COTEK SP2000-224

Mwongozo wa Mtumiaji wa COTEK SP2000-224 Kibadilishaji cha Mawimbi Safi ya Sinai

Model: SP2000-224

1. Utangulizi

This manual provides essential information for the safe and efficient operation of your COTEC SP2000-224 Pure Sine Wave Inverter. This advanced inverter offers high efficiency and power density, featuring selectable output voltage and frequency, all housed within a robust aluminum casing. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the device.

2. Taarifa za Usalama

Always observe the following safety precautions to prevent injury and damage to the inverter or connected equipment:

  • Uingizaji hewa: Hakikisha uingizaji hewa wa kutosha karibu na inverter. Usizuie fursa za uingizaji hewa.
  • Mazingira: Install the inverter in a dry, cool, and well-ventilated area, away from direct sunlight, heat sources, and flammable materials.
  • Kutuliza: Properly ground the inverter chassis to prevent electrical shock.
  • Uingizaji wa DC: Connect the inverter only to a 24V DC battery bank. Ensure correct polarity (positive to positive, negative to negative). Reverse polarity will damage the unit.
  • Pato la AC: Do not overload the inverter. Ensure the total wattage of connected AC devices does not exceed the inverter's rated output.
  • Kuhudumia: Usijaribu kufungua au kuhudumia kibadilishaji umeme mwenyewe. Waelekeze wafanyakazi wote waliohitimu huduma.
  • Mfiduo wa Maji: Keep the inverter away from water, rain, or excessive moisture.

3. Bidhaa za Bidhaa

The COTEC SP2000-224 Inverter incorporates several advanced features for reliable power conversion:

  • Towe la wimbi safi la sine kwa vifaa vya elektroniki nyeti.
  • Power ON / OFF remote control capability via a dedicated green terminal.
  • Full input and output isolation for enhanced safety.
  • Temperature and load-controlled cooling fan for efficient heat dissipation.
  • Kiolesura kinachofaa kwa mtumiaji chenye viashiria vya hali ya LED vya rangi 3.
  • Output frequency selectable between 50 Hz and 60 Hz via DIP switch.
  • Pato voltagInaweza kuchaguliwa kupitia swichi ya DIP.
  • Power saving mode adjustable via a variable resistor.
  • Comprehensive input protection: Reverse Polarity (via fuse), Under Voltage, Zaidi ya Juztage.
  • Comprehensive output protection: Short Circuit, Overload, Over Temperature.
  • Certifications: E13, UL, CE, FCC approved.

4. Kuweka na Kuweka

Proper installation is crucial for the inverter's performance and safety.

4.1 Ufungaji wa Kimwili

Mount the inverter securely in a location that meets the safety requirements mentioned in Section 2. Ensure sufficient space around the unit for airflow.

COTEK SP2000-224 Pure Sine Wave Inverter, angled view

Kielelezo cha 4.1: Mwenye pembe view of the COTEC SP2000-224 Pure Sine Wave Inverter, showcasing its robust blue and gray casing.

4.2 Muunganisho wa Kuingiza Data wa DC

Connect the inverter to a 24V DC battery bank using appropriate gauge cables. Ensure the positive (+) terminal of the inverter connects to the positive terminal of the battery, and the negative (-) terminal of the inverter connects to the negative terminal of the battery. Install an appropriate fuse or circuit breaker in the positive DC line close to the battery.

Nyuma view of COTEC SP2000-224 Inverter showing DC input terminals and chassis ground

Kielelezo cha 4.2: Nyuma view of the inverter, highlighting the DC input terminals (red for positive, black for negative), the chassis ground screw, and the remote control terminal.

4.3 Chassis Ground Connection

Connect the chassis ground terminal (labeled 'CHASSIS GROUND') to a reliable earth ground point. This is a critical safety step.

4.4 AC Output and Controls

The inverter features a standard AC outlet and control switches on its front panel.

