GM Lighting LumenTask X8-120-WH Xenon Undercabinet Fixture User Manual

1. Bidhaa Imeishaview

The GM Lighting LumenTask X8-120-WH is an 8-inch, 120V Xenon undercabinet fixture designed to provide high-intensity, low-maintenance lighting. It features a sleek white finish and a tempered frosted prismatic glass lens for optimal light distribution. The fixture includes an anodized aluminum reflector for maximum illumination and a Hi-Low-Off switch for adjustable lighting levels. Its unique 'Open Wide' hinged system allows for hands-free re-lamping and maintenance.

Sifa Muhimu:

8 inches long x 4.75 inches wide x 1.375 inches high.
Includes one (1) 35W G9 base 120V Xenon lamp.
White finish with tempered frosted, prismatic glass lens.
Hi-Low-Off switch for full or 50% lighting level.
UL rated for dry, indoor locations.
Anodized aluminum reflector for maximum light distribution.
'Open Wide' hinged system for easy access and maintenance.

2. Taarifa za Usalama

Please read and understand all instructions before installing or operating this fixture. Failure to follow these instructions may result in electric shock, fire, or other hazards.

ONYO: Hatari ya mshtuko wa umeme. Kata umeme kwenye fyuzi au kivunja mzunguko kabla ya usakinishaji au ukarabati.
Ratiba hii imekusudiwa matumizi ya ndani tu in dry locations. Do not expose to water or moisture.
MUHIMU: This fixture requires hardwiring directly to available wiring. An optional CP-6 (72-inch cord and plug) is available for separate purchase if hardwiring is not feasible.
UINGizaji hewa: The fixture must be installed a minimum of 2 inches from the back of the cabinet to allow for proper ventilation and prevent overheating.
Ensure all electrical connections are made in accordance with local codes and ordinances. If you are unsure about wiring, consult a qualified electrician.
Usitumie kifaa hicho kwa kutumia kamba iliyoharibika au ikiwa sehemu ya ndani imeharibika.

3. Yaliyomo kwenye Kifurushi

Thibitisha kuwa vipengele vyote vipo kabla ya kuanza usakinishaji.

1 x LumenTask X8-120-WH Undercabinet Fixture
1 x 35W G9 Base 120V Xenon Lamp
Karatasi ya Maagizo

4. Kuweka na Kuweka

Before installation, ensure power is disconnected at the circuit breaker. This fixture is designed for hardwired installation.

4.1 Fixture Dimensions and Features

Diagram showing the dimensions of the LumenTask X8 undercabinet fixture and key components.

Picha ya 1: This diagram illustrates the overall dimensions of the 8-inch LumenTask fixture, including its length (8 inches), width (4-3/4 inches), and height (1-3/8 inches). It also highlights key features such as the Hi-Low-Off switch, the frosted prismatic glass lens, and the Xenon lamp with an anodized aluminum reflector. A table provides dimensions for other LumenTask models (X8, X16, X24, X32, X40).

4.2 Detailed Component View

Kina kililipuka view of the LumenTask undercabinet fixture components.

Picha ya 2: Hii ya kina view shows the internal and external components of the LumenTask fixture. It points out the ceramic lamp socket, 'Open Wide' wiring compartment, anodized aluminum mirrored reflector, tempered frosted prismatic glass lens, Hi-Low-Off switch, die-cast end caps, multiple vents for cooling, and mounting holes with pre-set screws. It also describes the one-piece, low-profile CRS housing with die-cast ends for stability.

4.3 Accessing the Interior for Wiring

The LumenTask fixture features an 'Open Wide' design for easy access to the wiring compartment without dismounting the fixture. This allows for hands-free wiring and maintenance.

To open, simply depress the wire compartment holding tab.
The wiring compartment cover will swing down and out, staying in position.
Make necessary electrical connections.
Once wiring is complete, snap the cover back into its closed position.
Slide the lens back into place.

Sequence of images showing how to open the wiring compartment, access wiring, and replace the lens.

Picha ya 3: This series of images demonstrates the process of accessing the interior of the LumenTask fixture. It shows how to depress the tab to open the wiring compartment, revealing the internal wiring, and how to slide the lens back into position after maintenance or wiring.

4.4 Kuweka

Identify the mounting holes with pre-set screws on the fixture.
Position the fixture under the cabinet, ensuring the 2-inch ventilation clearance from the back of the cabinet.
Secure the fixture using appropriate screws (not included) through the mounting holes.
Wire mold knock-outs on the end caps are provided for through-wiring multiple units using Lumen Task EZ Connectors (sold separately).

5. Maagizo ya Uendeshaji

Once installed and powered, the LumenTask fixture is ready for operation.

Washa/Zima: Use the integrated Hi-Low-Off rocker switch located on the fixture to turn the light on or off.
Marekebisho ya Mwangaza: The Hi-Low-Off switch also allows you to select between full brightness ('Hi') and 50% brightness ('Low').
Kupunguza: The fixture can be dimmed remotely by a standard incandescent dimmer (sold separately) if connected to a dimmable circuit.

6. Matengenezo

Regular maintenance ensures optimal performance and longevity of your LumenTask fixture.

