Mwongozo wa Maelekezo ya Redio ya Gari ya WFLY X9 RC

1. Utangulizi

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your WFLY X9 RC Car Radio system. The WFLY X9 is a high-performance 2.4GHz 9-channel radio transmitter designed for precise control of various RC vehicles, including cars, boats, tanks, and robots. It features advanced technology such as a capacitive touch screen, GPS support, and extensive model memory.

2. Bidhaa Imeishaview

2.1 Sifa Muhimu

• 3.5-inch capacitive touch color screen for intuitive control.
• 9-channel RC radio with a compact RG206S receiver.
• External foldable antenna and LED RGB strip light.
• Supports GPS and external Gyro functions, ideal for racing cars and stunt cars.
• 40 models memory storage and MOA (Motor On Axle) function for crawlers.
• Voice broadcast support.
• USB online upgrade capability.
• Type-C charging for 1S LiPo battery.

2.2 Ni nini kwenye Sanduku

• WFLY X9 Transmitter
• RG206S Receiver

Vipengele 2.3 vya Bidhaa

Figure 1: The WFLY X9 RC Transmitter and its accompanying RG206S Receiver. The transmitter features a pistol-grip design with a steering wheel and a screen on top, while the receiver is a small, rectangular unit with multiple ports.

Kielelezo cha 2: Maelezo ya kina view of the RG206S Receiver, showing its channel ports (1-6), external voltage detection port (Ext. Volt), GPS port, and W.BUS port. A 'SET' button is also visible for binding and configuration.

Figure 3: The 3.5-inch capacitive touch screen interface of the WFLY X9 transmitter. The screen displays various parameters such as timer, RX voltage, juzuu ya njetage, speed, and channel outputs (CH1, CH2, CH3). Menu, Lock, and User menu buttons are visible on the screen.

Figure 4: Illustration of the servo channel limit function. This feature allows setting the servo angle to prevent mechanical damage by ensuring servo output remains within the mechanical travel limits of the connected component.

3. Kuweka

3.1 Ufungaji wa Betri ya Transmitter

1. Locate the battery compartment on the bottom of the WFLY X9 transmitter.
2. Fungua kifuniko cha sehemu ya betri.
3. Insert either a 1S LiPo battery or four AA dry batteries, ensuring correct polarity.
4. Funga kifuniko cha sehemu ya betri kwa usalama.

Note: The transmitter supports a working voltage mbalimbali ya 3.5V hadi 6.0V.

3.2 Muunganisho wa Mpokeaji

1. Connect the RG206S receiver to your RC vehicle's electronic speed controller (ESC) and servos.
2. Ensure that the channels (CH1-CH6) on the receiver correspond to the correct functions (e.g., steering, throttle) on your vehicle.
3. If using GPS or external voltage detection, connect the respective modules to the 'GPS' and 'Ext. Volt' ports on the receiver.

Note: The receiver supports a working voltage mbalimbali ya 3.5V hadi 9.0V.

3.3 Utaratibu wa Kufunga

To establish communication between the transmitter and receiver, a binding process is required:

1. Zima kisambaza data na kipokeaji.
2. Press and hold the 'SET' button on the RG206S receiver while powering it on. The receiver's LED indicator will flash rapidly, indicating it is in binding mode.
3. Turn on the WFLY X9 transmitter.
4. Navigate to the binding menu on the transmitter's touch screen (refer to the on-screen interface for specific steps).
5. Initiate the binding process from the transmitter.
6. Once binding is successful, the receiver's LED indicator will turn solid, and the transmitter will display a successful connection message.
7. Turn off both devices and then power them on normally to confirm the connection.

4. Uendeshaji

4.1 Vidhibiti vya Msingi

• Gurudumu la Kuongoza: Controls the left/right direction of your RC vehicle.
• Kichochezi cha Throttle: Vuta ili kuharakisha mbele, kusukuma ili kusimamisha breki au kurudi nyuma.
• Trimu: Adjust the neutral position of steering and throttle channels for fine-tuning.
• D/R (Dual Rate): Adjusts the maximum throw of steering or other channels.

