1. Utangulizi
Thank you for choosing Brightever Under Cabinet Lights. These LED rechargeable lights are designed to provide convenient and efficient illumination for various indoor spaces such as kitchens, bedrooms, closets, and hallways. Featuring motion sensor capabilities, stepless dimming, and multiple installation options, these lights enhance visibility and energy efficiency in your home.
2. Ni nini kwenye Sanduku
- 5 x Brightever Under Cabinet Lights
- Mwongozo wa Maagizo
- Mounting Hardware (screws and expansion anchors)
- Sahani za Metal Adhesive
- 3 x Kebo za Kuchaji za USB
- Warranty/Explanation Sheet
3. Maelezo ya Bidhaa
| Kipengele | Vipimo |
|---|---|
| Chapa | Kung'aa zaidi |
| Nambari ya Mfano | YS-CGD20-01 |
| Joto la Rangi | 6500K (Nyeupe Iliyopoa) |
| Uwezo wa Betri | 1500mAh (Inachajiwa tena) |
| Mwangaza | 150 Lumen |
| Upeo wa Upeo | 10% -100% Dimming Bila Hatua |
| Pembe ya Utambuzi wa Kihisi Mwendo | 120° |
| Masafa ya Kihisi cha Mwendo | 10FT |
| Auto-Off Time (Motion Sensor Mode) | Sekunde 20 za kutokuwa na shughuli |
| Muda wa Kuchaji | Masaa 3-4 kwa malipo kamili |
| Battery Life (Always On Mode) | Up to 10 hours (at 100% brightness) |
| Battery Life (Motion Sensor Mode) | 35-60 days (sensing 10-20 times/day) |
| Nyenzo | Akriliki, Alumini, Plastiki |
| Vipimo vya Kipengee (L x W x H) | 7.78"L x 1.57"W x 0.39"H |
| Matumizi ya Ndani/Nje | Ndani |
4. Kuweka na Kuweka
The Brightever Under Cabinet Lights offer three convenient installation methods:
Method 1: Magnetic Attachment
The lights have built-in powerful magnets. If your desired mounting surface is ferromagnetic (e.g., a metal refrigerator or shelf), you can directly attach the light to it.
Method 2: Adhesive Metal Plate
For non-ferromagnetic surfaces, use the provided adhesive metal plates.
- Clean the installation area thoroughly to ensure it is dry and free of dust.
- Peel off the protective film from the adhesive side of the metal plate.
- Attach the metal plates to the desired location. Ensure they are aligned with the magnets on the back of the light.
- Snap the light onto the attached metal plates.
Method 3: Screw Mounting
For a more permanent installation, use the provided screws and expansion anchors.
- Mark two holes at the mounting spot, spacing them to match the width of the light bar's mounting points.
- Drill holes at the marked spots. Insert the expansion anchors.
- Secure the metal plates with screws into the anchors.
- Mount the light onto the secured metal plates.
Mwongozo wa Video ya Ufungaji
Video: Official Brightever guide demonstrating the installation process and various features of the under cabinet lights.
5. Maagizo ya Uendeshaji
The under cabinet lights feature a user-friendly button for control.
Washa/Zima na Uteuzi wa Hali
- Bonyeza mara moja: To power on the light.
- Bonyeza tena: To switch to Motion Sensor Mode.
- Press a third time: To shut down the light.
Kufifia bila Hatua
While the light is on (in either mode), long press the button to steplessly adjust the brightness from 10% to 100%. The light features a memory function that retains the last set brightness level.
Modi ya Sensor ya Mwendo
In Motion Sensor Mode, the light automatically detects human activity within a 120° detection angle and a 10FT sensing range. It will turn off after 20 seconds of inactivity to conserve energy.
Kuchaji Taa
The lights are equipped with a 1500mAh rechargeable battery. Use the provided USB charging cables for optimal performance.
- Connect the USB charging cable to the USB-C port on the light.
- A red indicator light will show that the device is charging.
- The indicator light will turn green when fully charged (approximately 3-4 hours).
- A full charge provides up to 10 hours of light in Always On Mode (at 100% brightness) or 35-60 days in Motion Sensor Mode (based on 10-20 detections per day).
6. Matengenezo
- Kusafisha: Futa uso wa mwanga na kitambaa laini, kavu. Usitumie visafishaji vya abrasive au vimumunyisho.
- Utunzaji wa Betri: To prolong battery life, avoid fully discharging the battery frequently. Recharge the lights when the brightness noticeably diminishes.
- Hifadhi: If storing the lights for an extended period, charge them fully and store in a cool, dry place. Recharge every 3-6 months to maintain battery health.
7. Utatuzi wa shida
- Mwanga hauwashi:
- Hakikisha betri imechajiwa. Unganisha kwenye chanzo cha umeme kwa kutumia kebo ya USB iliyotolewa.
- Check if the light is in the correct operating mode (Always On or Motion Sensor). Press the button to cycle through modes.
- Motion sensor is not detecting movement:
- Hakikisha kuwa sensor haijazuiliwa.
- Verify the light is in Motion Sensor Mode.
- Avoid positioning multiple sensors too closely, as this may interfere with operation.
- The detection range is 10FT and angle is 120°. Ensure movement occurs within this area.
- Betri huisha haraka:
- Ensure the light is fully charged (indicator turns green).
- In Motion Sensor Mode, frequent activations will consume more battery.
- Ensure you are using the provided charging cables. Other cables may not be compatible and could affect charging efficiency or battery lifespan.
- Mwanga ni hafifu sana au mkali sana:
- Long press the button to adjust the brightness using the stepless dimming feature.
8. Taarifa za Usalama
- Usitenganishe au kurekebisha bidhaa.
- Weka mbali na maji na mazingira ya unyevu mwingi.
- Usiwaache kwenye jua moja kwa moja au joto kali.
- Weka mbali na watoto.
- Tupa betri kulingana na kanuni za mitaa.
9. Udhamini na Msaada
Brightever is committed to providing quality products and customer satisfaction. For any questions, concerns, or support needs regarding your under cabinet lights, please refer to the included Warranty/Explanation Sheet or contact Brightever customer service. We strive to offer friendly and helpful services.