Fein Cordless Angle Grinder CCG 18-115-12 AS Instruction Manual

1. Utangulizi

This manual provides essential information for the safe and effective operation, setup, and maintenance of your Fein Cordless Angle Grinder CCG 18-115-12 AS. This powerful and dust-resistant tool is designed for cutting, grinding, and deburring work on various materials. It features an 18V brushless motor, a 115 mm grinding wheel diameter, and is compatible with AMPShare ProCORE batteries.

2. Maagizo ya Usalama

Daima zingatia tahadhari zifuatazo za usalama ili kuzuia kuumia na uharibifu wa chombo:

• Vaa Vifaa vya Kinga vya Kibinafsi (PPE): Daima tumia miwani ya usalama, kinga ya kusikia, glavu, na barakoa ya vumbi.
• Sehemu ya kazi salama: Ensure the material being worked on is firmly clampImefunikwa au kufungwa ili kuzuia mwendo wakati wa operesheni.
• Dumisha Mshiko Ufaao: Hold the angle grinder firmly with both hands, ensuring a stable stance.
• Angalia uharibifu: Before each use, inspect the tool, battery, and accessories for any damage. Do not use damaged equipment.
• Tumia Nyenzo Sahihi: Only use grinding and cutting discs that are rated for the tool's speed and diameter (115 mm).
• Adjust Guard: Ensure the protective guard is correctly positioned to deflect sparks and debris away from you.
• Epuka Kupindukia: Maintain balance and control at all times.
• Weka Eneo la Kazi Wazi: Remove flammable materials and ensure adequate ventilation.
• Ondoa Nguvu: Ondoa pakiti ya betri kila wakati kabla ya kufanya marekebisho yoyote, kubadilisha vifuasi au kufanya matengenezo.
• Anzisha tena Ulinzi: The tool features restart protection. If power is interrupted, the tool will not restart automatically when power is restored.
• Electronic Overload Protection: The tool will shut off if overloaded to prevent damage. Reduce pressure and allow the tool to cool.

3. Yaliyomo kwenye Kifurushi

Thibitisha kuwa vipengee vyote vipo kwenye kifurushi:

• 1 x Fein Cordless Angle Grinder CCG 18-115-12 AS
• 1 x Separation Protection Cover
• 1 x Tool-free Quick Release Nut
• 1 x Anti-vibration Handle
• 1 x Key (for disc changes if not using quick release)
• 1 x Plastic Tool Box (L-BOXX 238)

4. Kuweka

Before operating the angle grinder, ensure it is properly assembled and configured.

4.1 Ufungaji wa Betri

1. Ensure the battery is fully charged. The Fein Cordless Angle Grinder is compatible with all 18V AMPShare ProCORE batteries.
2. Panga kifurushi cha betri na mlango wa betri kwenye kifaa.
3. Telezesha betri kwenye mlango hadi ibofye mahali pake kwa usalama.
4. Ili kuiondoa, bonyeza kitufe cha kutolewa kwenye betri na utelezeshe nje.

4.2 Marekebisho ya Walinzi

The separation protection cover must always be used. Adjust its position to provide maximum protection for the specific application.

• Loosen the guard's locking mechanism.
• Rotate the guard to the desired position, ensuring it deflects sparks and debris away from the operator.
• Tighten the locking mechanism securely.

4.3 Disc Installation (Grinding/Cutting)

Always ensure the battery is removed before changing discs.

1. Bonyeza na ushikilie kitufe cha kufunga spindle.
2. If using the tool-free quick release nut: Unscrew the quick release nut by hand. Remove the old disc and the lower flange.
3. Place the new 115 mm grinding or cutting disc onto the spindle, ensuring it sits correctly on the lower flange.
4. Screw the quick release nut back on and tighten it firmly by hand. Release the spindle lock.
5. If using a standard nut and key: Use the provided key to loosen and tighten the nut.

Image: A user demonstrating the installation of a grinding disc onto the angle grinder. The tool-free quick release nut is visible.

