Intermatic PE25300 60-Amp Mwongozo wa Maelekezo ya Paneli

Utangulizi

This manual provides essential instructions for the installation, operation, and maintenance of the Intermatic PE25300 60-Amp Panel. This control system is designed for managing pool, spa, or water feature applications, offering control over up to three timed circuits. These circuits can manage single-speed or two-speed filter pumps, cleaner/booster pumps, and various lighting systems. The unit features countdown and override functions for flexible scheduling.

Taarifa Muhimu za Usalama

ONYO: Risk of Electrical Shock. Installation and servicing of this product should only be performed by qualified personnel. Always disconnect power at the main circuit breaker before performing any work on this unit.

TAHADHARI: The mode key for programming is intended for use by authorized personnel only. Improper use may lead to incorrect operation or damage.

Breaker Tripped Indication: If a breaker handle is found in a mid-position, it indicates the breaker has tripped. To restore service, first move the handle to the "OFF" position, then to the "ON" position.

Bidhaa Imeishaview

The Intermatic PE25300 is a robust 60-Amp panel designed for outdoor use, featuring an integrated digital control system. It provides centralized control for various pool and spa equipment.

Intermatic PE25300 60-Amp Panel with open door, showing the digital control interface and circuit breaker slots.

Kielelezo cha 1: Intermatic PE25300 60-Amp Panel. This image displays the Intermatic PE25300 60-Amp Panel with its front door open. Inside, a digital control panel with 'PROG' and 'ENTER' buttons, along with up/down arrows and 'ON/OFF' buttons for three circuits, is visible. Below the control panel are slots for circuit breakers. The inner side of the door contains important safety and operational labels.

Vipengele Muhimu:

Uzio: Rainproof aluminum enclosure for outdoor installation.
Paneli ya Kudhibiti Dijiti: Features a display, 'PROG', 'ENTER', Up/Down arrow keys, and 'ON/OFF' buttons for three circuits.
Circuit Breaker Slots: Accommodates standard circuit breakers (not included) for electrical protection.
Vituo vya Wiring: Located inside for secure electrical connections.

Ufungaji

Installation of the Intermatic PE25300 panel must comply with all national and local electrical codes. It is strongly recommended that installation be performed by a licensed electrician.

Hatua za Jumla:

Kupachika: Securely mount the enclosure to a suitable surface, ensuring it is level and accessible.
Wiring: Connect the main power supply (120, 240 VAC or 120, 208 VAC single phase, 60 Amps) to the panel's main terminals.
Miunganisho ya Mzunguko: Wire the pool/spa equipment (pumps, lights) to the appropriate circuit breaker slots and terminals within the panel.
Kutuliza: Ensure proper grounding of the enclosure and all connected equipment.
Ufungaji wa Kivunja: Install appropriate circuit breakers for each connected load.

Refer to the detailed wiring diagrams provided inside the panel door and consult the full installation guide for specific instructions.

Maagizo ya Uendeshaji

The digital control panel allows for programming and manual control of the connected circuits.

Majukumu ya Paneli ya Kudhibiti:

PROG Key: Press this key to cycle through the various menu options for programming.
UP & DOWN Arrow Keys: Use these keys to navigate through menu options and adjust program settings (e.g., time, duration).
ENTER Key: Press to save changes made to program settings and to exit programming mode.
ON/OFF Keys (Circuit 1, 2, 3): These buttons allow for manual activation or deactivation of the respective circuits, overriding programmed schedules temporarily.

Programming Timed Circuits:

Bonyeza kwa PROG key to enter the programming menu.
Tumia UP na CHINI arrow keys to select the desired circuit and program setting (e.g., ON time, OFF time).
Adjust the values using the UP na CHINI funguo za mshale.
Bonyeza kwa INGIA key to confirm the setting and move to the next parameter or save changes.
Repeat for all desired circuits and settings. Press INGIA to exit programming mode after all changes are made.

Kubatilisha kwa Mwongozo:

To manually turn a device ON or OFF, simply press the corresponding WASHA/ZIMWA button for Circuit 1, Circuit 2, or Circuit 3. This action will temporarily override any active program for that specific circuit.

Matengenezo

Regular maintenance ensures the longevity and safe operation of your Intermatic PE25300 panel.

