1. Utangulizi
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Airflow iCon ECO 15 Extractor Fan. Please read these instructions thoroughly before installation and retain them for future reference. The Airflow iCon ECO 15 is a stylish, compact, low-profile fan designed for discreet ventilation in various domestic applications.
2. Taarifa za Usalama
Maagizo Muhimu ya Usalama:
- Ensure the power supply is disconnected before installation, maintenance, or servicing.
- Installation must be carried out by a qualified electrician in accordance with national wiring regulations and local building codes.
- Kifaa hiki hakikusudiwa kutumiwa na watu (pamoja na watoto) walio na uwezo mdogo wa kimwili, hisi au kiakili, au wasio na uzoefu na ujuzi, isipokuwa wamepewa usimamizi au maagizo kuhusu matumizi ya kifaa na mtu anayehusika na usalama wao.
- Watoto wanapaswa kusimamiwa ili kuhakikisha kwamba hawachezi na kifaa.
- Do not install the fan directly above a shower or bath unless it is protected by a suitable enclosure.
- Ensure that the air intake and exhaust vents are not obstructed.
- The fan must not be connected to a chimney flue or any other appliance flue.
3. Bidhaa Imeishaview
The Airflow iCon ECO 15 is a 100mm (4-inch) axial extractor fan featuring an intelligent iris shutter design for efficient and quiet operation. Its low-profile aesthetic integrates seamlessly into modern interiors.
3.1 Sifa Muhimu
- Iris Shutter Technology: Intelligent, award-winning design with a delayed shutter that opens and closes over up to 2 minutes. This avoids unnecessary operation for energy efficiency and prevents unwanted backdraughts.
- Pro ya chinifile Muundo: Discreet and aesthetically pleasing.
- Utofauti wa Moduli: Compatible with various control modules (sold separately) for enhanced functionality.
- Operesheni ya utulivu: Designed for low noise levels.
4. Vipimo
| Vipimo | Thamani |
|---|---|
| Chapa | Mtiririko wa hewa |
| Nambari ya Mfano | iCON ECO 15 |
| Aina ya shabiki | Axial |
| Air Flow (m³/h / l/s) | 69 / 19 |
| Nafasi ya Kuweka | Ukuta / Dari |
| Sound Pressure @ 3m (dB(A)) | 28.8 |
| Nguvu (W) | 9.4 |
| Duct Diameter (mm) | 100 |
| Ugavi Voltage | 230 V / 1ph / 50 Hz |
| Ukadiriaji wa Ulinzi wa Ingress | IPX4 |
| Halijoto ya Juu ya Mazingira (°C) | 40 |
| Uzito (kg) | 0.74 |
| Vipimo H x W x D (mm) | 197 x 197 x 108.5 |
5. Ufungaji
The Airflow iCon ECO 15 fan is designed for installation in walls or ceilings. Always ensure the power supply is isolated before commencing any installation work.
5.1 Miongozo ya Jumla ya Ufungaji
- The fan requires a 110mm diameter hole for installation.
- For wall installations, the hole should be lined with a 100mm internal diameter duct.
- When using flexible ducting, ensure the diameter is maintained throughout the run.
- Ensure all vapor barriers are properly restored after installation.
5.2 Wall Installation (Recessing Fan)
The iCon 15 requires a 110mm diameter hole through the wall. This hole should be lined with a 100mm internal diameter duct.
5.3 Ceiling Installation (Recess)
The fan should be fitted in the hole, secured with the screws provided into the support structure. The iCon 15 requires a 110mm diameter hole through the ceiling.
5.4 Ceiling Installation (Surface Mounting)
When surface mounting, the fan is fitted into the mounting skirt (if supplied). The iCon 15 requires a 110mm diameter hole through the ceiling. When recessing or surface mounting in the ceiling, a plywood support (min. 18mm thick) must be mounted between the ceiling joists. Any fixing screws should be fitted through the plasterboard into this support.
6. Maagizo ya Uendeshaji
The Airflow iCon ECO 15 operates automatically based on its intelligent iris shutter technology. When activated (e.g., by a light switch or an optional control module), the iris shutter will slowly open, and the fan will begin to extract air. Upon deactivation, the fan will continue to run for a set period (if a timer module is installed) before the shutter slowly closes, preventing backdraughts.
