Mwongozo wa Mtumiaji wa Hita ya Ngoma ya BriskHeat DHCS13

1. Bidhaa Imeishaview

The BriskHeat DHCS13 is a standard heavy-duty drum heater designed for metal drums and pails, specifically fitting 30-gallon (114L) containers. This heater provides efficient and uniform heating for various materials, utilizing a robust construction for durability and safety.

Its design incorporates a patented 360-degree grounded multi-stranded heating element, laminated between two extra-thick layers of 20mil fiberglass-reinforced silicone rubber. This construction ensures excellent strength, durability, and uniform heat distribution, meeting NEC 427.23 standards. The unit is moisture and chemical resistant and features an adjustable thermostat for precise temperature control.

BriskHeat DHCS13 Drum Heater wrapped around a black 30-gallon drum

Image 1.1: The BriskHeat DHCS13 drum heater shown installed on a black 30-gallon metal drum. The orange heating bands are visible wrapped around the drum, secured by spring closures.

2. Taarifa za Usalama

Soma maagizo yote kwa makini kabla ya usakinishaji na uendeshaji. Kushindwa kufuata maagizo haya kunaweza kusababisha uharibifu wa mali, jeraha kubwa, au kifo.

Ensure the heater is used only on metal drums and pails as specified. Do not use on plastic drums.
Thibitisha kuwa usambazaji wa umeme ujazotage matches the heater's requirements (120VAC).
Always ensure the heater is properly grounded. The unit includes a standard 3-prong plug (NEMA 5-15) for this purpose.
Do not operate the heater in explosive atmospheres or near flammable vapors unless specifically rated for such environments. This heater is not intrinsically safe.
Avoid direct contact with the heating surface during operation, as temperatures can reach up to 450°F (232°C).
Do not immerse the heater in liquid. It is moisture and chemical resistant, but not submersible.
Ondoa nishati kabla ya kufanya matengenezo au marekebisho yoyote.
Weka kamba ya nguvu mbali na nyuso zenye moto na kingo kali.
Do not modify the heater or its components. Use only genuine BriskHeat replacement parts if necessary.

3. Kufungua na Yaliyomo

Carefully unpack the BriskHeat DHCS13 drum heater from its packaging. Inspect the unit for any signs of shipping damage. If damage is observed, do not proceed with installation and contact your supplier immediately.

Yaliyomo kwenye Kifurushi:

BriskHeat DHCS13 Drum Heater (1 unit)

4. Kuweka na Kuweka

The DHCS13 drum heater is designed for easy installation on 30-gallon metal drums.

Prepare the Drum: Ensure the metal drum is clean and free from any debris or flammable residues on its exterior surface where the heater will be applied.
Weka heater: Wrap the DHCS13 drum heater around the circumference of the 30-gallon metal drum. Position it at the desired height, typically around the lower or middle section of the drum, depending on the material to be heated.
Secure the Heater: The heater features a spring closure mechanism. Expand the spring closure as needed (up to 3 inches / 76mm) to securely fasten the heater around the drum. Ensure the heater fits snugly against the drum surface for optimal heat transfer.
Unganisha Nguvu: Plug the 6ft (1.8m) long power cord with its standard 3-prong plug (NEMA 5-15) into a properly grounded 120VAC electrical outlet. Ensure the outlet is capable of supplying 1000 watts.
Ukaguzi wa Awali: Before setting the temperature, ensure the heater is firmly attached and the power cord is not pinched or in contact with any hot surfaces.

5. Maagizo ya Uendeshaji

The DHCS13 drum heater is equipped with an adjustable thermostat for precise temperature control.

Rekebisha Thermostat: Locate the adjustable thermostat dial on the heater. The thermostat has a temperature range of 50°F to 425°F (10°C to 218°C).
Weka Halijoto Unayotaka: Rotate the dial to set the desired temperature for the contents of the drum. Start with a lower setting and gradually increase if higher temperatures are required.
Fuatilia Upashaji joto: The heater will begin to warm the drum. The thermostat will cycle the heating element on and off to maintain the set temperature.
Ulinzi wa joto kupita kiasi: The maximum exposure temperature on the heating surface is 450°F (232°C). The thermostat will prevent the surface from exceeding this temperature.
Zima umeme: To turn off the heater, unplug it from the power outlet.

Kumbuka: The actual temperature of the drum contents may vary based on ambient temperature, drum material, and the specific properties of the material being heated. It is recommended to monitor the internal temperature of the drum contents, especially for temperature-sensitive materials.

6. Matengenezo

Regular maintenance ensures the longevity and safe operation of your BriskHeat DHCS13 drum heater.

Kusafisha: Disconnect the heater from power before cleaning. Use a damp cloth to wipe down the exterior of the heater. Do not use abrasive cleaners or solvents that could damage the silicone rubber.
Ukaguzi: Periodically inspect the heater for any signs of wear, damage, or fraying of the power cord. Check the integrity of the silicone rubber and the spring closure mechanism.
Hifadhi: When not in use, store the heater in a clean, dry place, away from direct sunlight and extreme temperatures.
Matengenezo: Do not attempt to repair damaged components yourself. Contact BriskHeat customer support or a qualified technician for repairs.

