BENINCÀ is a leading Italian manufacturer specializing in automation systems for gates, garage doors, and road barriers.
BENINCÀ serves as a benchmark in the automation industry, delivering Italian-made solutions for gates and doors. The company’s portfolio covers everything from heavy-duty industrial sliding gate motors to elegant residential swing gate operators.
Known for products like the NG'OMBE na BOB series, Benincà ensures safety and ease of installation. Their systems often feature built-in encoders for obstacle detection and energy-saving technologies. Whether you need to program a TO.GO remote or install a BISON industrial motor, the manuals below provide the necessary guidance for installation, maintenance, and troubleshooting.
Miongozo ya hivi punde kutoka manuals+ imetungwa kwa chapa hii.
Tazama usanidi, usakinishaji na utatuzi wa video za chapa hii.
Maswali ya kawaida kuhusu miongozo, usajili, na usaidizi wa chapa hii.
Most BENINCA operators feature a manual release mechanism. Insert the personalized key provided with the motor into the lock, turn it (usually anti-clockwise), and pull the release lever. This disengages the gears, allowing you to move the gate by hand.
To program a new transmitter, press and release the programming button (often labeled 'P' or 'PG') on the receiver unit. When the LED lights up, press the button on the remote you wish to pair within the allocated time (usually 5 seconds). The receiver typically blinks to confirm storage.
Yes, periodic checks are recommended. Ensure the gate track is clean, check that the rack and pinion are geared correctly (preserving a small gap), and verifying that safety devices like photocells and the emergency manual release are functioning correctly.
This may indicate the triggering of the amperometric sensor or encoder due to an obstacle or friction. Check the gate's path for debris, ensure the hinges/wheels are lubricated, and consult the control unit manual to adjust the force or sensitivity settings if necessary.