Mwongozo wa Mtumiaji wa Kisambazaji cha Ukuta cha Gira eNet System 55 5333100 Bila Waya

1. Utangulizi

Welcome to the user manual for the Gira eNet System 55 5333100 Wireless Wall Transmitter. This document provides essential information for the safe and efficient operation of your device. Please read it thoroughly before installation and use.

The Gira eNet wireless wall transmitter is designed to send control commands (switching, dimming, blind, and scene functions) to compatible eNet radio receivers. It offers a flexible solution for expanding existing switch combinations without extensive wiring.

2. Bidhaa za Bidhaa

• Wireless transmission of switching, dimming, blind, and scene commands.
• Easy expansion of existing switch systems.
• Flexible installation: can be screwed to the wall or glued onto smooth surfaces using base plate 5339 00 (sold separately).
• Adjustable rocker function for channel or scene control.
• Two-color LEDs for status signaling.
• Battery-powered operation.
• Programmable functions via eNet server, including software updates, deactivatable transmission status signaling, programmable master dimmer function, all-on/all-off scenes, and individual scene thresholds.

Picha hii inaonyesha mbele view of the Gira eNet System 55 5333100 Wireless Wall Transmitter. It features three distinct rocker switches, each with a clear, pure white finish. Small, circular metallic accents are visible on the left and right sides of each rocker, indicating potential mounting points or LED indicators. The design is minimalist and integrated, suitable for modern interiors.

3. Kuweka na Kuweka

Kufungua: Carefully remove the wireless wall transmitter from its packaging. Ensure all components are present.

Chaguzi za Kuweka:

• Screwed Installation: The device can be securely fastened to a wall using appropriate screws. Ensure the mounting surface is stable.
• Ufungaji wa Wambiso: For smooth or transparent surfaces, the transmitter can be affixed using the Gira base plate 5339 00 (not included). Apply the base plate to the desired location, then attach the transmitter.

Uingizaji wa Betri: The device operates on a 3V DC CR 2450N battery. Open the battery compartment, insert the battery with the correct polarity, and close the compartment.

Pairing with eNet Receiver:

• The wireless wall transmitter needs to be paired with a compatible eNet radio receiver.
• Refer to the specific instructions for your eNet radio receiver for the pairing process.
• For advanced configuration and programming, connect to the eNet server. This allows for software updates and customization of functions like master dimmer, scene settings, and LED behavior.

Kumbuka Muhimu:

When using real metal rocker sets and/or real metal frames, there may be a reduction in radio range. Consider this during installation planning.

4. Maagizo ya Uendeshaji

The Gira eNet wireless wall transmitter features three rocker switches, each capable of controlling various functions depending on its configuration.

Operesheni ya Msingi:

• Kubadilisha: Press the top or bottom of a rocker to toggle a connected device (e.g., light) ON or OFF.
• Kupunguza: For dimmable devices, press and hold the top or bottom of a rocker to increase or decrease brightness. Release to set the desired level.
• Blind Control: For blinds or shutters, press the top of a rocker to raise and the bottom to lower. Press again to stop movement.
• Udhibiti wa Scene: If configured for scene control, pressing a rocker can activate a pre-programmed scene (e.g., "Movie Night" scene that dims lights and lowers blinds).

Viashiria vya LED: The two-color LEDs on the left and right of the keys provide visual feedback. Their behavior can be configured via the eNet server.

eNet Server Configuration: For advanced customization, such as adjusting rocker functions (channel vs. scene), setting master dimmer parameters, or defining all-on/all-off scenes, use the eNet server interface.

5. Matengenezo

Kusafisha: Clean the surface of the wireless wall transmitter with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.

Ubadilishaji wa Betri: When the battery is low, the device's LEDs may indicate this (refer to eNet server configuration for specific low battery signals). Replace the CR 2450N battery promptly to ensure continued operation.

• Aina ya Betri: 1 x CR 2450N (3V DC)
• Utupaji: Tupa betri zilizotumiwa kulingana na kanuni za ndani.

Masasisho ya Programu: If connected to an eNet server, ensure the device's software is kept up-to-date for optimal performance and access to new features.

6. Utatuzi wa shida

Kifaa hakijibu:

• Angalia Betri: Ensure the CR 2450N battery is correctly inserted and not depleted. Replace if necessary.
• Masafa: Verify that the wireless wall transmitter is within the effective radio range (approx. 100m in open field) of the eNet radio receiver. Obstacles like thick walls or metal objects can reduce range.
• Kuoanisha: Confirm that the transmitter is correctly paired with the eNet radio receiver. Re-pair if unsure.
• Kuingilia: Check for potential sources of radio interference (e.g., other wireless devices operating on similar frequencies).

Reduced Radio Range:

• Vipengele vya Metali: If using real metal rocker sets or frames, this can reduce radio range. Consider alternative materials or repositioning.
• Vikwazo: Ensure there are no significant physical obstructions between the transmitter and receiver.

Utendaji Si Sahihi:

• eNet Server Configuration: Connect to the eNet server to verify the programmed functions for each rocker. Ensure they match your intended use (e.g., switching, dimming, scene).
• Hali ya Mpokeaji: Check the status of the connected eNet radio receiver.

If problems persist, consult a qualified electrician or contact Gira customer support.

7. Maelezo ya kiufundi

8. Udhamini na Msaada

This Gira product comes with a 2-year manufacturer warranty. Please retain your proof of purchase for warranty claims.

For technical assistance, troubleshooting, or warranty inquiries, please contact Gira customer support or visit the official Gira webtovuti.

Mtengenezaji: Gira

Rejeleo la Mtengenezaji: 5333100

Upatikanaji wa Vipuri: Taarifa haipatikani.