Mwongozo wa Mtumiaji wa Kisomaji cha Masafa Marefu cha HID iCLASS R90

Utangulizi

This manual provides comprehensive instructions for the installation, operation, and maintenance of the HID iCLASS R90 Long Range Reader (Model: 940NTNTEK00000). The R90 is designed for secure and reliable long-range identification in various access control applications. It supports iCLASS SE, standard iCLASS, Wiegand, and terminal configurations, operating with a 32-bit output and standard 1-second read time, without proximity functionality.

Kielelezo cha 1: Mbele view of the HID iCLASS R90 Long Range Reader. This image shows the device's sleek black casing, a prominent red light bar along the top edge indicating operational status, and the subtle, embossed HID logo near the bottom center. The reader has a textured matte finish.

Taarifa za Usalama

Please read all safety instructions carefully before installing or operating the device. Failure to follow these instructions may result in injury, damage to the device, or voiding of the warranty.

Ensure power is disconnected before performing any installation or maintenance.
Ni wafanyakazi waliohitimu pekee wanaopaswa kusakinisha na kuhudumia vifaa hivi.
Usiweke kifaa kwenye joto kali, unyevunyevu au jua moja kwa moja.
Epuka kuweka kifaa karibu na sehemu zenye nguvu za sumakuumeme.
Tumia vifaa vya ziada na vifaa vya umeme vilivyoidhinishwa na mtengenezaji pekee.

Yaliyomo kwenye Kifurushi

Thibitisha kuwa vipengee vyote vipo kwenye kifurushi kabla ya kuendelea na usakinishaji:

1 x HID iCLASS R90 Long Range Reader (Model: 940NTNTEK00000)
1 x Installation Guide (Printed or Digital)
Mounting Hardware (Screws, anchors, etc.)

Kuweka na Kuweka

Ufungaji sahihi ni muhimu kwa utendaji bora. Fuata hatua hizi kwa makini:

Uteuzi wa Tovuti: Choose a mounting location that provides clear line-of-sight to the intended read area and is protected from severe weather conditions if installed outdoors.
Kupachika:
- Secure the mounting bracket (if applicable) to the wall or pole using the provided hardware.
- Attach the R90 reader to the mounting bracket, ensuring it is firmly in place.
Wiring:
- Connect the reader's wiring harness to the access control panel according to the wiring diagram provided in the separate installation guide. Pay close attention to power (VDC), ground (GND), data lines (Data 0, Data 1), and LED control lines.
- Hakikisha miunganisho yote ni salama na imetengwa.
Washa: Apply power to the access control system. The reader's indicator light should illuminate, typically red or green, indicating power and readiness.

Maagizo ya Uendeshaji

The HID iCLASS R90 reader operates by reading iCLASS credentials presented within its read range. The operational status is indicated by the integrated LED.

Credential Presentation: Present a compatible iCLASS credential (card, fob, etc.) within the reader's effective read range. The optimal range will vary based on environmental factors and credential type.
Mwanga wa Kiashirio:
- Nyekundu: Indicates power is applied and the reader is in standby mode.
- Green (or flashing): Indicates a successful read and data transmission to the access control panel.
- Kumbuka: Specific LED behavior may be configurable via the access control system.
Usambazaji wa Data: Upon a successful read, the reader transmits the credential data to the connected access control panel via the Wiegand interface. The panel then processes the data to grant or deny access.

Matengenezo

The HID iCLASS R90 reader is designed for minimal maintenance. Regular cleaning and inspection can help ensure long-term reliability.

Kusafisha:
- Gently wipe the reader's surface with a soft, damp kitambaa.
- Usitumie visafishaji abrasive, vimumunyisho, au kemikali kali.
- Hakikisha hakuna kioevu kinachoingia kwenye kifaa.
Ukaguzi: Periodically check the mounting and wiring connections for any signs of wear, corrosion, or loosening.
Sasisho za Firmware: Consult your access control system administrator or HID support for information on available firmware updates, which may improve performance or add features.