7. Utatuzi wa shida

If you encounter issues with your DHCS13 drum heater, refer to the following common troubleshooting steps:

Tatizo	Sababu inayowezekana	Suluhisho
Heater not warming up.	Hakuna nguvu kwa kitengo. Thermostat imewekwa chini sana. Njia mbaya ya umeme.	Check if the heater is plugged in. Ongeza mpangilio wa thermostat. Jaribu kifaa ukitumia kifaa kingine au ujaribu njia tofauti.
Heater not reaching desired temperature.	Thermostat imewekwa chini sana. Drum contents too cold or large volume. Poor contact with drum surface.	Ongeza mpangilio wa thermostat. Allow more time for heating, or consider additional insulation for the drum. Ensure the heater is snugly secured around the drum.
Mizunguko ya hita huwashwa na kuzima mara kwa mara.	Normal operation (thermostat maintaining temperature). Thermostat sensor issue.	This is typically normal. If cycling is excessive or erratic, contact support.
Visible damage to heater or cord.	Uharibifu wa kimwili.	Immediately disconnect power. Do not use. Contact BriskHeat for repair or replacement.

If the problem persists after attempting these solutions, please contact BriskHeat customer support.

8. Vipimo

Sifa	Thamani
Nambari ya Mfano	DHCS13
Uwezo wa ngoma	30-Gallon (114L) Metal Drums
Voltage	120VAC
Wati	1000W
Thermostat Temperature Range	50°F hadi 425°F (10°C hadi 218°C)
Maximum Exposure Temperature (Heating Surface)	450°F (232°C)
Nyenzo	2-Layer Fiberglass Reinforced Silicone Rubber
Nguvu ya Dielectric	2000V
Vipimo (W x L)	Inchi 4 (102mm) x 58.5in (1496mm)
Diameter (for drum)	inchi 18.6 (473mm)
Urefu wa Kamba ya Nguvu	futi 6 (m 1.8)
Aina ya programu-jalizi	Standard 3-prong (NEMA 5-15)
Kutuliza	Iliyowekwa msingi

9. Udhamini na Msaada

BriskHeat products are manufactured to the highest quality standards. For information regarding product warranty, please refer to the warranty statement provided with your purchase or visit the official BriskHeat webtovuti.

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact BriskHeat customer support:

Mtengenezaji: BriskHeat
Maelezo ya Mawasiliano: Refer to the BriskHeat webtovuti au ufungaji wa bidhaa kwa maelezo ya sasa ya mawasiliano.

	BriskHeat SRL, SRP, SRMU, SRX Mwongozo wa Maagizo ya Mablanketi ya Kupasha Mpira ya Silicone Mwongozo wa kina wa maagizo ya BriskHeat SRL, SRP, SRMU, na blanketi za kupokanzwa za mpira za silicone za mfululizo wa SRX, kufunika usalama, usakinishaji, uendeshaji, matengenezo, na utatuzi wa matatizo. Inajumuisha maelezo na maelezo ya udhamini.
	Mwongozo wa Maagizo ya Mablanketi ya Kupokanzwa kwa Silicone ya BriskHeat Mwongozo wa maagizo wa Mablanketi ya Kupasha Mipira ya BriskHeat Silicone, kufunika usalama, usakinishaji, utatuzi na maelezo ya udhamini. Iliyoundwa kwa Ala za Cole-Parmer na Davis.
	Mwongozo wa Maelekezo ya Mfumo wa Kudhibiti Halijoto ya BriskHeat LYNX™ Mwongozo wa kina wa maagizo ya Mfumo wa Kudhibiti Joto wa BriskHeat LYNX™, unaojumuisha usanidi, uendeshaji, vipimo, utatuzi na maelezo ya udhamini. Jifunze jinsi ya kusakinisha, kusanidi na kuendesha mfumo wako wa LYNX kwa udhibiti bora wa halijoto.
	BriskHeat Wet-Area Full-Coverage Ngoma na Pail Hita \| Mfululizo wa FGDHW FGDIW Gundua Ngoma na Hita za Pail za Maeneo Wet ya BriskHeat (FGDHW \| FGDIW Series). Hita hizi hutoa upinzani wa maji wa IP54, udhibiti wa dijiti rahisi kwa programu, na ujenzi wa kudumu kwa matumizi ya viwandani. View maelezo ya kina na maelezo ya kuagiza.
	Mikanda ya Kupasha joto ya Mpira wa Silicone ya BriskHeat XtremeFLEX® BSO - Karatasi ya data ya Bidhaa Gundua Tepu za Kupasha joto za Mpira wa Silicone za BriskHeat za XtremeFLEX® BSO, zinazoangazia unyevu, kemikali, na upinzani wa mionzi, uimara wa kipekee, na majibu ya haraka ya joto. View vipimo, maelezo ya kuagiza, na chaguzi za mkanda wa wambiso.
	Hita za Kuzamisha za BriskHeat TOTE/IBC - Bidhaa Imeongezwaview Vipimo na vipengele vya kina vya Hita za BriskHeat TOTE TANK/IBC Immersion. Jifunze kuhusu ufanisi wa hali ya juu wa joto, usakinishaji rahisi, udhibiti unaoweza kurekebishwa, voltage, ninitage, urefu wa kuzamishwa, kiwango cha halijoto, na taarifa za mpangilio.

BriskHeat DHCS13