4.4 Anti-vibration Handle Attachment

Attach the anti-vibration handle to either side of the gear housing for improved comfort and control during operation.

• Screw the anti-vibration handle into one of the threaded holes on the side of the grinder head.
• Tighten it securely by hand.

5. Maagizo ya Uendeshaji

Familiarize yourself with the tool's controls and proper operating techniques.

5.1 Powering On/Off and Speed Preselection

• Inawasha: Slide the power switch forward. The tool features a soft start function for smooth power-up.
• Kuzima Slide the power switch backward to the OFF position.
• Electronic Speed Preselection: Use the speed dial to select the desired idle speed between 2,500 and 8,500 min⁻¹. Adjust the speed according to the material and application.

5.2 Mbinu za Kukata na Kusaga

Always maintain a firm grip and stable body position. Let the tool do the work; avoid excessive pressure.

Image: A worker grinding a metal bar with the Fein angle grinder, demonstrating proper technique and safety gear.

• Kusaga: Apply light, even pressure. Move the grinder smoothly across the surface. The tool's vibration damper helps ensure smooth operation.
• Kukata: For cutting, use a cutting disc and ensure the workpiece is securely clamped. Make straight cuts, allowing the disc to cut without forcing it.

Image: A worker cutting a metal pipe with the Fein angle grinder, showing the sparks generated during the process.

Image: A worker performing a cutting operation on a metal bar with the Fein angle grinder, highlighting the tool's performance.

Vipengele 5.3 vya Juu

• Blocking Monitoring: The tool is equipped with blocking monitoring, which helps prevent kickback if the disc jams.
• Ufuatiliaji wa halijoto: Innovative cooling fin technology and temperature monitoring protect the motor and battery from overheating during intensive use.

6. Matengenezo

Matengenezo ya mara kwa mara huhakikisha uimara na utendaji bora wa kinu chako cha pembe.

• Kusafisha: The robust motor housing is designed to be dust resistant. Regularly clean the tool's ventilation slots and exterior with a soft brush or compressed air to remove dust and debris. Ensure the battery is removed before cleaning.
• Ukaguzi wa Diski: Before each use, inspect grinding and cutting discs for cracks, chips, or excessive wear. Replace damaged or worn discs immediately.
• Utunzaji wa Betri: Store batteries in a cool, dry place. The Coolpack 2.0 technology helps extend battery life; however, avoid fully discharging batteries and charge them regularly.
• Ukaguzi wa Jumla: Periodically check all screws and fasteners for tightness. Ensure the guard operates smoothly and locks securely.

7. Utatuzi wa shida

Rejelea sehemu hii kwa maswala ya kawaida na suluhisho zao.

8. Vipimo

Technical data for the Fein Cordless Angle Grinder CCG 18-115-12 AS:

• Mfano: CCG 18-115-12 AS
• Betri Voltage: 18 V
• Upatanifu wa Betri: Li-ion/ProCORE Li-ion (AMPShare compatible)
• Motor: Bila brashi
• Kasi ya Uvivu: 2,500 - 8,500 min⁻¹ (stepless electronic speed preselection)
• Kipenyo cha Gurudumu la Kusaga: 115 mm
• Elastic Sanding Disc Diameter: 115 mm
• Flanges: M 14
• Uzito (bila betri): 2.20 kg
• Vipimo vya Bidhaa (L x W x H): 35.7 x 25.3 x 44.2 cm
• Nyenzo: Metal, aluminium, copper, plastic
• Kazi: Soft start, Restart protection, Electronic overload protection, Electronic speed preselection, Blocking monitoring, Vibration damper (4 additional), Temperature monitoring (Coolpack 2.0 technology)

9. Udhamini na Msaada

For warranty information, technical support, or service inquiries, please refer to the official Fein website or contact your authorized Fein dealer. Keep your purchase receipt as proof of purchase.

Rasmi ya Fein Webtovuti: www.fein.com