Dickson TM320 Temperature and Humidity Data Logger

1. Utangulizi

The Dickson TM320 is a versatile data logger designed to accurately monitor and record temperature and humidity levels. Featuring a large display for real-time readings, audio/visual alarms, and convenient data transfer options via USB and flash card, it provides essential environmental monitoring for various applications. Its user-friendly design ensures ease of use and reliable performance.

• USB Enabled Download: Easily transfer recorded data to a computer.
• Flash Memory Data Transfer Capability: Utilize flash cards for convenient data retrieval.
• Jumbo Display: Clear and easy-to-read real-time measurements.
• Rahisi Kutumia: Intuitive interface for straightforward operation.

2. Taarifa za Usalama

Please read all safety instructions before operating the device. Failure to do so may result in damage to the device or personal injury.

• Do not expose the device to extreme temperatures outside its specified operating range.
• Avoid direct contact with water or high humidity environments beyond the non-condensing range.
• Tumia vyanzo vya umeme na vifaa vilivyoainishwa pekee.
• Usijaribu kufungua au kutengeneza kifaa mwenyewe. Rejelea huduma zote kwa wafanyikazi waliohitimu.
• Weka mbali na watoto.

3. Yaliyomo kwenye Kifurushi

Thibitisha kuwa vipengee vyote vipo kwenye kifurushi:

• Dickson TM320 Data Logger
• Mwongozo wa Maagizo (hati hii)
• USB Cable (may be sold separately)
• SD Card (may be sold separately)
• Batteries (may be pre-installed or included)

4. Bidhaa Imeishaview

Kielelezo 4.1: Mbele View. Shows the large digital display, 'DICKSON' branding, and three control buttons: MIN/MAX, ALARM, and SAVE.

Kielelezo 4.2: Upande View na Bandari. Illustrates the mini-USB port for data transfer and external sensor input jacks, along with ventilation for internal sensors.

Kielelezo 4.3: Nyuma View. Displays the battery compartment cover and keyhole slots for wall mounting.

Kielelezo 4.4: Juu View. Shows the slot for inserting an SD card for data storage and transfer.

5. Kuweka

5.1. Ufungaji wa Betri

1. Tafuta sehemu ya betri nyuma ya kifaa (rejea Mchoro 4.3).
2. Telezesha kifuniko cha betri wazi.
3. Insert the required batteries (typically AA or AAA, check compartment for type) ensuring correct polarity (+/-).
4. Funga kifuniko cha betri kwa usalama.

5.2. Umeme wa Awali

The device should power on automatically once batteries are installed. The display will illuminate, showing current readings or a startup sequence.

5.3. Kuweka Kifaa

The TM320 can be placed on a flat surface or mounted on a wall:

• Uwekaji wa uso: Ensure the device is placed on a stable, level surface away from direct heat sources or extreme drafts.
• Uwekaji Ukuta: Use appropriate screws (not included) with the keyhole slots on the back of the device (refer to Figure 4.3) to secure it to a wall. Ensure it is mounted in a location representative of the environment you wish to monitor.

6. Uendeshaji

6.1. Kuelewa Onyesho

The jumbo display provides real-time information:

• Usomaji wa Sasa: Shows the live temperature or humidity value.
• Vitengo: Indicates Fahrenheit (F) or Celsius (C) for temperature, and %RH for humidity.
• Kiashiria cha Betri: Huonyesha maisha ya betri iliyobaki.
• CH (Kituo): Indicates which channel is currently displayed (e.g., CH 1 for temperature, CH 2 for humidity).

6.2. Kazi za Kitufe

• Kitufe cha MIN/MAX: Press to cycle through minimum, maximum, and current readings for both temperature and humidity. Hold to reset min/max values.
• Kitufe cha ALARM: Bonyeza kwa view current alarm settings. Hold to enter alarm setting mode (refer to section 6.4).
• Kitufe cha HIFADHI: Press to manually save a data point.

6.3. Uwekaji Data

The TM320 automatically logs data at a pre-set interval. Data can be viewed on the display or downloaded to a computer.

6.4. Kuweka Kengele

The device features audio/visual alarms for out-of-range conditions.

1. Bonyeza na ushikilie ALARM button until the alarm setting mode is activated.
2. Tumia MIN / MAX button to navigate between temperature and humidity alarm settings (high/low).
3. Tumia HIFADHI button to adjust the alarm threshold values.
4. Bonyeza ALARM again to confirm and exit the setting mode.

6.5. Data Download (USB)

1. Connect the TM320 to your computer using a compatible USB cable (refer to Figure 4.2 for port location).
2. The device should be recognized as a removable storage device or require specific Dickson software (refer to manufacturer's website for software).
3. Follow the software instructions to download and analyze the logged data.

6.6. Data Transfer (Flash Card)

If your model supports flash card data recovery:

1. Insert a compatible SD card into the SD card slot (refer to Figure 4.4).
2. The device may automatically transfer data or require a specific button press (consult software/manual for details).
3. Remove the SD card and insert it into a computer's card reader to access the data.

7. Matengenezo

7.1. Kusafisha

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the sensor vents or ports.

7.2. Kubadilisha Betri

Replace batteries when the low battery indicator appears on the display. Follow the battery installation steps in Section 5.1.

7.3. Hifadhi

Ikiwa haitumiki kwa muda mrefu, ondoa betri na uhifadhi kifaa mahali pakavu na penye baridi, mbali na jua moja kwa moja na halijoto kali.

8. Utatuzi wa shida

9. Vipimo

10. Udhamini na Msaada

This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Dickson website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Dickson customer service through their official channels.

Dickson Official Webtovuti: www.dicksonlogger.com