Utangulizi
Thank you for choosing the WORKPRO LED Work Light (Model W130016A). This versatile and durable work light is designed to provide bright, reliable illumination for a wide range of tasks and environments. Featuring multiple light modes, a rotatable stand, strong magnetic base, and power bank functionality, it is an essential tool for professionals and DIY enthusiasts alike. Please read this manual carefully before use to ensure proper operation and maintenance.
Figure 1: WORKPRO LED Work Light (Model W130016A)
Vipengele vya Bidhaa
- Njia Nne za Mwanga: High, Medium, Low, and Flashing modes to suit various lighting requirements.
- 180° Stendi Inayoweza Kuzungushwa: Adjustable stand with 7 locking positions allows for precise light angle adjustment.
- Rechargeable & Power Bank Function: Equipped with two built-in 3.7V, 2000mAh batteries. Features a Type-C input for charging the light and a USB-A output to function as a power bank for other devices.
- Msingi wenye Nguvu wa Sumaku: Four N42 magnets on the back allow secure attachment to metal surfaces, providing hands-free operation.
- Ujenzi wa kudumu: Made from Acrylonitrile Butadiene Styrene (ABS) and metal with TPR soft rubber for corrosion, wear, and impact resistance.
- Inayozuia maji na isiyoshtua: Designed to withstand challenging environments, passing high and low temperature tests.
Kielelezo cha 2: Vipengele Muhimu Vimekwishaview
Kuweka na Kuchaji
Malipo ya Awali
Before first use, fully charge the WORKPRO LED Work Light. Connect the provided Type-C charging cable to the light's input port and to a compatible USB power adapter (not included). The charging indicator light will show red during charging and turn green when fully charged. A full charge typically takes approximately 3 hours.
Kazi ya Benki ya Nguvu
To use the work light as a power bank, open the protective cover on the back of the light. Connect your device's charging cable to the USB-A output port on the work light. The output indicator light will show blue when charging an external device.
Figure 3: Charging Ports and Power Bank Function
Figure 4: Power Bank in Use
Maagizo ya Uendeshaji
Washa/Zima na Uteuzi wa Hali
Locate the power button on the back of the work light. Press the button once to turn the light on to the High brightness mode. Subsequent presses will cycle through the modes in the following order: High > Medium > Low > Flashing. To turn the light off, press and hold the power button for 2 seconds, or cycle through all modes until the light turns off.
Figure 5: Light Modes and Operation
Adjusting the Stand and Magnetic Mounting
The integrated stand can be rotated 180° and features 7 adjustable locking positions. Adjust the stand to direct the light as needed. For hands-free use, utilize the four N42 magnets on the back of the light to attach it securely to any metal surface.
Figure 6: Adjustable Bracket
Figure 7: Magnetic Mounting in Use
Matengenezo
- Kusafisha: Futa taa kwa laini, damp kitambaa. Usitumie visafishaji vya abrasive au vimumunyisho.
- Hifadhi: Store the light in a cool, dry place away from direct sunlight when not in use for extended periods. Ensure the protective cover for the charging ports is securely closed.
- Utunzaji wa Betri: To prolong battery life, avoid fully discharging the battery frequently. Recharge the light regularly, even if not in active use.
Kutatua matatizo
| Tatizo | Sababu inayowezekana | Suluhisho |
|---|---|---|
| Nuru haiwashi. | Tatizo la betri ya chini au kitufe cha kuwasha/kuzima. | Charge the light fully. Ensure the power button is pressed correctly. |
| Pato la mwanga ni hafifu. | Low battery or incorrect mode. | Recharge the light. Cycle through modes to select a brighter setting. |
| Haiwezi kuchaji kifaa cha nje. | Work light battery is low or cable issue. | Ensure the work light is sufficiently charged. Try a different USB cable. |
Matatizo yakiendelea, tafadhali wasiliana na usaidizi kwa wateja.
Vipimo
- Mfano: W130016A
- Chanzo cha Nuru: COB LED
- Mwangaza: Hadi Lumens 2000 (Hali ya Juu)
- Njia za Mwanga: High, Medium, Low, Flashing
- Betri: 2 x 3.7V, 2000mAh Lithium-Ion (4000mAh total)
- Mlango wa Kuchaji wa Ingizo: Type-C (5V, 2A)
- Mlango wa Kuchaji Pato: USB-A (5V, 1A)
- Saa za Kazi: High: 2 hours, Medium: 3 hours, Low: 8 hours
- Nyenzo: Acrylonitrile Butadiene Styrene (ABS), Metal
- Vipengele Maalum: 180° Rotatable Stand, 4 N42 Magnets, Waterproof, Shockproof
- Mtengenezaji: HANGZHOU GREATSTAR INDUSTRIAL CO. LTD
- UPC: 820909691396
Video Rasmi ya Bidhaa
Video: Perfect Work Lights for Every Job (Duration: 1:44). This video demonstrates the features and versatility of the WORKPRO LED Work Light in various scenarios.
Udhamini na Msaada
For warranty information or technical support, please refer to the product packaging or contact WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.