Stabila STABILA - 36520

Stabila 36520 24-Inch Electronic Magnetic Dust and Waterproof IP65 TECH Level

Model: STABILA - 36520

1. Utangulizi

1.1 Bidhaa Zaidiview

The Stabila 36520 is a 24-inch electronic magnetic level designed for precision measurement in various environments. It features a robust construction that is dust and waterproof to IP65 standards, ensuring durability and reliability. This level is equipped with an illuminated digital display for clear readings, even in low-light conditions. Its magnetic base allows for secure attachment to metallic surfaces, enhancing ease of use.

1.2 Sifa Muhimu

2. Kuweka

2.1 Kufungua na Kukagua

Carefully remove the Stabila 36520 level from its packaging. Inspect the level for any signs of damage that may have occurred during shipping. Ensure all components, including the level, protective case, and batteries, are present.

Stabila 36520 Electronic Level in its protective case

Figure 2.1: The Stabila 36520 electronic level, typically supplied with a protective case for transport and storage.

2.2 Ufungaji wa Betri

The Stabila 36520 level requires batteries for operation. Locate the battery compartment, typically on the side or back of the electronic module. Open the compartment, insert the specified batteries (usually AA or AAA, check the compartment for markings) ensuring correct polarity (+/-). Close the battery compartment securely.

3. Maagizo ya Uendeshaji

3.1 Operesheni ya Msingi

To power on the level, press the designated power button. The illuminated digital display will activate, showing the current angle or inclination. Place the level on the surface to be measured. The display will provide a real-time reading. For precise measurements, ensure the level is stable and not subject to vibrations.

3.2 Display and Mode Selection

The digital display shows the angle in various units. Use the mode button to cycle through different measurement modes, such as degrees (°), percent (%), or rise and run. The level also allows switching between metric and inch readings. Refer to the on-screen indicators to identify the active mode and unit.

Close-up of Stabila 36520 electronic level display showing a reading and water droplets

Figure 3.1: The illuminated digital display provides clear readings, even when exposed to moisture, demonstrating its IP65 rating.

3.3 Holding Readings

To temporarily hold a reading on the display, press the "Hold" button. This function is useful when you need to move the level but wish to retain the last measured value for reference. Press the "Hold" button again to release the reading and return to live measurement.

3.4 Upside Down Reading

The Stabila 36520 features an automatic display flip function. When the level is inverted (used upside down), the digital display will automatically reorient itself to ensure the numbers are always readable from the user's perspective, eliminating the need to read inverted digits.

3.5 Setting a Reference Angle (0 Degrees)

The level allows you to set any current angle as a new 0-degree reference point. This is particularly useful for measuring relative angles from a non-level surface. Consult the level's specific button layout for the "Set 0" or "Reference" function, typically a dedicated button or a combination press.

4. Matengenezo

4.1 Kusafisha

Due to its IP65 rating, the Stabila 36520 can be cleaned with a damp cloth. Avoid using abrasive cleaners or solvents that could damage the display or housing. Ensure the level is dry before storing it.

4.2 Hifadhi

When not in use, store the level in its protective case to prevent damage from impacts or dust. Store in a dry environment, away from extreme temperatures. If storing for extended periods, it is recommended to remove the batteries to prevent leakage.

4.3 Urekebishaji

The level features a calibration button to ensure accuracy over time. If you suspect the level is not providing accurate readings, refer to the manufacturer's instructions for the specific calibration procedure. This typically involves placing the level on a known flat surface and pressing the calibration button.

5. Utatuzi wa shida

TatizoSababu inayowezekanaSuluhisho
Onyesho haliwashi.Betri zilizokufa au zilizosakinishwa vibaya.Badilisha betri, hakikisha polarity sahihi.
Usomaji usio sahihi.Level needs calibration; surface is not stable.Perform calibration as per instructions; ensure stable measurement surface.
Onyesho ni hafifu au linapepea.Nguvu ya chini ya betri.Badilisha betri.
Vifungo havijibu.Temporary software glitch; extreme temperature.Remove and reinsert batteries to reset; allow level to return to operating temperature range.