4.2 Urambazaji wa Skrini ya Kugusa

The WFLY X9 features a 3.5-inch capacitive touch screen for easy navigation and configuration. Tap icons and menus to access various settings:

• Skrini Kuu: Displays real-time telemetry data such as battery voltage (transmitter and external), signal strength, and timer.
• Kitufe cha Menyu: Inafikia menyu kuu ya mipangilio.
• Menyu ya Mtumiaji: Customizable shortcuts for frequently used functions.
• Uteuzi wa Mfano: Select from up to 40 stored models, each with its own unique settings.

4.3 Kazi za Juu

• Program Mix: Configure up to 5 custom mixes for complex control scenarios (e.g., 4-wheel steering).
• Utangazaji wa Sauti: Enable voice prompts for telemetry data or system alerts.
• Usaidizi wa GPS: When connected to a compatible GPS module, the system can display real-time speed detection.
• External Gyro Function: Enhance stability and control for racing or stunt applications.
• Channel Limit: Protect your servos and mechanical components by setting maximum travel limits for each channel.

5. Matengenezo

5.1 Kuchaji Kisambazaji

If using a 1S LiPo battery, charge the transmitter via the Type-C USB port. Connect a standard USB charger (not included) to the Type-C port on the transmitter. The screen will indicate charging status.

5.2 Kusafisha na Kuhifadhi

• Wipe the transmitter and receiver with a soft, dry cloth. Avoid using harsh chemicals or solvents.
• Store the system in a cool, dry place, away from direct sunlight and extreme temperatures (-10℃ to +60℃ operating temperature).
• Remove batteries from the transmitter if storing for extended periods to prevent leakage.

5.3 Sasisha Programu dhibiti

The WFLY X9 supports USB online firmware upgrades. Visit the official WFLY website for the latest firmware versions and instructions. Connect the transmitter to your computer via a USB cable to perform the upgrade.

6. Utatuzi wa shida

6.1 Masuala ya Kawaida

7. Vipimo

7.1 Transmitter (WFLY X9)

• Kufanya kazi Voltage: 3.5V~6.0V (1S LiPo battery / 4×AA dry battery)
• Kazi ya Sasa: 260 ~ 400mA
• Kuruka Mara kwa Mara: FHSS
• Urekebishaji: LORA
• Maombi: RC cars, boats, tanks, robots, etc.
• Azimio: 4096
• Mkanda wa Mara kwa mara: GHz 2.4 (njia mbili)
• Nguvu ya Usambazaji: ≤100mw
• Masafa: >600m (ideal conditions)
• Halijoto ya Uendeshaji: -10 ℃ hadi +60 ℃
• Simulator Interface: 3.5mm (PPM)
• Hifadhi: Kumbukumbu ya mifano 40
• Program Mix: 5 mifano
• Utangazaji wa Sauti: Msaada
• Inachaji: Support 1S LiPo battery (Type C)
• Lugha: Kiingereza
• Boresha: USB online upgrade
• Huduma: Msaada
• Onyesha: 3.5” 480*320 capacitive touch screen
• Vipimo: Approximately 33.5 x 22.0 x 12.5 mm (Transmitter body, not including wheel/handle)
• Uzito: 318g

7.2 Receiver (RG206S)

• Jina la Mfano: RG206S
• Vituo: 6 channels (PWM)
• Kazi ya Sasa: 95mA
• Mkanda wa Mara kwa mara: 2.4GHz (two-way transmission)
• Kufanya kazi Voltage: 3.5V~9.0V
• Urekebishaji: LORA
• GPS: Support speed detection
• Maombi: RC cars, boats, tanks, robots, etc.
• Azimio: Full channel 4096
• Halijoto ya Uendeshaji: -10 ℃ hadi +60 ℃
• Juzuu ya njetage Ugunduzi: DC 1~36V
• PPM: Support 180/270°
• W.BASI: Support S.BUS
• Boresha: USB online upgrade
• Vipimo: 33.6 x 22.3 x 12.3 mm
• Uzito: 7.6g

7.3 Vipimo vya Kimwili

• Product Dimensions (Transmitter): 8 x 6.5 x 4.7 inches (approximate, from product specifications)
• Item Weight (Total): Pauni 1.54

8. Udhamini na Msaada

Specific warranty information for the WFLY X9 RC Car Radio is not provided in this manual. Please refer to the product packaging or the retailer's webtovuti kwa maelezo ya udhamini.

For technical support, troubleshooting assistance beyond this manual, or inquiries regarding parts and service, please contact the seller or the official WFLY customer support channels. Keep your purchase receipt as proof of purchase for any warranty claims.