Mwongozo wa Maelekezo ya Kisambazaji cha Redio cha WFLY ET16S cha Channel 16

1. Utangulizi

The WFLY ET16S is a high-performance 16-channel RC radio transmitter designed for FPV drones, RC aircraft, and other remote-controlled vehicles. Featuring Hall Gimbals for precise control, an extensible high-frequency system, and a 3.5-inch color touch screen, the ET16S offers an advanced and customizable user experience. This manual provides essential information for setting up, operating, and maintaining your ET16S transmitter.

Figure 1: WFLY ET16S RC Radio Transmitter with RF209S receiver and key features including 16 channels, 2.4 GHz, 3.5-inch display, and 4096 resolution.

2. Kuweka

2.1 Ufungaji wa Betri

The ET16S uses a standard 18650 battery bay. Ensure batteries are inserted with correct polarity.

Open the battery cover located at the bottom rear of the transmitter.
Insert 18650 batteries into the battery holder, observing the polarity markings.
Connect the battery holder to the battery interface inside the compartment.
Funga kifuniko cha betri kwa usalama.

Nyuma view of WFLY ET16S RC Radio with battery compartment open, showing battery holder — Kielelezo cha 2: Nyuma view of the ET16S showing the open battery compartment and the 18650 battery holder.

Nyuma view of ET16S showing standard 18650 battery bay — Figure 3: Close-up of the standard 18650 battery bay.

2.2 External Module Installation

The ET16S features a JR bay expansion slot, supporting various external modules for extended compatibility.

The transmitter supports modules such as TBS Crossfire, JP 4 in 1, and FrSky R9M.
To install, align the module with the JR bay expansion slot on the rear of the transmitter and gently push until it clicks into place.

Nyuma view of ET16S showing support for TBS Crossfire, JP 4 in 1, FrSky R9M modules — Kielelezo cha 4: Nyuma view of the ET16S highlighting support for various external modules.

ET16S with TBS Crossfire module installed — Figure 5: ET16S with a TBS Crossfire module installed.

Nyuma view of ET16S showing support for JP 4 in 1 module — Figure 6: ET16S showing compatibility with JP 4 in 1 modules.

ET16S with FrSky R9M module installed — Figure 7: ET16S with an FrSky R9M module installed.

2.3 Receiver Port Setting

The output channels of each pin header on the receiver (e.g., RF209 or RF204W) can be customized. Refer to the diagram below for physical sorting of pin header ports and port output channel sequence.

Diagram showing receiver port setting and switch customization — Figure 8: Receiver port setting and switch customization diagram. Left side shows pin header port physical sort (1-9, W), right side shows port output channel sequence (1-12, W).

3. Maagizo ya Uendeshaji

3.1 Transmitter Parts Overview

Familiarize yourself with the various parts and controls of your ET16S transmitter:

Detailed diagram of WFLY ET16S transmitter parts and their names — Figure 9: Detailed diagram labeling all parts of the ET16S transmitter, including antenna, switches (SA, SB, SC, SD, SE, SF, SH, SG), rotary knobs (LD, RD), gimbals (J1, J2, J3, J4), trim buttons (Trim1-6), power key, HOME/MON button, Fn Toggle Key, Fn Status LED, 5-way button, EXIT/LOCK button, Color LCD, Hook, RS/LS Slide Levers, Headphone Port, Trainer Port, JR Bay adapter, Battery cover, and USB Port.

3.2 Color Touch Screen Interface

The ET16S features an English color touch screen for intuitive operation. Navigate through menus and settings by touching the screen.

English color touch screen interface showing System setting, Linkage setting, General setting, and Model menu options — Figure 10: The English color touch screen interface, demonstrating menu navigation.

3.3 Switch Customization

All switches, rockers, rotary knobs, and keys on the transmitter can be customized. In the corresponding function setting interface, click the setting switch button to freely configure application switches.

3.4 Wireless Copy Function

The ET16S supports wireless transmitting/receiving of model data. This function only supports copying data between transmitters of the same model and version.

Diagram illustrating wireless copy function and 16 linear channels with 4096 resolution — Figure 11: Wireless copy function showing data transmission progress and the 16 linear channels with 4096 resolution.

3.5 Matangazo ya Sauti

The system provides dynamic real-time voice broadcasts for various parameters, including receiver voltage, ujazo wa betritage, transmitter voltage, timer, and trim location.

3.6 Program Mixes

The ET16S offers 10 sets of program mixes, allowing for user-defined mixes and greater personalization, from ordinary proportional mixing to precise curve mixing.

3.7 Relay Flight

This feature allows two pilots to operate radios for relay flight in the air, with one acting as the main transmitter and the other as the sub-transmitter.

Diagram showing 10 sets of program mixes and Relay flight function — Figure 12: Program mixes interface and an illustration of the relay flight function.

4. Matengenezo

4.1 USB Online Upgrade

The ET16S supports free USB online upgrades for firmware. Connect the transmitter to a Windows PC via USB to perform updates. This feature provides value-added service and ensures your transmitter is always up-to-date.