6. Vipimo

SifaThamani
ChapaStabila
Nambari ya MfanoSTABILA - 36520
UrefuInchi 24 (takriban sentimita 61)
Vipimo24.5"L x 4.5"W
NyenzoMetal, Impact resistant material
RangiBlack (electronic module), Yellow (level body)
Uzito wa KipengeePauni 2
Darasa la UlinziIP65 (Vumbi na Haipitishi Maji)
Chanzo cha NguvuBattery Powered (Batteries Included)
Vipengele MaalumDigital display, Magnetic base, Display flip, Hold function, Calibration button, Removable end caps
UPC089634365204
Tarehe ya Kwanza InapatikanaFebruari 28, 2011

7. Udhamini na Msaada

7.1 Taarifa ya Udhamini

Stabila provides a warranty for the 36520 electronic level. Stabila will repair without charge any defects due to faulty materials or workmanship for 2 years from the date of purchase. Please retain your proof of purchase for warranty claims.

7.2 Usaidizi kwa Wateja

For technical assistance, troubleshooting beyond this manual, or warranty service, please contact Stabila customer support. Refer to the official Stabila website or product packaging for the most current contact information, including phone numbers and email addresses.

Nyaraka Zinazohusiana - STABILA - 36520

Kablaview Mwongozo wa Mtumiaji wa Mita ya Umbali wa Laser STABILA LD 220
Mwongozo wa kina wa mtumiaji wa mita ya umbali wa leza ya STABILA LD 220, inayofunika bidhaa juuview, usanidi wa chombo, vipimo vya kiufundi, misimbo ya ujumbe, udhamini, na maelezo ya mawasiliano.
Kablaview STABILA LAR 160 / LAR 160 G Navodila za uporabo - Rotacijski laser
Celovita navodila za uporabo za rotacijski laser STABILA LAR 160 katika LAR 160 G. Vključuje varnostna opozorila, opis elementov naprave, načine delovanja, funkcije, LED prikaze, preverjanje natančnosti katika tehnične podatke.
Kablaview Maagizo ya Uendeshaji ya Kiwango cha Laser ya STABILA LAX 300 G
Maagizo ya kina ya uendeshaji ya kiwango cha leza cha STABILA LAX 300 G, yakielezea kwa kina matumizi yanayokusudiwa, vipengee vikuu, njia za uendeshaji, kuagiza, ukaguzi wa urekebishaji na vipimo vya kiufundi.
Kablaview Maagizo ya Uendeshaji ya Mfululizo wa STABILA LAX 600
Maagizo kamili ya uendeshaji kwa kiwango cha leza cha mfululizo wa STABILA LAX 600, yanayohusu matumizi yaliyokusudiwa, vipengele vya kitengo, uamilishaji, kazi, viashiria vya LED, matumizi ya mabano, ukaguzi wa usahihi, na vipimo vya kiufundi. Inajumuisha miongozo ya usalama na taratibu za uendeshaji.
Kablaview STABILA LAR 160 / LAR 160 G Mwongozo wa Mtumiaji wa Kiwango cha Laser ya Rotary
Mwongozo wa mtumiaji wa viwango vya leza ya kuzunguka vya STABILA LAR 160 na LAR 160 G. Inajumuisha maagizo ya uendeshaji, maelezo ya usalama, utendakazi, vipimo vya kiufundi, na ukaguzi wa usahihi kwa matumizi ya kitaalamu kwenye tovuti za ujenzi.
Kablaview Maagizo ya Uendeshaji ya STABIL LAR 160 / LAR 160 G
Maagizo ya uendeshaji wa leza za mzunguko za STABILA LAR 160 na LAR 160 G, yanayohusu matumizi yaliyokusudiwa, usalama, vipengele, uamilishaji, hali za uendeshaji, utendaji kazi, viashiria vya LED, ukaguzi wa usahihi, na data ya kiufundi.