1. Taarifa Muhimu za Usalama
Tafadhali soma maagizo yote kwa uangalifu kabla ya kuunganisha na kutumia. Weka mwongozo huu kwa marejeleo ya baadaye.
- Hakikisha miunganisho yote iko salama kabla ya kutumia kifaa cha kuegemea.
- Weka watoto na wanyama kipenzi mbali na sehemu zinazosogea za sehemu ya kuegemea.
- Do not allow anyone to sit or stand on the footrest when it is extended.
- Epuka kuweka mikono au miguu karibu na njia ya kuegemea ili kuzuia kuumia.
- Do not expose the power cord or adapter to water or excessive heat.
- The maximum weight capacity for this recliner is 300 pounds (136 kg). Do not exceed this limit.
- Ondoa kiunganishi cha kuegemea kutoka kwenye soketi ya umeme kabla ya kusafisha au kufanya matengenezo yoyote.
2. Yaliyomo kwenye Kifurushi
Thibitisha kuwa vipengele vyote vipo kabla ya kuanza mkusanyiko:
- Nyuma ya nyuma (1)
- Msingi wa Kiti (1)
- Arm Pads (2)
- Adapta ya Nguvu (1)
- Udhibiti wa Kijijini (1)
- Hardware Pack (screws, washers, Allen wrench) (1)
3. Maagizo ya Mkutano
Follow these steps to assemble your Pipishell Power Recliner Chair. Assembly typically takes approximately 15-20 minutes.
- Fungua Vipengee: Ondoa kwa uangalifu sehemu zote kutoka kwenye kifungashio na uziweke kwenye uso laini na safi ili kuzuia uharibifu.
- Attach Arm Pads: Slide the arm pads onto the metal brackets on the sides of the seat base until they click securely into place. Ensure they are firmly attached.
- Unganisha Backrest: Align the backrest with the metal receivers on the seat base. Push down firmly until the backrest locks into position. You should hear a click.
- Unganisha Nguvu: Locate the power cable extending from the chair and connect it to the power adapter. Plug the power adapter into a standard electrical outlet.
- Muunganisho wa Mbali: Connect the remote control cable to the corresponding port on the side of the chair. The remote can be stored in the side pocket when not in use.
4. Maagizo ya Uendeshaji
The Pipishell Power Recliner Chair features an electric reclining system controlled by a user-friendly remote.
4.1 Kazi za Udhibiti wa Mbali
- Recline Button (Up Arrow): Press and hold to smoothly recline the backrest and extend the footrest. Release the button to stop at your desired position.
- Upright Button (Down Arrow): Press and hold to smoothly return the backrest to an upright position and retract the footrest. Release the button to stop at your desired position.
- Reset Button (Hand Icon): Press this button to return the chair to its fully upright, closed position.
4.2 Infinite Reclining System
Unlike traditional recliners with fixed positions, this power recliner offers an infinite reclining system. You can adjust the backrest from 105° to 150° and the footrest from 0° to 90°, allowing you to find your perfect angle for reading, watching TV, napping, or relaxing.
4.3 Sifa za Bidhaa
- Muundo Mkubwa: The chair features a generous 19.7" wide seat and a 62.6" extended recline, providing ample space for full-body relaxation.
- Nyenzo za Kulipiwa: Constructed with high-density foam, plush cotton padding, and independent springs for durability and comfort. The soft chenille fabric offers a cozy feel.
- Ujenzi Imara: Built with a solid steel frame for long-term stability and reliable support.
4.4 Video ya Bidhaa
5. Matengenezo
Proper care and maintenance will extend the life of your recliner.
- Kusafisha kitambaa: For general cleaning, use a soft brush or vacuum cleaner with an upholstery attachment to remove dust and loose debris. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild upholstery cleaner according to the product instructions, testing on an inconspicuous area first.
- Utunzaji wa Utaratibu: Periodically check all bolts and screws to ensure they are tight. Do not lubricate the reclining mechanism unless specifically instructed by the manufacturer.
- Vipengele vya Umeme: Ensure the power cord and adapter are free from damage. Do not attempt to repair electrical components yourself.
6. Utatuzi wa shida
If you encounter any issues with your recliner, refer to the following table for common problems and solutions:
| Tatizo | Sababu inayowezekana | Suluhisho |
|---|---|---|
| Kifaa cha kuegemea hakifanyi kazi. | Hakuna umeme au muunganisho uliolegea. | Check if the power adapter is securely plugged into both the chair and the wall outlet. Ensure the wall outlet is functional. Verify the remote control cable is firmly connected. |
| Recliner hutoa kelele zisizo za kawaida. | Loose hardware or obstruction in mechanism. | Inspect for any loose bolts or screws and tighten them. Check for any objects obstructing the reclining mechanism. |
| Footrest does not extend/retract fully. | Kizuizi au suala la utaratibu. | Ensure there are no obstructions under or around the footrest. If the issue persists, contact customer support. |
7. Vipimo
| Kipengele | Maelezo |
|---|---|
| Chapa | Pipishell |
| Jina la Mfano | MSSS10 |
| Rangi | Kijivu |
| Nyenzo | Metal (Frame), Chenille Fabric (Upholstery) |
| Vipimo vya Bidhaa (D x W x H) | 26.2"D x 27.6"W x 37.4"H |
| Uzito wa Kipengee | Pauni 80 (kilo 36.3) |
| Mapendekezo ya Uzito wa Juu | Pauni 300 (kilo 136) |
| Recline Angle Range | 105 ° hadi 150 ° |
| Footrest Angle Range | 0 ° hadi 90 ° |
| Vipengee vilivyojumuishwa | Arm Pad, Backrest, Cushion, Hardware |
| Mkutano Unaohitajika | Ndiyo |
8. Udhamini na Msaada
For warranty information or technical support, please refer to the product packaging or contact Pipishell customer service directly. Keep your purchase receipt for any warranty claims.