1. Utangulizi
The Haozee 24G MmWave Radar Smart Human Presence Sensor is an advanced device designed to detect human presence, including both motion and subtle stillness (e.g., sleeping), and ambient illumination. It offers intelligent control over lighting and other smart home devices, enhancing comfort and energy efficiency. This manual provides detailed instructions for the setup, operation, and maintenance of your sensor.
The sensor is available in two versions: a WiFi version for direct connection to your 2.4GHz WiFi network, and a ZigBee version that requires a compatible ZigBee hub (such as Tuya ZigBee hub or Home Assistant with zigbee2mqtt).
2. Kuweka
2.1 Unboxing
Upon opening the package, you should find the human presence sensor unit and a user guide. Please review the user guide for any additional specific instructions.
2.2 Muunganisho wa Umeme
The sensor requires an AC 95-250V power supply. It can also directly control a light switch with an output of AC 95-250V, 2A. Ensure all connections are secure and correct before applying power.
- Connect the Live (L) and Neutral (N) wires from your power supply to the corresponding terminals on the sensor.
- If connecting to a light, connect the Live Out (L1) and Neutral Out (N1) terminals from the sensor to your light fixture.
Chaguzi 2.3 za Kuweka
The sensor supports both ceiling and wall mounting. Choose the appropriate mounting method for your installation.
- Uwekaji Ukuta: The square model is designed for wall installation.
- Uwekaji wa dari: Round models are available for ceiling installation, with options for direct mounting or mounting with clips.
2.4 Kuoanisha Programu
To integrate your sensor with your smart home system, you need to pair it with the Tuya Smart or Smart Life app.
- Ensure the sensor is powered on.
- Long press the pairing button on the sensor until the indicator light flashes, indicating it's in pairing mode.
- Open the Tuya Smart or Smart Life app on your smartphone.
- Fuata maagizo ya ndani ya programu ili kuongeza kifaa kipya.
2.4.1 WiFi Version
The WiFi version connects directly to your 2.4GHz WiFi network. Ensure your phone is connected to the same 2.4GHz network during pairing.
2.4.2 ZigBee Version
The ZigBee version requires a ZigBee gateway (hub) to function. Ensure your ZigBee hub is already set up and connected to your app.
3. Maagizo ya Uendeshaji
3.1 Presence Detection
The 24G MmWave Radar technology allows for accurate detection of human presence, including subtle movements and even stillness (e.g., when someone is sleeping or reading quietly). The detection range is up to 6 meters with a 120-degree detection angle.
3.2 Illumination Detection (Lux Sensor)
The integrated lux sensor allows the device to detect ambient light levels. This feature can be used to create smart scenes, for example, turning on lights only when it's dark and someone is present.
3.3 Smart Light Switch Control
The sensor can be wired directly to control lights. Through the app, you can configure automated actions based on presence and illumination.
- Udhibiti wa Kiotomatiki: Set rules to turn lights on when presence is detected and off when no one is present.
- Customizable Delay: Adjust the delay time (e.g., 3s, 5s, 10s, up to 1800s) for lights to turn off after presence is no longer detected.
- Kubatilisha kwa Mwongozo: The wall mount version includes a physical button for manual light control.
3.4 App Remote Control & Smart Scenes
The Tuya Smart or Smart Life app provides real-time monitoring of presence status and allows for advanced customization:
- Hali ya Wakati Halisi: View current distance, presence time, and detection distance settings.
- Arifa za Push: Receive alerts on your phone when motion or presence is detected.
- Uundaji wa Scene: Link the sensor with other smart products to create complex automation scenarios (e.g., turn on AC when presence is detected, adjust lighting based on illumination and presence).
- Kushiriki Kifaa: Share control of the sensor with family members through the app.
4. Matengenezo
To ensure optimal performance and longevity of your Haozee Human Presence Sensor, follow these general maintenance guidelines:
- Kusafisha: Gently wipe the sensor's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the device.
