Prime TNOREM02

Kidhibiti cha Mbali cha Nje cha Prime TNOREM02 chenye Soketi 2 na Mwongozo wa Mtumiaji wa Kisambaza Sauti Bila Waya

Model: TNOREM02

Utangulizi

The Prime TNOREM02 is an outdoor remote control system designed to provide convenient wireless operation for two grounded electrical devices. It includes a receiver unit with two 3-prong grounded outlets and a wireless transmitter (remote control) for switching connected devices on and off from a distance. This manual provides essential information for the safe and effective use of your Prime TNOREM02.

Prime TNOREM02 Outdoor Remote Control with Receiver and Transmitter

Image: The Prime TNOREM02 outdoor remote control system, showing the receiver unit with its power cord and the compact wireless transmitter.

Taarifa za Usalama

Tafadhali soma na uelewe maagizo yote ya usalama kabla ya kutumia bidhaa hii. Kukosa kufuata maagizo haya kunaweza kusababisha mshtuko wa umeme, moto au majeraha makubwa.

Yaliyomo kwenye Kifurushi

Thibitisha kuwa vipengee vyote vipo kwenye kifurushi:

Prime TNOREM02 Product Packaging

Image: The Prime TNOREM02 product packaging, showing the receiver and remote control clearly visible through the clear plastic.

Vipengele vya Bidhaa

Close-up of Prime TNOREM02 Receiver Outlets

Picha: Karibu view of the Prime TNOREM02 receiver unit, highlighting the two 3-prong grounded outlets.

Sanidi

  1. Chagua Mahali: Choose a suitable outdoor location for the receiver unit. Ensure it is protected from direct heavy rain and positioned where its outlets face downwards.
  2. Chomeka Kipokeaji: Connect the receiver unit's grounded plug into a standard 3-prong outdoor electrical outlet.
  3. Unganisha Vifaa: Plug the devices you wish to control into the two grounded outlets on the receiver unit. Ensure the total wattagNguvu ya vifaa vilivyounganishwa haizidi Wati 1875.
  4. Andaa Kisambazaji: The CR2032 3V button-cell battery is pre-installed in the wireless transmitter. If the remote does not respond, check the battery.
Prime TNOREM02 Outdoor Remote Control in Use

Image: The Prime TNOREM02 receiver unit installed outdoors, connected to two green extension cords, with a hand holding the remote control to operate connected lights.

Maagizo ya Uendeshaji

Using the Prime TNOREM02 is straightforward:

Matengenezo

The Prime TNOREM02 requires minimal maintenance. The primary maintenance task is replacing the battery in the wireless transmitter.

Replacing the Transmitter Battery:

  1. Locate the battery compartment on the back of the wireless transmitter.
  2. Using a small screwdriver or coin, carefully open the battery compartment cover.
  3. Remove the old CR2032 3V button-cell battery.
  4. Insert a new CR2032 3V button-cell battery with the positive (+) side facing up.
  5. Badilisha kifuniko cha sehemu ya betri kwa usalama.
  6. Test the remote control to ensure it is functioning correctly.

Periodically inspect the receiver unit and its cords for any signs of damage, wear, or corrosion. Discontinue use if any damage is observed.

Kutatua matatizo

TatizoSababu inayowezekanaSuluhisho
Devices do not turn ON/OFF.
  • Transmitter battery is dead or incorrectly installed.
  • Receiver is not plugged in or not receiving power.
  • Devices plugged into receiver are not switched ON or are faulty.
  • Receiver is out of range of the transmitter.
  • Ulinzi wa mzigo kupita kiasi umeanzishwa.
  • Replace the CR2032 battery in the transmitter, ensuring correct polarity.
  • Verify the receiver is securely plugged into a working outdoor outlet.
  • Ensure connected devices are in the ON position (if applicable) and functional.
  • Move closer to the receiver unit. Reduce obstructions between the transmitter and receiver.
  • Unplug devices, wait a few minutes, then plug them back in. Reduce the total load.
Masafa ya pasiwaya yaliyopunguzwa.
  • Vizuizi kati ya kisambazaji na kipokeaji.
  • Weak transmitter battery.
  • Kuingilia kati kutoka kwa vifaa vingine visivyo na waya.
  • Relocate the receiver or transmitter to minimize obstructions.
  • Badilisha betri ya kisambazaji.
  • Move the unit away from other strong wireless signals.
Unit stopped working after a period of use.
  • Kushindwa kwa sehemu ya ndani.
  • Exposure to extreme weather conditions (e.g., direct lightning strike).
  • Overload damage.
  • If basic troubleshooting fails, the unit may require replacement.
  • Ensure the unit is installed in a location that offers reasonable protection from severe weather.
  • Verify connected devices do not exceed the maximum electrical rating.

