aigo AF12 3-in-1 ARGB Fan Kit Instruction Manual

Utangulizi

This manual provides detailed instructions for the installation, operation, and maintenance of your aigo AF12 3-in-1 ARGB Fan Kit. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.

Vipengele vya Bidhaa

The aigo AF12 3-in-1 ARGB Fan Kit offers efficient cooling and customizable lighting for your computer system. Key features include:

• Mfano: AF123IN1-BK
• Idadi ya Mashabiki: 3 x 120mm fans
• Kasi ya shabiki: 800-2000 RPM (± 10%)
• Fan Noise Level: ≤30dBA
• Mtiririko wa Hewa: 86.6 CFM
• Shinikizo tuli: 1.27mm-H²O
• Working Current (Motor): ≤0.2A (12V)
• Working Current (Light): ≤0.48A (5V)
• Vipimo: 120 x 120 x 25 mm
• Mwangaza wa ARGB: Addressable RGB lighting for customizable effects.

Yaliyomo kwenye Kifurushi

Thibitisha kuwa bidhaa zote zilizoorodheshwa hapa chini zipo kwenye kifurushi chako:

• 3 x aigo AF12 ARGB Fans
• Kuweka Screws
• ARGB Controller (if included in kit)
• Cables (Power, ARGB Sync)

Mwongozo wa Ufungaji

Follow these steps to properly install your aigo AF12 ARGB fans into your computer case.

1. Tayarisha Mfumo Wako: Power off your computer and disconnect it from the power source. Open your computer case.
2. Identify Mounting Locations: Determine the desired locations for your fans (e.g., front, top, rear, bottom of the case). Ensure proper airflow direction.
3. Panda Mashabiki: Position each fan in its chosen location. Use the provided mounting screws to secure the fans to the case. Ensure the fan blades are not obstructed.
   

   Image: An aigo AF12 fan viewed from an angle, highlighting the mounting points on its corners. This illustrates how the fan is secured.
4. Unganisha Kebo za Nguvu: Connect the 3-pin power connector from each fan to an available fan header on your motherboard or fan controller.
5. Connect ARGB Cables: Connect the ARGB cable from each fan to the ARGB controller (if applicable) or directly to a compatible 5V 3-pin ARGB header on your motherboard. Ensure correct pin orientation to avoid damage.
   

   Picha: Mtaalam wa upandefile of the aigo AF12 fan, illustrating the thickness and potential locations for cable connections on the frame.

6. Usimamizi wa Cable: Route cables neatly to prevent interference with other components and to improve airflow.
7. Funga Kipochi na Uwashe: Funga kisanduku cha kompyuta yako, unganisha tena umeme, na uwashe mfumo wako.

Maagizo ya Uendeshaji

Once installed, your aigo AF12 ARGB fans will operate automatically based on your system's fan control settings. The ARGB lighting can be controlled via your motherboard's software or a dedicated ARGB controller.

Udhibiti wa Kasi ya Mashabiki

Fan speed can typically be adjusted through your motherboard's BIOS/UEFI settings or through fan control software provided by your motherboard manufacturer. Refer to your motherboard manual for specific instructions.

Udhibiti wa Taa za ARGB

If connected to a 5V 3-pin ARGB header on your motherboard, use your motherboard's ARGB synchronization software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) to customize lighting effects, colors, and patterns.

If using a dedicated ARGB controller (often included with fan kits), refer to the controller's specific instructions for lighting adjustments.

Matengenezo

Regular maintenance ensures optimal performance and extends the lifespan of your fans.

• Kusafisha vumbi: Periodically clean dust from the fan blades and housing using compressed air or a soft brush. Ensure the system is powered off before cleaning.
• Ukaguzi wa Cable: Verify that all cables are securely connected and free from damage.
• Ufuatiliaji wa Kelele: Listen for unusual noises, which may indicate a fan bearing issue or obstruction.

Kutatua matatizo

If you encounter issues with your aigo AF12 ARGB fans, refer to the following common solutions:

Mashabiki Hawazunguki

• Angalia Muunganisho wa Nishati: Ensure the fan's 3-pin power connector is securely plugged into the motherboard or controller.
• Check BIOS Settings: Verify that fan headers are enabled in your motherboard's BIOS/UEFI settings.
• Test Another Header: Try connecting the fan to a different fan header to rule out a faulty header.

ARGB Lights Not Working

• Check ARGB Connection: Ensure the 5V 3-pin ARGB connector is correctly and securely plugged into the motherboard or controller. Verify the pin orientation.
• Check Software: Confirm that your motherboard's ARGB software is installed and configured correctly.
• Utangamano: Ensure your motherboard has a compatible 5V 3-pin ARGB header. This product is not compatible with 12V 4-pin RGB headers.

Kelele Zilizozidi

• Angalia Vizuizi: Hakikisha hakuna nyaya au vipengele vingine vinavyogusa vile vya feni.
• Vipimo vya Kuweka: Verify that all mounting screws are tightened to prevent vibrations.
• Uundaji wa vumbi: Safisha vumbi lolote kutoka kwa vile vya feni.

Vipimo vya Kiufundi

Udhamini na Msaada

This aigo product comes with a dhamana ya miezi 12 kutoka tarehe ya ununuzi, kufunika kasoro za utengenezaji.

For technical support, warranty claims, or further assistance, please visit the official aigo store or contact their customer service through the details provided on their webtovuti.

Official aigo Store: aigo Store on Amazon