Fatek FBs-20MAT2-AC PLC Controller User Manual

Model: FBs-20MAT2-AC (FBs-20MAT)

1. Utangulizi

The Fatek FBs-20MAT2-AC Programmable Logic Controller (PLC) is an advanced industrial control device designed for automation tasks. It features a user-friendly and readable multi-input/multi-output function structure, allowing for complex functionalities with fewer instructions compared to other PLC brands. This manual provides essential information for the proper installation, operation, and maintenance of your FBs-20MAT2-AC controller.

2. Bidhaa Imeishaview

Mbele view of the Fatek FBs-20MAT2-AC PLC Controller, showing input/output terminals, status indicators, and model number.

This image displays the Fatek FBs-20MAT2-AC Programmable Logic Controller. It features clearly labeled input (X) and output (Y) terminals, power input (AC100-240V), and status indicator LEDs for Power, Run, and Error. The model number FBs-20MA is visible on the front panel, along with TX/RX indicators for communication.

3. Kuweka na Kuweka

3.1 Muunganisho wa Ugavi wa Umeme

The FBs-20MAT2-AC controller operates on a 100 ~ 240VAC power supply. Ensure the power source matches these specifications before connecting. Connect the AC power lines to the designated 'L' and 'N' terminals on the controller. Always ensure power is disconnected during wiring to prevent electrical shock.

3.2 Digital Input/Output Wiring

The controller features 12 points of 24VDC digital input (up to 10KHz in 4 points) and 8 points of Sink (NPN) transistor digital output (4 points 10KHz output). Refer to the terminal labels (X0-X13 for inputs, Y0-Y9 for outputs) for correct wiring. Ensure all connections are secure and follow industrial wiring standards.

3.3 Bandari ya Mawasiliano

The FBs-20MAT2-AC includes 1 built-in RS-232 port, which can be expanded up to 3 ports. This port is used for programming and communication with other devices. Connect your programming cable or communication device to the RS-232 port (labeled 'PORTO').

3.4 Kuweka

Mount the PLC in a stable, well-ventilated enclosure, away from excessive heat, moisture, and electromagnetic interference. Ensure adequate space for wiring and heat dissipation.

4. Maagizo ya Uendeshaji

4.1 Programming Software

The PLC is programmed using the WinProladder ladder programming tool. This software can be downloaded from the official Fatek website at no extra charge. Install the software on your computer and connect to the PLC via the RS-232 port to upload or download programs.

4.2 Operesheni ya Msingi

Washa: After connecting the power supply, the 'POW' indicator LED should illuminate.
Modi ya Kuendesha: Once a program is loaded and the PLC is set to run mode, the 'RUN' indicator LED will illuminate, indicating active program execution.
Dalili ya Hitilafu: If an error occurs, the 'ERR' indicator LED will illuminate. Refer to the troubleshooting section for common error resolutions.
Mawasiliano: The 'TX' and 'RX' LEDs indicate data transmission and reception activity on the communication port.

5. Matengenezo

Regular maintenance ensures the longevity and reliable operation of your PLC. Always disconnect power before performing any maintenance.

Kusafisha: Keep the PLC and its enclosure clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquid cleaners or solvents.
Udhibiti wa Mazingira: Ensure the operating environment adheres to the specified temperature and humidity ranges. Protect the unit from excessive vibrations and corrosive gases.
Ukaguzi wa Muunganisho: Periodically inspect all wiring connections for tightness and signs of corrosion or damage.
Sasisho za Firmware: Check the Fatek website for any available firmware updates that may improve performance or address issues.

6. Utatuzi wa shida

Sehemu hii inatoa mwongozo kwa masuala ya kawaida. Kwa matatizo magumu, wasiliana na usaidizi wa kiufundi.

No Power (POW LED Off):
- Check the AC power supply connection and ensure it is within the 100~240VAC range.
- Verify the power cable is securely connected to the PLC and the power outlet.
- Check for blown fuses in the power circuit.
PLC Not Running (RUN LED Off, POW LED On):
- Ensure a valid program is loaded into the PLC.
- Check if the PLC is in 'STOP' mode. Use WinProladder to switch to 'RUN' mode.
- Verify there are no critical errors indicated by the 'ERR' LED.
Error Indication (ERR LED On):
- Connect to the PLC using WinProladder software to view the error code and description.
- Common errors include program syntax errors, I/O module faults, or memory issues.
- Consult the WinProladder software manual for specific error code interpretations.
Communication Issues (TX/RX LEDs Inactive):
- Verify the RS-232 cable connection is secure and correct.
- Check the communication settings (baud rate, data bits, parity, stop bits) in WinProladder and ensure they match the PLC's settings.
- Ensure the correct COM port is selected on your computer.
Input/Output Malfunction:
- Verify wiring for the specific input/output points.
- Check the status of the input devices (sensors, switches) and output devices (relays, indicators).
- Use WinProladder to monitor the real-time status of I/O points to diagnose the issue.