Diagram illustrating voice broadcast and USB online upgrade — Figure 13: Illustration of the USB online upgrade process (for Windows only).

4.2 Hall Sensor Gimbals

The new Hall Sensor Gimbals offer smoother operation and a longer lifespan due to their non-contact design, which eliminates attrition. This technology also contributes to a better hand feel and prevents fingerprints.

Figure 14: Visual representation of the Hall Sensor Gimbals and the 'no fingerprints' technology.

5. Utatuzi wa shida

Hakuna Nguvu: Ensure batteries are correctly installed and charged. Check the power button.
Hakuna Ishara: Verify that the receiver is properly bound to the transmitter. Check antenna connections on both the transmitter and receiver. Ensure the correct model is selected on the transmitter.
Vidhibiti Visivyojibiwa: Calibrate gimbals and switches through the system settings. Check for any physical obstructions or damage to the gimbals.
Masuala ya Usasishaji wa Firmware: Ensure a stable USB connection to a Windows PC. Download the correct firmware version from the official WFLY webtovuti.

6. Vipimo

Kipengele	Vipimo
Vituo	16 linear channels
Azimio	4096
Mzunguko	2.4 GHz (FHSS, 64-point frequency hopping)
Muda wa Majibu	3.6ms
Onyesho	3.5-inch English color touch screen
Gimbal	Vijiti vya Sensor ya Ukumbi
Hifadhi ya Data	30 sets of model data
Program Mixes	10 seti
Servo Compatibility	180/270°
Maoni	Vibration feedback, Voice broadcast
Upanuzi Slot	JR bay expansion slot
Muunganisho	W.BUS, W.BUS2
Boresha	USB online upgrade (Windows only)
Utangamano wa Moduli	TBS Crossfire, JP 4 in 1, FrSky R9M
Aina ya Betri	18650 (haijajumuishwa)
Nyenzo	Nyenzo Mchanganyiko
Asili	China Bara
Umri uliopendekezwa	Miaka 14+

7. Vidokezo vya Mtumiaji

Urekebishaji wa Kawaida: Periodically calibrate your gimbals and switches to maintain optimal precision, especially after firmware updates or if you notice any drift.
Usimamizi wa Betri: Always use high-quality 18650 batteries and ensure they are fully charged before use. Consider carrying spare batteries for extended flying sessions.
Sasisho za Firmware: Keep your transmitter's firmware updated to benefit from new features, bug fixes, and improved performance. Always back up your model settings before performing an update.
Module Compatibility: When using external modules, ensure they are securely installed and compatible with your ET16S. Refer to the module's specific instructions for binding and setup.
Practice with Simulator: Before flying a real model, practice with a flight simulator connected to your ET16S via the trainer port. This helps build muscle memory and familiarization with controls.

8. Udhamini na Msaada

For warranty information, technical support, or service inquiries, please contact your retailer or the official WFLY support channels. Keep your proof of purchase for any warranty claims.

	Mwongozo wa Mtumiaji wa Mfumo wa Udhibiti wa Mbali wa WFLY ET16S Mwongozo wa kina wa mtumiaji wa mfumo wa udhibiti wa kijijini wa WFLY ET16S, maelezo ya sehemu, uendeshaji, tahadhari za usalama, mipangilio isiyofaa, na kufuata FCC. Inajumuisha vipimo vya kiufundi vya kisambaza data cha ET16 na kipokezi cha RF209S.
	Mwongozo wa Maelekezo ya Haraka wa WFLY ET10 - Mwongozo wa Mfumo wa Redio wa RC Mwongozo kamili wa mfumo wa redio wa WFLY ET10 RC, unaohusu usanidi, uendeshaji, usalama, na vipimo vya kiufundi. Jifunze kutumia kisambaza na kipokezi chako cha ET10 kwa ufanisi.
	WFLY WFT08X 8-Channel 2.4GHz RC Transmitter Mwongozo wa Mtumiaji Mwongozo huu wa mtumiaji unatoa maelekezo ya kina na miongozo ya usalama kwa mfumo wa kisambazaji kidhibiti cha redio cha WFLY WFT08X 8-channel 2.4GHz, usanidi wa kufunika, vipengele, utendakazi na tahadhari za usalama kwa miundo inayodhibitiwa kwa mbali.
	Mfumo wa Kisambazaji Redio cha WFLY X9 RC - Mwongozo wa Maagizo ya Haraka Mwongozo wa kina wa maagizo ya mfumo wa kisambaza redio cha WFLY X9 RC na kipokeaji cha RG206S. Inashughulikia usanidi, vipengele, kushindwa salama, kuunganisha, na mipangilio ya kituo kwa magari ya RC, boti na mizinga.
	Vipimo vya Seva ya Media ya NovaStar ET16S-G Detailed specifications for the NovaStar ET16S-G Media Server, covering features, hardware, software, product selection, optional items, applications, dimensions, and technical details for high-resolution video playback and processing.

WFLY ET16S