Mbele view of COTEC SP2000-224 Inverter showing AC outlet, power switch, and DIP switches

Kielelezo cha 4.3: Mbele view of the inverter, displaying the AC output socket, the main power switch, LED indicators, and DIP switches for configuration.

4.5 Mipangilio ya Kubadilisha DIP

The inverter features DIP switches for configuring output frequency and voltage. Refer to the specifications table (Section 7) or the product label for specific settings. Ensure the inverter is powered off before adjusting DIP switches.

  • Masafa ya Kutoa: Select 50 Hz or 60 Hz based on your regional requirements.
  • Pato Voltage: Chagua kiasi cha pato cha AC unachotakatage (e.g., 230VAC for this model).

5. Maagizo ya Uendeshaji

5.1 Kuwasha / Kuzima

After all connections are secure and verified, switch the main power button on the inverter to the 'ON' position. The LED indicators will illuminate to show the inverter's status. To power off, switch the button to 'OFF'. A remote control terminal is also available for external ON/OFF control.

5.2 Viashiria vya LED

The 3-color LED indicators provide visual feedback on the inverter's operational status and any potential faults. Consult the product documentation or the specifications table for a detailed explanation of each LED state.

5.3 Njia ya Kuokoa Nguvu

The power saving mode can be adjusted via a variable resistor. This feature helps reduce quiescent current draw when no load or a very light load is connected, conserving battery power.

5.4 Connecting AC Loads

Plug your AC appliances into the inverter's AC output socket. Ensure the total power consumption does not exceed the inverter's continuous power rating (2000W for this model). For inductive loads (e.g., motors, refrigerators), consider their surge power requirements, which can be significantly higher than their running power.

6. Matengenezo

Regular maintenance ensures optimal performance and extends the lifespan of your inverter.

  • Kusafisha: Weka inverter safi na isiyo na vumbi. Tumia kitambaa kikavu kufuta sehemu ya nje. Usitumie visafishaji vya kioevu.
  • Uingizaji hewa: Periodically check that the cooling fan and ventilation openings are clear of obstructions.
  • Viunganisho: Inspect all DC and AC connections regularly to ensure they are tight and free from corrosion. Loose connections can cause overheating and poor performance.
  • Matengenezo ya Betri: Follow the manufacturer's recommendations for your battery bank's maintenance.

7. Utatuzi wa shida

If the inverter is not functioning correctly, refer to the following common issues and solutions:

  • Hakuna Nguvu ya Kutoa:
    • Check DC input connections and battery voltage.
    • Verify the inverter's power switch is ON.
    • Check for blown DC input fuses (if applicable).
  • Kiashiria cha Upakiaji:
    • Reduce the total load connected to the inverter.
    • Disconnect and reconnect the load to reset the inverter.
  • Over Temperature Indication:
    • Ensure adequate ventilation around the inverter.
    • Check if the cooling fan is operating.
    • Reduce the load if operating in a hot environment.
  • Batri ya chini Voltage Alarm/Shutdown:
    • Recharge the battery bank.
    • Check battery connections for looseness or corrosion.

For persistent issues, contact COTEC customer support.

8. Vipimo

The following table details the technical specifications for the COTEC SP2000 series, with specific values for the SP2000-224 model highlighted where applicable.

Table of technical specifications for COTEC SP-2000 series inverters

Kielelezo cha 8.1: Detailed technical specifications for the COTEC SP-2000 series, including the SP2000-224 model.

