Utangulizi
This manual provides essential information for the safe and effective use of your McCulloch Universal Trimmer Head P25. This trimmer head is part of the Universal range of parts and accessories, powered by McCulloch, designed to work with McCulloch machines and most other brands of lightweight petrol grass trimmers. It includes a pre-loaded spool and line (SPO001) with a 2.0 mm diameter and 4 meters in length.
Taarifa za Usalama
Always read and understand the safety instructions provided with your specific grass trimmer or brush cutter before installing or operating this trimmer head. Failure to follow all instructions may result in serious injury.
- Vaa vifaa vinavyofaa vya kujikinga (PPE), ikijumuisha ulinzi wa macho, ulinzi wa kusikia na viatu imara.
- Ensure the trimmer is turned off and the spark plug cap is removed (for petrol models) before performing any installation, maintenance, or inspection.
- Weka watu walio karibu, hasa watoto na wanyama kipenzi, mbali na eneo la kazi.
- Inspect the trimmer head for any damage before each use. Do not use if damaged.
- Use only genuine replacement parts and accessories recommended by the manufacturer.
Yaliyomo kwenye Kifurushi
The McCulloch Universal Trimmer Head P25 package includes:
- 1 x Universal Trimmer Head P25
- 1 x Pre-loaded 2.0 mm x 4m Trimmer Line (SPO001)
- 5 x Different Adaptors (to fit most lightweight petrol grass trimmers)

Kuweka na Kuweka
The P25 trimmer head is designed for easy installation on a wide range of petrol grass trimmers. It comes with five different adaptors to ensure compatibility.
- Identify the correct adaptor: Consult your trimmer's instruction manual to determine the correct mounting thread size and type for your specific model. Select the adaptor from the provided set that matches your trimmer's shaft.
- Prepare the trimmer: Ensure the trimmer is turned off and cooled down. Disconnect the spark plug wire for safety.
- Remove existing head (if applicable): If an old trimmer head is present, remove it according to your trimmer's manual.
- Install the adaptor: Screw the selected adaptor onto the trimmer's drive shaft. Ensure it is securely tightened.
- Attach the P25 trimmer head: Align the P25 trimmer head with the installed adaptor and screw it on until it is firmly seated. Do not overtighten.
- Thibitisha usakinishaji: Gently tug on the trimmer head to ensure it is securely attached and does not wobble.

Maagizo ya Uendeshaji
The McCulloch Universal Trimmer Head P25 is designed for efficient cutting of short to medium length grass and light bushes.
- Kuanzisha Trimmer: Follow your trimmer's manufacturer instructions for starting the engine.
- Mbinu ya Kupunguza: Hold the trimmer firmly with both hands. Use a sweeping motion to cut grass. Avoid hitting hard objects like rocks, fences, or concrete, as this can damage the line and the trimmer head.
- Uendelezaji wa Mstari: The P25 features an automatic line advancement system. When the line wears down, simply tap the trimmer head lightly on the ground while the engine is running at operating speed. This will release a small amount of new line. The cutting blade on your trimmer's guard will automatically trim the line to the correct length.
- Utendaji Bora: For best results, maintain a consistent engine speed and avoid overloading the trimmer head by trying to cut too much material at once.
Matengenezo
Regular maintenance ensures the longevity and optimal performance of your trimmer head.
- Kusafisha: After each use, clean the trimmer head to remove grass clippings, dirt, and debris. Use a brush or cloth. Do not use harsh chemicals.
- Ubadilishaji wa Mstari: When the pre-loaded line is depleted, replace it with a new spool of 2.0 mm trimmer line, such as the McCulloch SPO001 replacement spool.
- Replacing the Spool:
- Ensure the trimmer is off and the spark plug wire is disconnected.
- Locate the tabs or buttons on the side of the trimmer head. Press them in and pull the cap off.
- Ondoa spool tupu.
- Insert the new pre-wound spool, ensuring the line ends are threaded through the eyelets on the trimmer head casing.
- Replace the cap, ensuring it clicks securely into place.
- Hifadhi: Store the trimmer head in a clean, dry place, away from direct sunlight and extreme temperatures.

Kutatua matatizo
If you encounter issues with your trimmer head, refer to the following common problems and solutions:
| Tatizo | Sababu inayowezekana | Suluhisho |
|---|---|---|
| Line not advancing | Line tangled or fused inside spool; spool empty; incorrect tapping technique. | Remove cap and untangle line, or replace spool. Ensure engine is at operating speed when tapping. |
| Utendaji mbaya wa kukata | Line too short or worn; incorrect line type; cutting too much material at once. | Advance line or replace spool. Ensure line is 2.0 mm diameter. Reduce cutting load. |
| Trimmer head wobbles | Trimmer head not securely attached; incorrect adaptor used. | Ensure trimmer head is tightened correctly. Verify the correct adaptor is installed and secured. |
If problems persist, consult your trimmer's instruction manual or contact the manufacturer's customer support.
Vipimo
| Kipengele | Maelezo |
|---|---|
| Nambari ya Mfano | P25-0057-7615901 |
| Chapa | Universal (Powered by McCulloch) |
| Mstari wa Mstari | 2.0 mm |
| Line Length (pre-loaded) | mita 4 |
| Compatible Spool | SPO001 |
| Vipengee vilivyojumuishwa | Trimmer Head P25, 2.0 mm x 4m Trimmer Line, 5 Adaptors |
| Vipimo vya Bidhaa | 25 x 14 x 6.5 cm |
| Uzito wa Kipengee | 398 g |
| Matumizi Iliyopendekezwa | For cutting grass and light bushes in gardens |