6.1 Control Modules (Sold Separately)
The iCon ECO 15 is designed to be upgraded with various 'snap-in' interchangeable control modules to suit specific ventilation needs. These modules offer functionalities such as:
- Basic Switching: Simple on/off operation.
- Kuchelewa Kuanza: Fan starts after a delay.
- Sensor ya unyevu: Activates based on room humidity levels.
- Kitambuzi cha Mwendo: Activates upon detecting movement.
- Pullcord: Manual activation via a pull cord.
- Room Refresh: Periodic ventilation.
- SELV: Usalama Ziada Chini Voltage.
- Kipima muda: Fan runs for a set duration after activation.
- Two Speed: Allows selection between two fan speeds.
- Kasi inayobadilika: Kasi ya shabiki inayoweza kubadilishwa.
Refer to the specific control module's instructions for detailed operating procedures.
7. Matengenezo
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Airflow iCon ECO 15 Extractor Fan.
- Ondoa Nguvu: Always ensure the power supply to the fan is disconnected before performing any maintenance.
- Kusafisha kifuniko: The front cover can be gently wiped with a damp kitambaa na sabuni kali. Epuka cleaners abrasive.
- Kusafisha Vile vya Fani: Carefully remove the front cover (refer to installation instructions for removal). Gently clean the fan blades and internal surfaces with a soft brush or damp kitambaa. Hakikisha unyevu hauingii kwenye vipengele vya umeme.
- Kukusanya upya: Once clean and dry, reassemble the fan cover, ensuring it is securely fitted.
- Mara kwa mara: Cleaning should be performed periodically, depending on the environment and usage, typically every 3-6 months.
8. Utatuzi wa shida
If you experience issues with your Airflow iCon ECO 15 fan, consult the following common troubleshooting steps:
| Tatizo | Sababu inayowezekana | Suluhisho |
|---|---|---|
| Shabiki haifanyi kazi. | No power supply; faulty wiring; fan motor failure; control module issue. | Check power supply at the switch and fuse box. Verify wiring connections (by a qualified electrician). If using a control module, check its functionality. |
| Shabiki ana kelele. | Obstruction in ducting or fan blades; loose mounting; worn bearings. | Disconnect power and inspect fan blades and ducting for obstructions. Ensure the fan is securely mounted. If noise persists, professional inspection may be required. |
| Poor extraction performance. | Blocked ducting; dirty fan blades; incorrect fan size for room. | Clean fan blades and check ducting for blockages. Ensure ducting is correctly installed and not excessively long or restrictive. |
| Iris shutter not opening/closing. | Obstruction; motor fault; control module issue. | Disconnect power and check for any physical obstructions around the shutter mechanism. If using a control module, verify its operation. |
For issues not listed here or if solutions do not resolve the problem, please contact Airflow customer support or a qualified technician.
9. Taarifa za Udhamini
Airflow Developments Ltd guarantees the iCon fan for miaka 3 from the date of purchase against faulty material or workmanship. This warranty is applicable to units installed and used in the United Kingdom.
You can register your warranty online for more information at www.airflow.com.
The warranty covers only the fan and does not include reinstallation if required. In the event of any defective parts being found, Airflow Developments Ltd reserves the right to repair or replace the unit at their discretion without charge, provided that:
- It has been installed and used in accordance with the fitting and wiring instructions supplied with each unit.
- It has not been connected to an unsuitable electrical supply.
- It has not been subjected to misuse, neglect, or damage.
- It has not been modified or repaired by any person not authorized by Airflow Developments Ltd.
- It has been installed in accordance with the latest Building Regulations and IET wiring regulations by a person who is recognized as a competent installer (e.g., NICEIC Ventilation Scheme).
Airflow Developments Ltd shall not be liable for any loss, injury, or other consequential damage arising from a failure of the equipment, except only that nothing in this condition shall be construed as to exclude or restrict liability for negligence.
This warranty does not affect any statutory or other consumer rights.
For detailed standard warranty terms and conditions, please visit the Airflow webtovuti au wasiliana na Huduma kwa Wateja.
10. Msaada na Mawasiliano
For further assistance, frequently asked questions (FAQs), and installation help, please visit the Airflow Knowledge Base:
airflow.com/useful-links/knowledge-base-faqs