General Specifications (COTEC SP2000-224)
KipengeleVipimo
ChapaCOTEK
Jina la MfanoSP2000 (SP2000-224 variant)
Nguvu Iliyokadiriwa2000W
Surge Power (1 Sec)4000W
Ingizo la DC Voltage24VDC (Operating Range: 21.0-33.0VDC)
Pato la AC Voltage230VAC (selectable)
Mzunguko wa Pato50/60 Hz (inayoweza kuchaguliwa)
Pato la MawimbiPure Sine Wave (THD<3% at nominal load)
Ufanisi (Upeo)93%
KupoaTemperature & load controlled fan
Joto la Uendeshaji-20°C hadi +40°C
Joto la Uhifadhi-30°C hadi +70°C
Vipimo (W x H x D)Inchi 17.44 x 9.76 x 3.27 (443 x 248 x 83 mm)
Uzito wa Kipengee1 pounds (approximate, actual unit weight may vary)
Vipimo vya KifurushiInchi 19 x 12 x 6
VyetiE13, UL, CE, FCC approved

8.1 Michoro ya Mitambo

For detailed physical dimensions and mounting information, refer to the mechanical drawings below.

Mechanical drawings with dimensions for COTEC SP-2000 series inverter

Kielelezo cha 8.2: Mechanical drawings providing precise dimensions for installation planning.

9. Udhamini na Msaada

COTEC products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official COTEC webtovuti. Weka risiti yako ya ununuzi kama dhibitisho la ununuzi kwa madai ya udhamini.

Nyaraka Zinazohusiana - SP2000-224

Kablaview Mwongozo wa Mtumiaji wa Kibadilishaji cha Mawimbi Safi ya Sinai cha COTEK SE Series (200W, 350W, 400W)
Mwongozo kamili wa mtumiaji wa Vibadilishaji vya Mawimbi ya Sine ya COTEK SE Series Pure Sine, vinavyohusu modeli za 200W, 350W, na 400W. Mwongozo huu unatoa taarifa za kina kuhusu tahadhari za usalama, vipengele vya bidhaa, vipimo vya umeme, taratibu za usakinishaji, uendeshaji, matengenezo, utatuzi wa matatizo, na maelezo ya udhamini.
Kablaview COTEK SK120, SK200, SK350 Series Pure Sine Wave Inverter Mwongozo wa Mtumiaji
Mwongozo huu wa mtumiaji hutoa maelezo ya kina juu ya vibadilishaji vibadilishaji mawimbi vya COTEK SK120, SK200, na SK350, vinavyofunika usalama, vipengele, usakinishaji, uendeshaji, utatuzi na udhamini.
Kablaview Mwongozo wa Mtumiaji wa Kibadilishaji cha Mawimbi Safi ya Sinai cha COTEK SK Series
Mwongozo kamili wa mtumiaji wa COTΕK SK Series Pure Sine Wave Inverter, unaohusu usalama, vipengele, vipimo, usakinishaji, uendeshaji, utatuzi wa matatizo, na udhamini.
Kablaview COTEK SK Series Mwongozo wa Mtumiaji wa Pure Sine Wave Inverter
Mwongozo kamili wa mtumiaji wa Vibadilishaji vya Mawimbi ya Sine ya COTEK SK Series Pure Sine, unaohusu maagizo ya usalama, vipengele, vipimo, usakinishaji, uendeshaji, utatuzi wa matatizo, na taarifa za udhamini.
Kablaview Kibadilishaji cha COTEK SR-1600 PLUS cha Kuweka Raki cha Kuweka Sine Wimbi Safi: Utangulizi wa Haraka
mafupi juuview ya vibadilishaji vya COTEK SR-1600 PLUS mfululizo vya COTEK SR-1600 PLUS vya wimbi safi la sine linalowekwa kwenye raki, maelezo ya kina, mwonekano wa bidhaa, usakinishaji, na taarifa za udhamini.
Kablaview Mfululizo wa COTEK SPT Kibadilishaji cha Wimbi Safi cha Sine kilicho na Swichi ya Uhamisho - Utangulizi wa Bidhaa na Maelezo
mafupi juuview ya Mfululizo wa COTEK SPT Vibadilishaji vya Wimbi Safi vya Sine vyenye Swichi ya Uhamisho, vinavyoelezea maelezo yao ya kiufundi, mwonekano wa bidhaa, miongozo ya usakinishaji na maelezo ya udhamini kwa miundo mbalimbali.