- Mazingira: Install the sensor in a location free from excessive dust, moisture, or extreme temperatures, as specified in the operating conditions.
- Sasisho za Firmware: Periodically check the Tuya Smart or Smart Life app for available firmware updates to ensure your device has the latest features and security enhancements.
5. Utatuzi wa shida
- Kifaa hakioanishi:
- Ensure the sensor is powered correctly (AC 95-250V).
- For WiFi version, confirm your router is broadcasting a 2.4GHz network and your phone is connected to it during pairing.
- For ZigBee version, verify your ZigBee hub is online and properly configured in the app.
- Long press the pairing button on the sensor until the indicator light flashes to enter pairing mode.
- Light not turning on/off:
- Check all electrical connections (L, N, L1, N1) are secure and correct.
- Verify the light bulb is functional.
- Review the app settings for detection distance, sensitivity, illumination value, and output time to ensure they match your desired behavior.
- Ensure the 'Output mode' in the app is set to 'Auto' for automatic control.
- Inaccurate presence detection:
- Adjust the 'Motion Detection Sensitivity' and 'Motionless Detection Sensitivity' settings in the app. Higher sensitivity detects more subtle movements.
- Ensure the sensor's line of sight is not obstructed.
- Consider the mounting height and angle to optimize coverage within the 6m range and 120-degree angle.
- Wall mount version button not working:
- The wall mount version does have a physical button for manual light control. Ensure the sensor is powered and correctly wired. If the button is unresponsive, check power supply and app settings for any overrides.
6. Vipimo
| Kipengele | Vipimo |
|---|---|
| Ugavi wa Nguvu | AC 95 ~ 250V, 50 / 60Hz |
| Pato la Sasa | 2A |
| Masafa ya Ugunduzi | 6m |
| Pembe ya Kugundua | 120° |
| Umbali usio na waya | 45M |
| Wireless Protocol (WiFi) | IEEE 802.11b/g/n (GHz 2.4) |
| Wireless Protocol (ZigBee) | IEEE 802.15.4 (GHz 2.4) |
| Toleo la Bluetooth | Bluetooth 5.0 |
| Mzunguko wa Rada | 24GHz~24.25GHz |
| Joto la Kufanya kazi | -10℃ ～ 60℃ (14°F～140°F) |
| Unyevu wa Hifadhi | 1% ～ 85% RH (non condensing) |
| Product Size (Wall Mounting) | 86 x 86 x 28.5mm |
| Product Size (Mounting with Clip) | Ø 60 * 28.5mm |
| Product Size (Ceiling Mounting) | Ø 90 * 28.5mm |
| Uthibitisho | CE, RoHS |
| Smart Home Platform | Tuya |
| Sensor ya Lux | Imeungwa mkono |
| Mita ya Umbali | Imeungwa mkono |
7. Udhamini na Msaada
This product is certified with CE and RoHS standards, ensuring compliance with health, safety, and environmental protection directives.
For technical support, troubleshooting assistance, or warranty inquiries, please contact the seller or manufacturer directly through your purchase platform. Keep your proof of purchase for any warranty claims.
8. Vidokezo vya Mtumiaji
- Usalama wa Wiring: Always double-check all electrical connections before plugging in the power supply to prevent damage to the device or electrical hazards.
- Utangamano wa ZigBee Hub: If you have the ZigBee version, ensure your hub is compatible with Tuya devices or supports zigbee2mqtt for Home Assistant integration.
- Mtandao wa WiFi: For WiFi versions, remember that the sensor only supports 2.4GHz WiFi networks. Ensure your router is configured accordingly.
- Wall Mount Button: The wall mount version features a physical button that can be used for manual light control, offering a convenient override to automated settings.
- Marekebisho ya Unyeti: Experiment with the motion and motionless detection sensitivity settings in the app to find the optimal balance for your environment and avoid false triggers or missed detections.
