeshaji.
	Mwongozo wa Mtumiaji wa Kichanganyiko cha Kitaalamu cha AUDIBAX 1202 FXX Mwongozo kamili wa mtumiaji wa AUDIBAX 1202 FXX Professional Mixer, maelezo ya vipengele, vipimo, miunganisho, maagizo ya usalama, na uendeshaji.
	Audibax Monster 90 Moving Head LED Spot Light User Manual User manual for the Audibax Monster 90, an 80W LED moving head spot light. Provides detailed specifications, DMX control information, safety guidelines, package contents, and disposal instructions for event technology applications.
	Mwongozo wa Udhibiti wa AUDIBAX 384 Mwongozo wa matumizi kamili kwa ajili ya udhibiti wa mwangazaji wa DMX AUDIBAX Control 384, usanidi wa data, uendeshaji, programu, sifa na teknolojia maalum.

Audibax Neo 130