Ukaguzi wa Mara kwa Mara: Annually inspect the enclosure for any signs of damage, corrosion, or water ingress.
Ukaguzi wa Kituo: Ensure all electrical connections are tight and free from corrosion. This should be done by a qualified electrician.
Kusafisha: Keep the exterior of the panel clean and free from debris. Do not use abrasive cleaners or solvents.
Breaker Functionality: Periodically test circuit breakers by pressing their test buttons (if available) to ensure they trip correctly.

Kutatua matatizo

Tatizo	Sababu inayowezekana	Suluhisho
Device not turning ON/OFF as programmed.	Incorrect program settings; Manual override active; Power interruption.	Verify program settings using PROG and ENTER keys. Check if manual ON/OFF button is engaged. Confirm power supply to the unit.
Mzunguko wa mzunguko amejikwaa.	Overload on the circuit; Short circuit; Equipment malfunction.	Disconnect the load from the circuit. Reset the breaker by moving the handle to "OFF" then "ON". If it trips again, consult a qualified electrician to diagnose the issue.
Onyesho ni tupu.	No power to the unit; Internal fault.	Check main power supply and associated circuit breakers. If power is present and display remains blank, contact Intermatic support.

Vipimo

Mfano: PE25300
AmpUwezo wa hasira: 60 Amps
Voltage: 120, 240 VAC au 120, 208 VAC awamu moja
Nyenzo: Alumini
Approximate Unit Dimensions (H x W x D): 17.6 inches x 12.1 inches x 6.1 inches (based on package dimensions)
Uzito wa Kipengee: 1 pound (Note: This may refer to shipping weight or a component, as the full panel is typically heavier.)
Mtengenezaji: Intermatic
Nchi ya Asili: Mexico
Vipengele vilivyojumuishwa: PE25300 unit

Taarifa ya Udhamini

This Intermatic PE25300 unit comes with a Udhamini Mdogo wa Miaka 1. The warranty covers replacement of the unit but does not include labor costs for removal or reinstallation. Please retain your proof of purchase for warranty claims.

Usaidizi wa Wateja

For further assistance, technical support, or warranty inquiries, please contact Intermatic customer service or visit their official webtovuti.

Unaweza kupata habari zaidi na maelezo ya mawasiliano kwenye Duka la Intermatic kwenye Amazon au shirika lao rasmi webtovuti.

	Intermatic P1131 Portable Heavy Duty Pool & Spa Timer Owner's Manual Owner's manual for the Intermatic P1131 Portable Heavy Duty Pool & Spa Timer. Provides setup instructions, safety warnings, troubleshooting guide, and warranty information for convenient and energy-saving operation of pool and spa equipment.
	Mwongozo wa Mmiliki wa Kipima Muda cha Bwawa la Kuogelea na Spa cha Intermatic P1161 - Usalama, Usanidi, na Upimaji wa GFCI Comprehensive owner's manual for the Intermatic P1161 Portable Safety Pool & Spa Timer. Includes important safety instructions, how to set the timer, warranty information, GFCI explanation, troubleshooting guide, and monthly testing procedures.
	Intermatic P1121 RAINTIGHT OUTDOOR TIMER - User Guide and Safety Instructions User guide and safety instructions for the Intermatic P1121 RAINTIGHT OUTDOOR TIMER. Learn how to set the timer, understand its features, and follow essential electrical safety precautions for outdoor use.
	Intermatic PE25300 Pool/Spa Equipment Control Panel Installation, Operation & Service Manual Comprehensive installation, operation, and service manual for the Intermatic PE25300 Pool/Spa Equipment Control Panel with Digital Time Clock. Includes safety instructions, wiring diagrams, troubleshooting, accessories, and warranty information.
	Mwongozo wa Kusakinisha na Kupanga Kipima Muda cha Taa cha Intermatic EJ341C/EJ343C Maagizo ya kina ya kusakinisha na kuprogramu swichi za kipima muda cha taa za EJ341C (Nguzo Moja) na EJ343C (Njia Tatu). Hushughulikia usanidi, vidhibiti, mbinu za kuprogramu, utatuzi wa matatizo, na vipimo.
	Kipima Muda cha Ndani cha Mfululizo wa ST01K cha Intermatic na Usakinishaji wa Vipengele vya Astro na Maagizo ya Mtumiaji Usakinishaji kamili na mwongozo wa mtumiaji wa Kipima Muda cha Intermatic ST01K Series In-Ukuta chenye Kipengele cha Astro, kinachoshughulikia usanidi, programu, nyaya, na taarifa za udhamini.