Vipimo

KipengeleMaelezo
Nambari ya MfanoTNOREM02
ChapaMkuu
Idadi ya maduka2 (3-prong grounded)
Aina ya WayaSJTW 14/3 Gauge
Aina ya programu-jaliziRight Angle, Grounded
MatumiziNje
Max Watts1875 Watts
Max Amps15 Amps
Max Volts125 Volts
Max Horsepower1 / 3 HP
Rangi zisizo na wayaHadi futi 80
Betri ya TransmitterCR2032 3V Button-Cell
Vipimo vya BidhaaInchi 8 x 6.2 x 2.1 (kadirio)
Uzito wa Kipengee0.01 ounces (for remote control)
Teknolojia ya UunganishoBluetooth
VyetiNot explicitly detailed, but designed for outdoor electrical use.

Udhamini na Msaada

Specific warranty information for the Prime TNOREM02 is not provided in the available product details. For warranty claims or technical support, please contact Prime customer service directly. Retain your proof of purchase for any warranty inquiries.

For further assistance, refer to the official Prime webtovuti au wasiliana na njia zao za usaidizi kwa wateja.

Nyaraka Zinazohusiana - TNOREM02

Kablaview PRIME SmartOutlets + Mwongozo wa Mtumiaji wa Udhibiti wa Mbali na Taarifa za Udhibiti
Mwongozo kamili wa PRIME SmartOutlets + Kidhibiti cha Mbali, unaohusu usanidi, usawazishaji upya, udhamini, na kufuata sheria za FCC/IC. Jifunze jinsi ya kutumia na kutatua matatizo ya vifaa vyako mahiri vya nyumbani.
Kablaview PRIME 2 Outlet Wall Tap with USB Chargers - User Guide and Warranty
Detailed instructions, regulatory information, and warranty details for the PRIME 2 Outlet Wall Tap with USB Chargers (Model USB05) from Prime Wire & Cable, Inc.
Kablaview Taarifa za Usakinishaji na Usalama wa PRIME SmartOutlets
Maagizo ya usakinishaji, taarifa za usalama, na vipimo vya plagi mahiri za nje zinazodhibitiwa kwa mbali za PRIME SmartOutlets. Inajumuisha mwongozo wa usanidi, muunganisho wa programu, na utiifu wa kanuni.
Kablaview Prime EZ-Set Indoor Digital Timer TNIDP12: User Manual and Programming Instructions
User manual and instructions for the Prime EZ-Set Indoor Digital Timer (Model TNIDP12). Learn how to program custom on/off times, use preset options, countdown features, and understand safety guidelines and warranty information.
Kablaview PRIME EZ-SET 24-HOUR DIGITAL TIMER (Model #TNIDEZ1) - Instruction Manual
Instruction manual for the PRIME EZ-SET 24-HOUR DIGITAL TIMER (Model #TNIDEZ1), covering programming, features, troubleshooting, safety, specifications, and warranty information.
Kablaview PRIME LEDWLRHH02 Mwongozo wa Mmiliki wa Taa ya Kazi ya Taa ya Taa ya Juu ya LED Inayoweza Kuchajiwa
Mwongozo wa mmiliki wa taa ya kazi ya LED ya PRIME LEDWLRHH02 inayoweza kuchajiwa tena. Hutoa maelekezo ya kuanza, uendeshaji, kusafisha, matengenezo, utatuzi na maelezo ya udhamini.