Mwongozo wa Maelekezo ya Kisafishaji cha Bwawa cha Robotic cha BWT Cosmy The Bot 250

1. Utangulizi

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your BWT Cosmy The Bot 250 Robotic Pool Cleaner. Please read this manual thoroughly before using the product and retain it for future reference.

The BWT Cosmy The Bot 250 is designed for effective pool cleaning, featuring powerful suction and efficient navigation. Its design facilitates easy handling, and the adjustable suction power allows for adaptation to various debris types.

Image 1.1: The BWT Cosmy The Bot 250 Robotic Pool Cleaner, shown with a smartphone displaying its remote control application.

2. Taarifa za Usalama

Daima fuata tahadhari za usalama ili kupunguza hatari ya kuumia au uharibifu:

• Ensure the power supply is disconnected before performing any maintenance or cleaning on the unit.
• Do not operate the cleaner if the power cable is damaged. Contact qualified service personnel for repair.
• Weka watoto na wanyama wa kipenzi mbali na eneo la bwawa wakati kisafishaji kinafanya kazi.
• Only use the cleaner in water temperatures between 10°C (50°F) and 35°C (95°F).
• Do not use the cleaner if there are people in the pool.
• Hakikisha kisafishaji kimezama kabisa kabla ya kuanza kazi.
• Avoid lifting the cleaner by its cable. Always use the handle provided.

3. Vipengele vya Bidhaa

The BWT Cosmy The Bot 250 Robotic Pool Cleaner consists of the following main components:

• Sehemu kuu: The robotic cleaner body, housing the motor and filtration system.
• Kichujio cha Kuchuja: Removable basket for collecting debris.
• Brashi/Roli: Located on the underside for scrubbing pool surfaces.
• Kebo ya Kuelea: Connects the cleaner to the power supply unit.
• Kitengo cha Ugavi wa Nguvu: Converts AC power to safe DC power for the cleaner.

Picha 3.1: Mbele view of the cleaner, highlighting the cleaning brushes and intake area.

Picha 3.2: Chini view of the cleaner, illustrating the tracks and brush system for pool surface navigation and cleaning.

Picha 3.3: Ndani view of the cleaner, showing the gear and motor components responsible for its movement and cleaning action.

4. Kuweka

1. Fungua Kisafishaji: Ondoa kwa uangalifu kisafishaji na vifaa vyote kutoka kwenye kifungashio.
2. Connect the Floating Cable: Connect the floating cable to the power supply unit. Ensure the connection is secure.
3. Mahali katika Bwawa: Gently lower the cleaner into the pool. Allow it to sink to the bottom. Ensure there are no air bubbles trapped inside the unit.
4. Position Power Supply: Place the power supply unit at least 3.5 meters (11.5 feet) from the edge of the pool, ensuring it is not exposed to direct sunlight or excessive moisture.
5. Chomeka: Chomeka kitengo cha usambazaji wa nishati kwenye kituo cha umeme kilichowekwa msingi.

5. Maagizo ya Uendeshaji

1. Anza Mzunguko wa Kusafisha: Press the power button on the power supply unit or use the remote control application (if applicable) to start the cleaning cycle. The cleaner will begin its programmed cleaning routine.
2. Rekebisha Nguvu ya Kunyonya: The Cosmy The Bot 250 features adjustable intake valves. To increase or decrease suction power, manually adjust the height of the intake valves located on the underside of the unit. This allows for optimized debris collection.
3. Fuatilia Usafishaji: The cleaner will navigate the pool floor and walls (depending on model features) to collect debris. Cleaning cycles are designed to be efficient and consume less energy.
4. End Cleaning Cycle: Once the cleaning cycle is complete, or if you wish to stop it manually, press the power button again.
5. Remove from Pool: Carefully pull the cleaner out of the water using its handle. Do not pull by the floating cable. Allow excess water to drain before placing it on a flat surface.

6. Matengenezo

Matengenezo ya mara kwa mara huhakikisha utendakazi bora na huongeza muda wa maisha wa kisafishaji chako cha kuogelea cha roboti.

6.1. Kusafisha Kikapu cha Kichujio

An indicator light will illuminate when the filter basket is full and requires cleaning.

1. Ondoa Nguvu: Always unplug the power supply unit from the electrical outlet before cleaning.
2. Fungua Chumba cha Kichujio: Locate the filter access button/latch on the top of the cleaner and open the lid.
3. Ondoa Kikapu cha Kichujio: Grasp the handle of the filter basket and lift it out of the cleaner.
4. Suuza Kichujio: Use a garden hose to thoroughly rinse the filter basket, removing all trapped debris. Ensure all mesh surfaces are clear.
5. Weka tena Kichujio: Place the clean filter basket back into the cleaner, ensuring it is properly seated.
6. Funga Kifuniko: Close the filter compartment lid securely.

Picha 6.1: Juu view of the cleaner with the filter compartment open, showing the filter basket inside.

Image 6.2: The filter basket removed from the cleaner, ready for rinsing.

6.2. Usafishaji na Uhifadhi wa Jumla

• After each use, rinse the cleaner with fresh water to remove any pool chemicals or debris.
• Inspect the brushes and tracks for any tangled debris (hair, leaves, etc.) and remove them.
• Store the cleaner in a cool, dry place, away from direct sunlight and extreme temperatures.
• Coil the floating cable loosely to prevent kinks or damage.

7. Utatuzi wa shida

If you encounter issues with your BWT Cosmy The Bot 250, refer to the following common problems and solutions:

Tatizo likiendelea baada ya kujaribu suluhu hizi, tafadhali wasiliana na usaidizi kwa wateja.

8. Vipimo

9. Udhamini na Msaada

For warranty information and customer support, please refer to the documentation included with your purchase or contact the manufacturer directly:

Mtengenezaji: STEWARD GROUP, LLC

Please have your model number (Cosmy The Bot 250, RURN-NOYO-S2M70) and purchase date available when contacting support.