Utangulizi
This manual provides detailed instructions for the installation, operation, and maintenance of your Kingston Brass KB3605BL Vintage 4-Inch Centerset Lavatory Faucet. Please read all instructions carefully before beginning installation to ensure proper function and longevity of your product. This faucet features a classic design with an oil rubbed bronze finish, designed for deck mount, three-hole installations.

Image: The Kingston Brass KB3605BL Vintage 4-Inch Centerset Lavatory Faucet in Oil Rubbed Bronze.
Taarifa za Usalama
- Daima zima ugavi mkuu wa maji kabla ya kusakinisha au kufanya matengenezo kwenye bomba.
- Vaa vifaa vya kinga binafsi vinavyofaa, kama vile miwani ya usalama, wakati wa ufungaji.
- Ikiwa huna uhakika kuhusu sehemu yoyote ya mchakato wa usakinishaji, wasiliana na fundi bomba aliyehitimu.
- Hakikisha miunganisho yote iko salama ili kuzuia uvujaji.
Yaliyomo kwenye Kifurushi
Thibitisha kuwa vipengele vyote vipo kabla ya kuanza usakinishaji:
- Mkutano wa bomba la lavatory
- Vifaa vya Kuweka
- Matching Pop-Up Drain Assembly
Vipimo
| Kipengele | Maelezo |
|---|---|
| Nambari ya Mfano | KB3605BL |
| Maliza Aina | Mafuta ya shaba iliyosuguliwa |
| Nyenzo | Shaba |
| Aina ya Kuweka | Mlima wa Deck |
| Aina ya Ufungaji | Seti ya katikati |
| Hesabu ya Shimo | 3 |
| Idadi ya Hushughulikia | 2 |
| Ufikiaji wa Spout | Inchi 4 |
| Urefu wa Spout | Inchi 3.5 |
| Usafishaji wa Spout | Inchi 2 |
| Kiwango cha Juu cha Kiwango cha Mtiririko | Galoni 1.8 kwa Dakika (Lita 6.8 kwa Dakika) |
| Aina ya Cartridge | Dura Seal Washerless |
| Kipengele Maalum | Pop Up Drain Included |

Image: Dimensional drawing providing precise measurements for installation.
Kuweka na Kuweka
This faucet is designed for a 4-inch centerset, three-hole deck mount installation. Follow these general steps:
- Tayarisha Sink: Ensure the sink deck is clean and free of debris. The faucet requires three holes, typically 4 inches apart (centerset).
- Sakinisha Mwili wa Bomba: Place the faucet body onto the sink holes. Secure it from underneath the sink using the provided mounting hardware (washers and nuts). Tighten securely but do not overtighten.
- Unganisha Njia za Ugavi wa Maji: Attach the hot and cold water supply lines to the faucet's inlets. Use thread sealant tape on the threaded connections and tighten with a wrench. Connect the other ends to your home's hot and cold water supply valves.
- Install the Pop-Up Drain: Insert the drain body into the sink's drain hole. Apply plumber's putty or silicone sealant around the flange to create a watertight seal. Secure the drain body from underneath with the washer and nut.
- Connect the Pop-Up Rod: Assemble the pop-up rod mechanism according to the diagram. Connect the horizontal pivot rod to the vertical pop-up rod using the clevis strap and screw. Ensure smooth operation of the drain stopper.
- Jaribio la Uvujaji: Once all connections are made, slowly turn on the main water supply. Check all connections for leaks. If leaks are detected, tighten the connections as necessary.

Image: Diagram showing the pop-up drain assembly, including the pivot rod, clevis screw, clevis strap, plunger, and pop-up rod.
Uendeshaji
The Kingston Brass KB3605BL faucet features two handles for controlling water flow and temperature:
- Maji baridi: The right handle controls the cold water supply. Turn it counter-clockwise for ON and clockwise for OFF.
- Maji ya Moto: The left handle controls the hot water supply. Turn it counter-clockwise for ON and clockwise for OFF.
- Udhibiti wa Halijoto: Adjust the hot and cold handles simultaneously to achieve the desired water temperature.
- Kiwango cha mtiririko: The faucet delivers a maximum flow rate of 1.8 gallons per minute (GPM) at 60 PSI.
- Pop-Up Drain: Lift the small rod located behind the faucet spout to close the drain stopper. Push it down to open the drain.
Matengenezo
Proper care will maintain the finish and performance of your faucet:
- Kusafisha: Safisha bomba mara kwa mara kwa kitambaa laini na sabuni laini. Epuka visafishaji vyenye kung'aa, kemikali kali, au rangi zinazoweza kuharibu umaliziaji.
- Matengenezo ya Aerator: If water flow decreases or becomes irregular, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris, and rinse thoroughly before reattaching.
- Kuzuia Uvujaji: The faucet uses a drip-free washerless cartridge system. If a leak occurs from the handles, the cartridge may need to be inspected or replaced.
Kutatua matatizo
| Tatizo | Sababu inayowezekana | Suluhisho |
|---|---|---|
| Mtiririko wa Maji ya Chini | Clogged aerator; partially closed supply valves. | Clean aerator; ensure supply valves are fully open. |
| Uvujaji wa Bomba Kutoka kwa Mrija | Cartridge iliyovaliwa. | Badilisha nafasi ya cartridge. |
| Leaks from Handle Base | Loose packing nut; worn O-rings or cartridge. | Tighten packing nut; replace O-rings or cartridge. |
| Masuala ya Joto la Maji | Incorrect supply line connections; water heater issues. | Verify hot/cold connections; check water heater. |
Taarifa ya Udhamini
Kingston Brass products come with a generous product warranty. For specific details regarding your faucet's warranty coverage, please refer to the warranty documentation included with your purchase or visit the official Kingston Brass webtovuti.
Msaada
If you require further assistance or have questions not covered in this manual, please contact Kingston Brass customer support. You can typically find contact information on the manufacturer's webtovuti au kwenye ufungaji wa bidhaa.
Kwa habari zaidi, tembelea Kingston Brass Store.