Kutatua matatizo

If you encounter issues with your HID iCLASS R90 reader, refer to the following common problems and solutions:

Tatizo	Sababu inayowezekana	Suluhisho
Reader not powering on (no LED light)	No power supply; faulty wiring; damaged reader.	Check power connections and source. Verify wiring to the access control panel. If issues persist, contact support.
Reader not reading credentials	Incompatible credential; credential too far; interference; faulty reader.	Ensure credential is iCLASS compatible. Present credential closer to the reader. Check for nearby metallic objects or strong RF sources. Test with a known good credential.
Reader reads, but access is denied	Access control panel issue; credential not enrolled; incorrect permissions.	Verify credential enrollment in the access control system. Check user permissions and time schedules. Consult the access control panel's manual.

If the problem persists after attempting these solutions, please contact HID Global technical support.

Vipimo

Key technical specifications for the HID iCLASS R90 Long Range Reader:

Nambari ya Mfano: 940NTNTEK00000
Chapa: KUJIFICHA
Mtengenezaji: HID Global
Maelezo: R90 ICLS SE, STD, WG, TERM, BLK, NO PRX, 32BITI, STD SEKUNDE 1
Vipimo vya Kifurushi: Inchi 15.8 x 15 x 2.8 (sentimita 40.13 x 38.1 x 7.11)
Uzito wa Kipengee: Pauni 4.59 (kilo 2.08)
UPC: 639399038402
Utangamano: iCLASS SE, standard iCLASS credentials
Pato: Wiegend (32-bit)
Vipengele: Long Range, No Proximity Functionality

Udhamini na Msaada

For warranty information, technical support, or service requests, please contact HID Global directly or refer to their official website. Keep your purchase receipt and product model number (940NTNTEK00000) readily available when contacting support.

HID Global Official Webtovuti: www.hidglobal.com

	Mwongozo wa Mtumiaji wa Programu ya HID Reader (iOS) - Dhibiti Visomaji vya Kudhibiti Ufikiaji Gundua Mwongozo wa Mtumiaji wa Programu ya HID Reader ya iOS. Pata maelezo kuhusu jinsi ya kusakinisha, kusanidi na kudhibiti visomaji vya HID Signo na iCLASS SE, kusasisha programu dhibiti, na kutatua masuala ya kawaida kwa usalama ulioimarishwa wa udhibiti wa ufikiaji.
	Mwongozo wa Usakinishaji wa HID iCLASS SE R90 Mwongozo huu wa usakinishaji unatoa maagizo ya kina kwa kisomaji kisichogusa cha HID iCLASS SE R90, ikijumuisha orodha ya vipuri, vipimo vya kiufundi, michoro ya nyaya, taratibu za kupachika, na vipengele vya hiari kwa mifumo ya udhibiti wa ufikiaji.
	Mwongozo wa Mtumiaji wa Kisomaji cha Baiometri cha HID Signo 25B Mwongozo wa mtumiaji wa Kisomaji cha Biometriki cha HID Signo 25B, kinachoelezea vipimo vya maunzi, nyaya za nyaya, miunganisho ya mfumo, taratibu za uandikishaji wa alama za vidole, na kamusi ya maneno.
	HID iCLASS SE Express R10 Reader Installation Guide This document provides a comprehensive guide for the installation of the HID iCLASS SE Express R10 Reader, covering supplied parts, specifications, installation steps, and optional features.
	Mwongozo wa Wasomaji wa HID Signo: Kuelewa Nambari za Sehemu Mwongozo wa kuelewa nambari za sehemu za visomaji vya HID Signo, unaofafanua maana ya misimbo tofauti ya mtindo, chaguo za vitufe na uoanifu wa teknolojia.
	HID OMNIKEY Mwongozo wa Usakinishaji wa Kisomaji Kadi Mahiri \| Mifano 1021-6121 Mwongozo wa usakinishaji wa Wasomaji wa Kadi mahiri wa HID OMNIKEY, mifano ya kufunika 1021, 3021, 3121, 5021, 5022, 5023, 5025, 5027, 5127, 5421, 5422, 5427, na 6121 hatua za usakinishaji na maelezo.

HID 940NTNTEK00000