6.1 Lamp Uingizwaji

The Xenon lamp has a rated average life of 5,000 hours. When replacement is needed:

Ondoa Nguvu: Always turn off power to the fixture at the circuit breaker before replacing the lamp.
Access Interior: Use the 'Open Wide' hinged system to access the lamp compartment (refer to Section 4.3).
Ondoa Old Lamp: Carefully remove the old 35W G9 base Xenon lamp from its ceramic socket. Allow the lamp to cool if it has been recently in use.
Weka Mpya Lamp: Insert a new 35W G9 base 120V Xenon lamp into the socket. Avoid touching the new lamp with bare hands; use a cloth or glove to prevent oil residue.
Funga Ratiba: Close the wiring compartment cover and slide the lens back into place.
Rejesha Nguvu: Rejesha nguvu kwenye kivunja mzunguko.

6.2 Kusafisha

Ensure the fixture is off and cool before cleaning.
Futa nyuso za nje kwa kitambaa laini na kikavu.
Kwa alama za ukaidi, tumia d kidogoamp Sabuni laini, kisha paka kitambaa kikavu.
Do not use abrasive cleaners or solvents, as these can damage the finish or lens.

7. Utatuzi wa shida

If you encounter issues with your LumenTask fixture, refer to the following common problems and solutions:

Tatizo	Sababu inayowezekana	Suluhisho
Nuru haiwashi.	Hakuna nguvu kwa fixture.	Check circuit breaker and wall switch. Ensure all wiring connections are secure.
Mwanga humeta au ni hafifu.	lamp or faulty lamp.	Hakikisha lamp is securely seated. Replace the lamp if it is old or appears faulty.
Fixture gets too hot.	Uingizaji hewa wa kutosha.	Verify that there is at least 2 inches of clearance from the back of the cabinet for proper airflow.
Kitendaji cha kufifisha hakifanyi kazi.	Incompatible dimmer or incorrect wiring.	Ensure an incandescent dimmer is used. Check dimmer wiring.

If troubleshooting steps do not resolve the issue, contact GM Lighting customer support.

8. Vipimo

Vipimo	Maelezo
Nambari ya Mfano	X8-120-WH
Vipimo (L x W x H)	Inchi 8 x 4.75 x 1.38
Uzito wa Kipengee	Pauni 1.15
Voltage	120 Volts
Wattage	35 watts
Aina ya Chanzo cha Mwanga	Xenon (G9 base)
Idadi ya Vyanzo vya Mwanga	1
Joto la Rangi	2900 Kelvin
Maliza Aina	Nyeupe
Nyenzo ya Kivuli	Aluminium, Glasi
Badilisha Aina	Hi-Low-Off Rocker Switch
Njia ya Kudhibiti	Remote (via dimmer)
Matumizi ya Ndani/Nje	Matumizi ya ndani tu
Aina ya Kuweka	Baraza la Mawaziri
Kipengele Maalum	Requires 2-inch minimum clearance for ventilation. Hardwired installation.

9. Udhamini na Msaada

GM Lighting is committed to quality and customer satisfaction. While specific warranty details are not provided in this document, GM Lighting products are designed with durability in mind.

For technical assistance, layout guidance, or installation support, please contact GM Lighting's technical staff. Refer to the product packaging or GM Lighting's official webtovuti kwa maelezo ya sasa ya mawasiliano.

	GM Lighting SHWO Smart Home Outlet: Usakinishaji na Mwongozo wa Kuprogramu Mwongozo wa kina wa kusakinisha na kusanidi GM Lighting SHWO Smart Home Outlet kwa kutumia programu ya LUXcontrol. Inajumuisha vipimo, mahitaji ya mfumo, michoro ya nyaya, na usanidi wa udhibiti wa sauti.
	GM Lighting ILS-WM202-XX Wall Mounted Light Installation Guide Comprehensive installation instructions for the GM Lighting ILS-WM202-XX wall-mounted landscape light. Includes safety warnings, parts list, tools required, and step-by-step guidance for secure and proper setup.
	GM Lighting ILS-D110-XX Maelekezo ya Ufungaji wa Taa za Spot Mwongozo wa kina wa usakinishaji wa taa za mandhari ya GM Lighting's ILS-D110-XX, unaoelezea tahadhari za usalama, zana na sehemu zinazohitajika, na maagizo ya hatua kwa hatua ya mkusanyiko kwa mwanga bora zaidi wa nje.
	Mwongozo wa Ufungaji wa Mwangaza wa GM ILS-D120-XX Mwongozo wa kina wa usakinishaji wa mwangaza wa mazingira wa GM Lighting ILS-D120-XX, usalama unaofunika, sehemu, zana, na usanidi wa hatua kwa hatua wa mwangaza wa nje.
	Mwongozo wa Ufungaji wa Taa za GM ILS-P101-XX Maagizo ya kina ya usakinishaji wa Taa za Njia ya GM Lighting's ILS-P101-XX, inayofunika tahadhari muhimu za usalama, zana na sehemu zinazohitajika, na mwongozo wa hatua kwa hatua wa usanidi na uendeshaji sahihi wa mipangilio ya taa ya mandhari.
	Taa ya GM ILS-D100-XX Maagizo ya Ufungaji wa Mwanga wa Spot Mwongozo wa kina wa usakinishaji wa GM Lighting ILS-D100-XX Spot Light, unaoeleza kwa kina tahadhari za usalama, zana na sehemu zinazohitajika, na mkusanyiko wa hatua kwa hatua kwa mwangaza wa mandhari ya nje.

GM Lighting X8-120-WH