Kitendawili cha DCTXP2/86 Mwongozo wa Mtumiaji wa Mawasiliano ya Sumaku ya Redio

Utangulizi

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the Paradox DCTXP2/86 868 MHz Radio Magnetic Contact. This device is designed to enhance the security of your premises by detecting the opening and closing of doors and windows. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Bidhaa Imeishaview

The Paradox DCTXP2/86 is a supervised radio magnetic contact operating at 868 MHz, specifically designed for doors and windows. It features two independent radio channels and the capability to connect one external sensor. An anti-tamper switch is integrated for enhanced security.

Mara kwa mara: 868 MHz version.
Vituo: Two independent radio channels.
Sensor ya nje: Possibility to connect one external sensor.
Tamper Ulinzi: Includes an anti-tampkubadili.
Uzingatiaji: Conforms to EN50131-2-6 Grade 2.

Image of the Paradox DCTXP2/86 Radio Magnetic Contact, showing the main sensor unit and the smaller magnet.

The image displays the Paradox DCTXP2/86 radio magnetic contact. It consists of two main components: a larger rectangular sensor unit and a smaller rectangular magnet. Both components are white and designed to be mounted on a door or window frame and its corresponding moving part.

Kuweka na Kuweka

1. Ufungaji wa Betri

The DCTXP2/86 requires two AAA alkaline batteries for operation. Ensure correct polarity when inserting the batteries.

Fungua kwa uangalifu casing of the main sensor unit.
Insert two AAA alkaline batteries into the designated battery compartment, observing the polarity markings (+/-).
Funga casing salama.

2. Mounting the Contact

The magnetic contact consists of two parts: the main sensor unit and the magnet. They should be mounted on the door/window frame and the moving part (door/window) respectively, ensuring they are aligned and in close proximity when the door/window is closed.

Choose a mounting location where the sensor and magnet can be securely attached and are not easily accessible to intruders.
Mount the larger sensor unit on the fixed frame of the door or window.
Mount the smaller magnet on the moving part of the door or window, directly opposite the sensor unit.
Ensure the gap between the sensor and the magnet is minimal (typically less than 1 cm) when the door/window is closed for reliable detection.
Use screws or strong adhesive pads (not included) for secure mounting.

3. Programming/Pairing with Alarm System

The DCTXP2/86 needs to be programmed into your Paradox alarm system. Refer to your alarm system's main control panel manual for specific instructions on adding wireless zones. The DCTXP2/86 offers two independent radio channels that can be assigned to different zones.

Access the programming mode of your Paradox alarm control panel.
Select the option to add a new wireless zone or device.
Activate the DCTXP2/86 (e.g., by opening and closing the contact, or by triggering the tamper switch) to transmit its unique serial number to the control panel.
Assign the contact to the desired zone(s) and configure its attributes (e.g., entry/exit, perimeter, 24-hour).
Test the communication and detection by opening and closing the protected door/window.

Maagizo ya Uendeshaji

Once properly installed and programmed, the Paradox DCTXP2/86 operates automatically. When the protected door or window is opened, the magnetic contact separates, triggering an alarm signal to the control panel. When the door or window is closed, the contact re-establishes, and the zone returns to a normal state.

Ugunduzi: The sensor detects the separation of the magnet from the main unit.
Usimamizi: The DCTXP2/86 is a supervised device, meaning it periodically communicates with the control panel to confirm its presence and operational status. If communication is lost, the control panel will indicate a fault.
Tamper Ulinzi: Ikiwa casing of the main sensor unit is opened, the integrated tamper switch will trigger an alarm, even if the system is disarmed.
Ingizo la Kihisi cha Nje: The two independent radio channels allow for monitoring of the magnetic contact itself and an additional wired sensor connected to the DCTXP2/86's input terminals.

Matengenezo

Ubadilishaji wa Betri

The control panel will typically indicate a low battery condition for the DCTXP2/86. Replace batteries promptly to ensure continuous protection.

Disarm your alarm system before replacing batteries to avoid false alarms.
Fungua casing of the main sensor unit.
Ondoa betri za zamani za AAA.
Insert new AAA alkaline batteries, ensuring correct polarity.
Funga casing securely. The tamper switch will activate briefly, and the device will re-establish communication with the control panel.

Kusafisha

Clean the device periodically with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing or internal components. Ensure the sensor and magnet surfaces are free from dirt or debris that could interfere with their operation.

