1. Bidhaa Imeishaview
The Kingston Brass KB1001 Pop-Up Drain is designed for lavatory sinks, featuring durable brass construction and a polished chrome finish. This assembly includes all necessary components for a standard installation, ensuring reliable performance and a tarnish-resistant surface.
Sifa Muhimu:
- Solid Brass Construction for durability.
- Polished Chrome finish for tarnish and corrosion resistance.
- Designed for easy installation.
- 1-1/4" Diameter Tube.
- Fits all standard lavatory drain openings.
- Inajumuisha vifaa vya kuongezeka.
Figure 1: Kingston Brass KB1001 Polished Chrome Pop-Up Drain Assembly Components. This image displays all the components included in the Kingston Brass KB1001 pop-up drain assembly, featuring the polished chrome drain body, stopper, lift rod, and connecting hardware.
2. Kuweka na Kuweka
Before beginning installation, ensure all parts are present and inspect them for any damage. Refer to the technical drawing for component identification and dimensions.
Zana Zinazohitajika:
- Adjustable Wrench or Basin Wrench
- Putty ya Fundi au Silicone Sealant
- Teflon Tape (Thread Seal Tape)
- Rag au Taulo
Hatua za Ufungaji:
- Tayarisha Ufunguzi wa Sink: Clean the sink drain opening thoroughly, removing any old putty or sealant.
- Apply Sealant to Drain Flange: Paka ushanga wa putty ya fundi au silikoni sealant kuzunguka upande wa chini wa flange ya kukimbia (sehemu ya juu ambayo inakaa kwenye sinki).
- Ingiza Mwili wa Maji: Insert the drain body through the sink opening from above, pressing down firmly to create a seal with the putty/sealant.
- Install Gaskets and Nut: From underneath the sink, slide the rubber washer, friction washer, and mounting nut onto the drain body. Hand-tighten the mounting nut.
- Align and Tighten: Ensure the drain body is properly aligned. Use an adjustable wrench to tighten the mounting nut securely, but do not overtighten. Wipe away any excess putty/sealant.
- Connect Tailpiece (if separate): If the tailpiece is not pre-attached, apply Teflon tape to the threads of the drain body where the tailpiece connects. Screw the tailpiece onto the drain body and hand-tighten, then use a wrench for a snug fit. It is recommended to apply Teflon tape or pipe sealant to the threads where the tailpiece connects to the drain body, even if pre-assembled, to prevent leaks.
- Assemble Pop-Up Mechanism: Insert the lift rod through the faucet body (if applicable) and connect it to the clevis strap. Attach the horizontal rod (pivot rod) to the drain body's opening. Secure the pivot rod with the pivot nut, ensuring the ball is properly seated and sealed with its washer.
- Adjust Stopper: Insert the pop-up stopper into the drain opening. Adjust the clevis strap and lift rod to ensure the stopper opens and closes correctly. The stopper itself may be two pieces; ensure both parts are securely tightened together before installation.
- Jaribio la Uvujaji: Fill the sink with water and then drain it, carefully checking all connections for any leaks. Tighten connections as needed.
Figure 2: Technical drawing of Kingston Brass KB1001 Pop-Up Drain with dimensions. A detailed technical drawing illustrating the dimensions and structure of the Kingston Brass KB1001 pop-up drain, including measurements for the drain body, tailpiece, and lift rod mechanism.
3. Maagizo ya Uendeshaji
The Kingston Brass KB1001 Pop-Up Drain operates via a lift rod mechanism, typically located on the faucet. To operate:
- Ili Kufunga Mfereji: Push down on the lift rod to lower the stopper and seal the drain opening, allowing the sink to fill with water.
- Ili Kufungua Mfereji: Pull up on the lift rod to raise the stopper, allowing water to drain from the sink.
Ensure the lift rod moves freely and the stopper fully seals and opens without obstruction.
4. Matengenezo
Proper maintenance will extend the life and preserve the finish of your pop-up drain.
Kusafisha:
- Safisha umaliziaji wa chrome uliosuguliwa mara kwa mara kwa kutumia laini, damp kitambaa.
- Tumia sabuni na maji tu kwa kusafisha.
- Epuka abrasive cleaners, harsh chemicals, ammonia-based products, or scouring pads, as these can damage the finish and lead to deterioration.
- Osha vizuri baada ya kusafisha na kavu kwa kitambaa laini ili kuzuia matangazo ya maji.
Ukaguzi wa Mara kwa Mara:
- Periodically check the drain for any signs of leaks, especially around the mounting nut and tailpiece connections.
- Inspect the pop-up stopper and pivot rod for any debris or hair accumulation that might impede operation. Clean as necessary.
- Ensure the stopper's two pieces remain securely tightened.
5. Utatuzi wa shida
This section addresses common issues you might encounter with your pop-up drain.
| Tatizo | Sababu inayowezekana | Suluhisho |
|---|---|---|
| Leakage at drain connections | Improperly tightened nuts, insufficient sealant, or missing washers. Loose connection between drain body and tailpiece. | Ensure all nuts are tightened. Apply plumber's putty or silicone sealant under the drain flange. For tailpiece connections, apply Teflon tape or pipe sealant to threads and tighten securely. Check for proper washer placement. |
| Pop-up stopper does not seal or open properly | Lift rod or clevis strap misaligned, pivot rod obstructed, or debris in drain. Stopper parts loose. | Adjust the clevis strap and lift rod to ensure proper stopper movement. Remove the stopper and clean any debris from the drain opening and pivot rod. Ensure the two pieces of the stopper are securely tightened. |
| Finish deterioration or discoloration | Exposure to harsh cleaning chemicals or abrasive materials. | Use only mild soap and water for cleaning. Avoid abrasive cleaners, harsh chemicals, and scouring pads. Regular gentle cleaning is recommended. |
| Utoaji wa polepole | Hair or debris accumulation in the drain. | Remove the pop-up stopper and clear any obstructions from the drain opening and pivot rod. |
6. Vipimo
Detailed specifications for the Kingston Brass KB1001 Pop-Up Drain.
Figure 3: Kingston Brass KB1001 Pop-Up Drain dimensions and finish options. This diagram provides key dimensions of the Kingston Brass KB1001 pop-up drain and showcases various available finish options, highlighting its 22-gauge solid brass construction and overflow design.
- Nambari ya Mfano: KB1001
- Nyenzo: Shaba
- Kipimo: 22 kupima
- Rangi / Maliza: Chrome iliyosafishwa
- Uzito wa Kipengee: Wakia 14.88 (takriban pauni 0.93)
- Vipimo vya Bidhaa: Inchi 8.25 x 2.13 x 2.13
- Ukubwa: 2-1/8'' (Kubwa) x 2-1/8'' (Upana) x 7-7/20'' (Urefu)
- Umbo: Mzunguko
- Mtindo: Jadi
- Vipengele vilivyojumuishwa: Futa mkutano
- Drain Tube Diameter: 1-1/4 inchi
- Kufurika: Yes, designed with overflow
- Sink Drain Hole Diameter Compatibility: Minimum 1-5/8 inches, Maximum 1-3/4 inches
- Sink Drain Hole Thickness Compatibility: Maximum 2-1/4 inches
- UPC: 735090558130, 663370224577
7. Udhamini na Msaada
Warranty information for the Kingston Brass KB1001 Pop-Up Drain was not provided in the product data. For specific warranty details or technical support, please contact Kingston Brass directly.
Maelezo ya Mawasiliano:
Please refer to the official Kingston Brass website or product packaging for the most current customer service contact details, including phone numbers, email addresses, or online support portals.
