Antec Sonata Series SOLO II Black ATX Mid Tower Computer Case User Manual

Utangulizi

Welcome to the Antec Sonata Series SOLO II User Manual. This document provides comprehensive instructions for the setup, operation, and maintenance of your Antec SOLO II computer case. Designed for quiet computing, the SOLO II combines robust construction with practical features for an optimal computing environment.

This image displays the Antec Sonata Series SOLO II computer case from a front-right angle, highlighting its sleek piano black exterior and anodized aluminum front bezel. The front panel features drive bays, power/reset buttons, and USB ports.

Bidhaa Imeishaview

Sifa Muhimu

• Dual-layer 1.0 mm SECC / polycarbonate top & side panels for exceptional sound dampening.
• Support for Mini-ITX, microATX, and Standard ATX motherboards.
• Accommodates graphics cards up to 15 inches long.
• Front panel connectivity: 2 x USB 3.0, 2 x USB 2.0, Audio In/Out.
• Flexible drive bay configuration: 3 x 3.5"/2.5" using trays, 2 x 3.5" with suspension mounts, 2 x 5.25" external, 1 x 2.5" internal dedicated SSD mount.
• Cooling: 1 x rear 120mm TrueQuiet fan with silicone grommets and a 2-speed switch.
• Removable, washable front fan filters for easy maintenance.
• 7 expansion slots for system customization.

Vipengele

The Antec SOLO II case includes the main chassis, a pre-installed 120mm TrueQuiet exhaust fan, and various mounting hardware for internal components.

Maagizo ya Kuweka

Kuandaa Kesi

1. Weka kesi kwenye uso thabiti, gorofa.
2. Ondoa paneli za pembeni kwa kufungua skrubu za gumba nyuma ya kasha na kutelezesha paneli nyuma.

Ufungaji wa bodi ya mama

1. Sakinisha ngao ya I/O iliyotolewa na ubao wako wa mama kwenye sehemu ya nyuma ya kisahani.
2. Secure the motherboard standoffs in the appropriate positions for your motherboard form factor (Mini-ITX, microATX, or Standard ATX).
3. Weka ubao mama kwa uangalifu ndani ya kisanduku, ukilinganisha na sehemu za kusimama na ngao ya I/O.
4. Secure the motherboard with screws. The enlarged CPU cutout facilitates cooler installation.

Ufungaji wa Hifadhi

The SOLO II offers versatile drive mounting options:

5.25-inch Optical Drives

1. Remove the front bezel by gently pulling it from the bottom.
2. Remove the desired 5.25-inch bay cover.
3. Slide the optical drive into the bay from the front and secure it with screws or tool-less mechanisms if available.

3.5-inch and 2.5-inch Drives (Tray Mounts)

1. Utilize the provided trays for mounting up to three 3.5-inch or 2.5-inch drives.
2. Secure the drive to the tray with screws and slide the tray into an available bay.

3.5-inch Drives (Suspension Mounts)

1. For reduced vibration, use the suspension mount system for up to two 3.5-inch drives. Refer to the included accessory kit for specific instructions on using the silicone grommets and suspension wires.

Dedicated 2.5-inch SSD Mount

1. Locate the dedicated 2.5-inch SSD mount within the case.
2. Secure your 2.5-inch SSD to this mount using screws.

Graphics Card and Expansion Card Installation

1. Ondoa vifuniko muhimu vya nafasi ya upanuzi nyuma ya kesi.
2. Insert your graphics card or other expansion cards into the appropriate PCIe/PCI slots on the motherboard.
3. Secure the cards with screws. The case supports graphics cards up to 15 inches long.

Ufungaji wa Kitengo cha Ugavi wa Umeme (PSU)

1. Install your power supply unit into the designated area, typically at the top rear of the case.
2. Linda PSU na skrubu kutoka sehemu ya nyuma ya kipochi.

Usimamizi wa Cable

Route cables behind the motherboard tray where possible to improve airflow and aesthetics. Utilize cable ties to secure bundles.

Connecting Front Panel I/O

Connect the front panel USB 3.0, USB 2.0, and audio connectors to the corresponding headers on your motherboard. Ensure correct polarity for power and reset switches, and LED indicators.

Maagizo ya Uendeshaji

Inawasha

After all components are installed and connected, replace the side panels. Connect the power cable to the PSU and a wall outlet. Press the power button on the front panel to start your system.

Udhibiti wa Kasi ya Mashabiki

The rear 120mm TrueQuiet fan features a two-speed switch. Locate this switch, typically on the fan itself or accessible from the rear of the case, to select between silent operation or maximum RPM cooling based on your preference and system load.

Matengenezo

Cleaning Fan Filters

The front fan filters are removable and washable. Regularly remove and clean these filters to maintain optimal airflow and prevent dust buildup inside the case.

Usafishaji wa Jumla

Periodically clean the exterior of the case with a soft, damp cloth. Avoid abrasive cleaners. For interior cleaning, use compressed air to remove dust from components. Ensure the system is powered off and unplugged before cleaning.

Kutatua matatizo

Hakuna Nguvu

• Verify the power cable is securely connected to both the PSU and the wall outlet.
• Ensure the PSU's power switch is in the "on" position.
• Hakikisha kwamba kebo ya swichi ya umeme ya paneli ya mbele imeunganishwa kwa usahihi kwenye kichwa cha ubao mama.

Kelele Zilizozidi

• Confirm all fans (CPU, GPU, case fans) are securely mounted and free from obstructions.
• Ensure hard drives are properly mounted, especially utilizing the silicone grommets or suspension mounts to reduce vibration.
• Check that side panels are securely closed to maximize sound dampening.

USB Ports Not Functioning

• Verify that the front panel USB cables are correctly connected to the motherboard's USB headers.
• Check your motherboard's manual for correct header pin assignments.

Vipimo vya Kiufundi

Udhamini na Msaada

Taarifa ya Udhamini

The Antec Sonata Series SOLO II computer case is backed by a three-year warranty. Please retain your proof of purchase for warranty claims.

Usaidizi wa Wateja

For technical assistance or warranty inquiries, please visit the official Antec webtovuti au wasiliana na usaidizi kwa wateja wao moja kwa moja.

Usaidizi wa Antec Webtovuti