Kutatua matatizo

Tatizo	Sababu inayowezekana	Suluhisho
Device not detecting opening/closing.	Betri za chini au zilizokufa. Sensor and magnet misalignment. Device not properly programmed. Interference with radio signal.	Badilisha betri. Adjust mounting position to ensure proper alignment and close proximity. Verify programming with the alarm control panel. Check for sources of radio interference (e.g., large metal objects, other wireless devices).
Control panel shows "Low Battery" for the device.	Betri zinapungua.	Replace both AAA batteries immediately.
Tamper alarm triggered unexpectedly.	Casing not securely closed. Faulty tampkubadili.	Hakikisha casing is fully snapped shut. Ikiwa tatizo litaendelea, wasiliana na usaidizi wa kiufundi.
Device not communicating with control panel.	Kati ya masafa. Betri zimekufa. Hitilafu ya mfumo.	Relocate the device closer to the control panel or install a wireless repeater. Badilisha betri. Consult your alarm system's manual or contact a professional installer.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Paradox technical support or a certified alarm system installer.

Vipimo

Kipengele	Maelezo
Mfano	DCTXP2/86
Mzunguko	868 MHz
Vipimo (L x W x H)	11.2 x 3.2 x 2.5 cm (approx. 112x32x25 mm as per description)
Uzito	gramu 50
Chanzo cha Nguvu	Betri imeendeshwa
Aina ya Betri	2 x AAA Alkaline batteries (not included with product, but required for operation)
Vipengele vya Ziada	Dust resistant, 2 independent radio channels, external sensor input, anti-tampkubadili
Kuzingatia	EN50131-2-6 daraja la 2

Udhamini na Msaada

For information regarding the warranty of your Paradox DCTXP2/86, please refer to the warranty card included with your product or visit the official Paradox webtovuti. Sheria na masharti ya udhamini yanaweza kutofautiana kulingana na eneo.

If you require technical assistance, support, or have questions about your device, please contact your authorized Paradox dealer or Paradox customer support. Contact information can typically be found on the Paradox webtovuti au katika hati za bidhaa yako.

It is recommended that installation and maintenance of security system components be performed by qualified professionals.

	Paradox SR250 King'ora kisicho na waya kilicho na Ufungaji wa Mwanga wa Strobe uliojengwa ndani na Mwongozo wa Uendeshaji. Mwongozo wa kina wa kusakinisha, kutayarisha programu, na kuendesha king'ora cha nje kisichotumia waya cha Paradox SR250 chenye mwanga wa strobe. Inajumuisha vipimo, vipengele, na utatuzi wa matatizo.
	Paradox R915 4-Wire Proximity Reader na Mwongozo wa Usakinishaji wa Kitufe Mwongozo wa kina wa usakinishaji na uendeshaji wa Paradox R915 4-waya kisomaji na vibodi ukaribu wa ndani/nje, vipengele vya kina, vipimo, viashirio vya hali na taarifa ya utiifu.
	Kitendawili SR130 Siren ya Nje Isiyo na Waya: Mwongozo wa Ufungaji na Usanidi Mwongozo wa kina wa kusakinisha na kusanidi Kitendawili cha SR130 King'ora cha Nje kisichotumia waya na mwanga wa strobe uliojengewa ndani. Inashughulikia uboreshaji wa firmware, tampusimamizi, vipimo, maoni ya LED, uoanifu, hatua za usakinishaji na upangaji kupitia vitufe au programu ya BabyWare.
	Paradox MG5000+ / MG5050+ Mwongozo wa Ufungaji Mwongozo wa kina wa usakinishaji wa Paradox MG5000+ na MG5050+ mifumo ya usalama isiyotumia waya, inayoelezea usanidi, upangaji programu, vipengele, na utatuzi wa matatizo kwa visakinishi.
	Kitendawili cha ZX82 Mwongozo wa Ufungaji wa Moduli ya Upanuzi wa Sehemu 8 Mwongozo huu wa usakinishaji unatoa maelezo ya kina kwa Moduli ya Upanuzi wa Kitendawili cha ZX82 8-Zone, inayofunika vipengele vyake, uoanifu na paneli za kudhibiti Kitendawili, taratibu za uunganisho, maagizo ya programu ya mifumo ya EVO na MG/SP, kazi za viashiria vya LED, vipimo vya kiufundi, na maelezo ya uboreshaji wa programu dhibiti.
	PARADOX RTX3 Wireless Expansion Module Installation Manual Installation manual for the PARADOX RTX3, a 2-way, 32-zone wireless expansion module that enhances EVO and SP Series control panels with wireless hardware support for sirens, detectors, and remote controls.

Paradox DCTXP2/86