Manufacturer of electronic keyless door locks featuring password, RFID card, and fingerprint authentication for residential security.
DIGITAL LOCK produces a variety of electronic security solutions designed for modern homes and offices. Their product line includes digital auxiliary locks and main door locks, such as the LH5000F and Premium series.
These devices offer keyless entry convenience through multiple authentication methods, including numeric keypads, RF card sensors, and fingerprint scanners. Designed for durability and safety, DIGITAL LOCK products often feature automatic locking, high-temperature detection, and emergency power capabilities to ensure secure and reliable access control.
Miongozo ya hivi punde kutoka manuals+ imetungwa kwa chapa hii.
Maswali ya kawaida kuhusu miongozo, usajili, na usaidizi wa chapa hii.
Open the battery cover on the indoor unit and press the input/registration button. Enter your desired password (typically 3-12 digits) on the front keypad, then press '*' or the input button again to complete the registration.
If the internal batteries are fully discharged, you can use a 9V alkaline battery. Touch the 9V battery to the emergency power terminals on the outdoor unit, then enter your password or use your card to open the door.
Press the registration button (often found under the battery cover) as indicated in your specific manual (e.g., twice for some models). Press '1' if required, then hold the card near the reader. Press the registration button again to finish.
Press the Open/Close button for about 5 seconds, then press '1' on the keypad. A specific beep sequence will indicate if the lock has switched to Auto Mode (automatic locking when closed) or Manual Mode.
Enter the registration mode by pressing the button under the battery cover (check your manual for the specific sequence, e.g., pressing it twice). Press the specific command key (often '#') and hold it for 3 seconds to delete all registered cards.