7. Vipimo

Kipengele	Vipimo
Nambari ya Mfano	FBs-20MAT2-AC (FBs-20MAT)
Pembejeo za Dijitali	12 points, 24VDC (up to 10KHz in 4 points)
Matokeo ya Dijiti	8 points, Sink (NPN) transistor (4 points 10KHz output)
Bandari za Mawasiliano	RS-232 1 iliyojengewa ndani (inayoweza kupanuliwa hadi 3)
Ugavi wa Nguvu	100 ~ 240VAC
Vyeti	UL kuthibitishwa
Vipimo vya Kifurushi	Inchi 4.5 x 4 x 4
Uzito wa Kipengee	Pauni 1.01
Nchi ya Asili	Taiwan
Voltage	Volti 240 (AC)
Aina ya Kuonyesha	LCD au LED
Joto la Uendeshaji	20 Digrii Celsius
UPC	687965401068

8. Udhamini na Msaada

For information regarding product warranty, technical support, or service, please refer to the documentation provided with your purchase or contact the manufacturer directly. The seller for this product is Fatek USA. You may also visit the official Fatek webtovuti kwa rasilimali za ziada na maelezo ya mawasiliano.

	Vidhibiti vya Mantiki Vinavyoweza Kupangwa vya FBS-Series vya FATEK - Laha ya Data na Vipimo Karatasi kamili ya data ya Vidhibiti vya Mantiki Vinavyoweza Kupangwa vya FATEK FBS-Series (PLCs), vipengele vya kina, vipimo vya kiufundi, uwezo wa mawasiliano, moduli za upanuzi, na taarifa za modeli. Inajumuisha teknolojia ya msingi, vipengele vinavyofaa kwa mtumiaji, chaguo za udhibiti wa hali ya juu, na orodha ya modeli zenye maelezo.
	FATEK FBs-Series PLC: Vidhibiti Vizuri Vinavyoweza Kupangwa vya Mantiki kwa Uendeshaji Kiwandani Gundua FATEK FBs-Series Programmable Logic Controllers (PLCs), inayoangazia teknolojia ya kisasa ya SoC, chaguo pana za mawasiliano, uchakataji wa kasi ya juu, na udhibiti jumuishi wa PLC & NC kwa suluhu thabiti za kiotomatiki za kiviwanda. Gundua maelezo ya kina, vipengele, na maelezo ya mfano.
	Fatek FBs-CM25/CM55/CBE Ethernet Module Mwongozo wa Mtumiaji Mwongozo wa mtumiaji wa Moduli ya Fatek FBs-CM25/CM55/CBE Ethernet, maelezo ya kina, usakinishaji wa maunzi, usanidi wa programu, na itifaki za mawasiliano za mitambo ya kiotomatiki ya viwandani.
	FATEK FBs-1LC/FBs-2LC Pakia Kifaa cha Kuingiza Data: Viagizo na Mwongozo wa Usanidi Mwongozo wa kina wa moduli za uingizaji wa analogi za FATEK FBs-1LC na FBs-2LC kwa PLC. Inashughulikia vipimo, usakinishaji, usanidi, upangaji ramani wa rejista, na wiring kwa kipimo sahihi cha uzito.
	FATEK FBs-W2C Mwongozo wa Mtumiaji wa Moduli ya Mawasiliano ya Wi-Fi Mwongozo huu unatoa maelezo ya kina juu ya moduli ya mawasiliano ya FATEK FBs-W2C Wi-Fi kwa PLC, ikijumuisha vipengele vyake, vipimo, usakinishaji, usanidi wa mtandao kwa kutumia kiolesura cha PLC au Smart Config, masasisho ya programu dhibiti kupitia OTA, ulandanishi wa muda wa mtandao (SNTP), na programu ya W2C Configurator. Inajumuisha viambatisho vilivyo na usanidi wa rejista, maelezo ya saa za eneo, na uoanifu wa sehemu za ufikiaji.
	Mwongozo wa Mtumiaji wa Maagizo ya FATEK M-PLC: Mwongozo wa Kina kwa Vidhibiti Vinavyoweza Kupangwa Gundua Mwongozo wa Mtumiaji wa Maagizo ya FATEK M-PLC kwa mwongozo wa kina kuhusu utendakazi wa kidhibiti kinachoweza kuratibiwa, upangaji wa mchoro wa ngazi, na masuluhisho ya kiotomatiki. Pata maelezo kuhusu vipengele na utendaji wa M Series PLC.

Fatek FBs-20MAT2-AC (FBs-20MAT)