Gewiss GW10701 Programmable Thermostat

1. Utangulizi

This manual provides detailed instructions for the installation, operation, and maintenance of your Gewiss GW10701 Programmable Thermostat. This device is designed to control heating and air conditioning systems, allowing you to manage room temperature efficiently and comfortably. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Taarifa za Usalama

Daima zingatia tahadhari zifuatazo za usalama ili kuzuia jeraha la kibinafsi au uharibifu wa kifaa:

• Ufungaji unapaswa kufanywa tu na wafanyakazi waliohitimu kwa mujibu wa kanuni na kanuni za umeme za eneo husika.
• Disconnect power to the heating/cooling system at the main circuit breaker before installing or servicing the thermostat.
• Usiweke kidhibiti joto kwenye maji au unyevu kupita kiasi.
• Tumia aina maalum ya betri pekee na uhakikishe polarity sahihi wakati wa usakinishaji.
• Weka betri mbali na watoto. Usitupe betri motoni.
• Do not attempt to open or repair the thermostat yourself. Contact qualified service personnel.

3. Bidhaa Imeishaview

The Gewiss GW10701 is a wall-mounted programmable thermostat featuring an LCD display and intuitive controls for temperature management.

Kielelezo cha 1: Mbele view of the Gewiss GW10701 Thermostat. It features a clear LCD screen displaying time and temperature, alongside a circular control panel with directional buttons and a central confirmation button for easy navigation and setting adjustments.

3.1. Vipengele

• Onyesho la LCD: Shows current time, temperature, operating mode, and programming settings.
• Vifungo vya Kudhibiti: Typically include UP/DOWN arrows for temperature adjustment, MODE button for selecting operating modes (e.g., Heat, Cool, Auto, Off), and a SET/PROG button for accessing programming menus. (Note: Specific button functions may vary slightly; refer to on-screen prompts.)
• Sehemu ya Betri: Located on the rear or side, houses the power supply batteries.
• Bamba la kuinua: Kwa ufungaji salama wa ukuta.

4. Ufungaji

4.1. Kuchagua Mahali

Select a central location on an interior wall, approximately 1.5 meters (5 feet) above the floor. Avoid locations near heat sources (lamps, direct sunlight, fireplaces), drafts (windows, doors), or areas with poor air circulation.

4.2. Mounting the Thermostat

1. Ondoa Nguvu: Turn off the power to your heating/cooling system at the main circuit breaker.
2. Separate Base Plate: Carefully detach the front cover of the thermostat from its base plate.
3. Alama na Chimba: Hold the base plate against the wall at your chosen location. Mark the drilling points. Drill holes and insert wall anchors if necessary.
4. Secure Base Plate: Fasten the base plate to the wall using the provided screws.
5. Wiring (if applicable): Connect the system wires to the appropriate terminals on the base plate. Refer to the wiring diagram provided with your heating/cooling system or consult a qualified electrician. Note: While the thermostat is battery-powered, it controls a 230V system. Ensure correct wiring.
6. Sakinisha Betri: Insert the required batteries into the battery compartment, observing correct polarity (+/-).
7. Ambatisha Thermostat: Carefully reattach the thermostat front cover to the base plate, ensuring it clicks securely into place.
8. Rejesha Nguvu: Turn on the power to your heating/cooling system at the main circuit breaker.

5. Uendeshaji

5.1. Usanidi wa Awali

Upon first power-up or after battery replacement, you may need to set the current time and date. Follow the on-screen prompts or refer to the programming section.

5.2. Kuweka Joto

Tumia UP na CHINI arrow buttons to adjust the desired temperature. The display will show the set temperature temporarily, then revert to the current room temperature.

5.3. Njia za Uendeshaji

Bonyeza kwa MODE button (or similar) to cycle through available operating modes:

• JOTO: Thermostat itawasha mfumo wa joto wakati halijoto ya chumba iko chini ya halijoto iliyowekwa.
• BARIDI: The thermostat will activate the air conditioning system when the room temperature rises above the set temperature.
• Otomatiki: The thermostat automatically switches between heating and cooling to maintain the set temperature range.
• BONYEZA: The heating and cooling systems are turned off.

6. Kupanga programu

The Gewiss GW10701 allows you to create custom heating/cooling schedules for different times of the day and days of the week. This feature helps optimize energy consumption and comfort.

6.1. Kuweka Muda na Tarehe

1. Bonyeza kwa WEKA or PROG kitufe cha kuingia kwenye menyu ya mipangilio.
2. Navigate using the arrow buttons to find "Time" or "Date" settings.
3. Use the arrow buttons to adjust the values (hour, minute, day, month, year).
4. Confirm each setting with the WEKA or central button.

6.2. Creating a Program Schedule

The thermostat typically offers daily or weekly programming options. You can set different temperatures for various periods (e.g., Wake, Day, Evening, Sleep).

1. Bonyeza kwa PROG kitufe cha kuingiza modi ya upangaji.
2. Select the day or group of days you wish to program (e.g., Mon-Fri, Sat-Sun, or individual days).
3. For each period (e.g., "Wake"), set the desired start time and temperature using the arrow buttons.
4. Advance to the next period and repeat the process.
5. Save your program and exit programming mode.

Consult the on-screen menu and specific button labels on your device for precise programming steps, as interfaces can vary.

7. Matengenezo

7.1. Kubadilisha Betri

The thermostat is powered by batteries. When the battery indicator appears on the display, replace the batteries promptly to ensure continuous operation. Typically, 2x AA or AAA alkaline batteries are required.

1. Carefully remove the front cover of the thermostat.
2. Ondoa betri za zamani na uzitupe kwa uwajibikaji.
3. Ingiza betri mpya, hakikisha polarity sahihi.
4. Unganisha tena kifuniko cha mbele.

7.2. Kusafisha

Clean the thermostat's exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray cleaners directly onto the device, as this can damage the display or internal components.

8. Utatuzi wa shida

9. Vipimo

• Mtengenezaji: Gewiss
• Nambari ya Mfano: GW10701 (Chorus)
• Vipimo (L x W x H): 13 x 2.3 x 9.2 cm
• Uzito: 9.07 g
• Rangi: Nyeupe
• Nyenzo: Plastiki
• Ugavi wa Nguvu: Inaendeshwa na betri
• Kubadilisha Voltage: 230 Volt (for controlled system)
• Aina ya Kuonyesha: LCD au LED
• Aina ya Kupachika: Imewekwa kwa ukuta
• Vipengele vya Udhibiti: Programmable, Button control
• Matumizi: Heating systems, Air conditioning systems

10. Udhamini na Msaada

For warranty information, technical support, or service inquiries regarding your Gewiss GW10701 Thermostat, please refer to the warranty card included with your product or visit the official Gewiss website. You may also contact your local Gewiss distributor or retailer for assistance.

Gewiss Official Webtovuti: www.gewiss.com